/proc/mdstat
Erscheinungsbild
/proc/mdstat - Linux-RAID Status
Beschreibung
cat /proc/mdstat
- Kein RAID
Personalities : [raid1] unused devices: <none>
- RAID1
Personalities : [raid1] md2 : active raid1 sda3[2] sdb3[1] 234405504 blocks super 1.2 [2/2] [UU] bitmap: 0/2 pages [0KB], 65536KB chunk md1 : active raid1 sda2[2] sdb2[1] 523712 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[2] sdb1[1] 33521664 blocks super 1.2 [2/2] [UU] unused devices: <none>
- Ausgabe für ein RAID0 II
Die /boot-Partition md0 muss immer als RAID1 eingerichtet sein, um davon booten zu können
Personalities : [raid1] [raid0] md2 : active raid0 sda3[0] sdb3[1] 883956736 blocks super 1.2 512k chunks md1 : active raid0 sda2[0] sdb2[1] 52393984 blocks super 1.2 512k chunks md0 : active raid1 sda1[0] sdb1[1] 523264 blocks super 1.2 [2/2] [UU] unused devices: <none>
- Resync-Prozess
Wenn unter einer der Partitionen ein Fortschritts-Balken dargestellt wird, läuft derzeit ein RAID-Resync-Prozess:
md0 : active raid1 sdb1[0] sdc1[1] 2095040 blocks super 1.2 [2/2] [UU] [====>................] resync = 32.7% (418656/2095040) finish=4.2min speed=131219K/sec
Anwendung
Problembehebung
Anhang
Siehe auch
- Linux/RAID
- Linux/RAID/Alignment
- Linux/RAID/Aufgaben
- Linux/RAID/Benachrichtigung
- Linux/RAID/Erstellung
- Linux/RAID/Fehlerbehebung
- Linux/RAID/Howto
- Linux/RAID/Mounten
- Linux/RAID/Optimierung
- Linux/RAID/Partitionierung
- Linux/RAID/Recovery
- Linux/RAID/Status
- Linux/RAID/Superblock
- Linux/RAID/TMP
- Linux/RAID/Tools
- Linux/RAID/Vorbereitung
- Linux/RAID/Wartung
- Linux/RAID/remove
Dokumentation
- Man-Page
- Info-Pages
Links
Projekt
Weblinks