Linux/lmSensors
Problem
Sensoren des X570-Chipsatzes mit Ryzen werden nicht erkannt.
Lösung
- Kernel beim Starten Parameter 'acpi_enforce_resources=lax' übergeben
- Auf Debian-Systemen
- In Datei '/etc/default/grub' Variable 'GRUB_CMDLINE_LINUX_DEFAULT' um 'acpi_enforce_resources=lax' ergänzen
- Grub-Konfiguration aktualisieren
# update-grub
- Die Änderungen werden nach einem Neustart wirksam, danach sollten mehr Sensoren sichtbar sein:
# sensors nct6798-isa-0290 Adapter: ISA adapter in0: 1.30 V (min = +0.00 V, max = +1.74 V) in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in2: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM in5: 784.00 mV (min = +0.00 V, max = +0.00 V) ALARM in6: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.26 V (min = +0.00 V, max = +0.00 V) ALARM in9: 896.00 mV (min = +0.00 V, max = +0.00 V) ALARM in10: 392.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 496.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM in13: 984.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM fan1: 668 RPM (min = 0 RPM) fan2: 1597 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) fan6: 0 RPM (min = 0 RPM) fan7: 0 RPM (min = 0 RPM) SYSTIN: +38.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor CPUTIN: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +26.0°C sensor = thermistor AUXTIN1: +38.0°C sensor = thermistor AUXTIN2: +26.0°C sensor = thermistor AUXTIN3: +26.0°C sensor = thermistor PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C PCH_MCH_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled k10temp-pci-00c3 Adapter: PCI adapter Tdie: +43.6°C (high = +70.0°C) Tctl: +43.6°C