Linux/Netzwerk/Konfiguration: Unterschied zwischen den Versionen

Aktuelle Version vom 16. Dezember 2024, 13:43 Uhr

Linux/Netzwerk/Konfiguration

Beschreibung

3 ways to configure the network

The interfaces configuration file at /etc/network/interfaces (this page): for basic or simple configurations (e.g. workstation)
NetworkManager: This is the default for Laptop configuration
Systemd: Debian reference Doc Chapter 5

Bezüglich einer aktuellen Anleitung für Debian zum Thema Netzwerk lesen Sie Debian Administratorhandbuch — Konfigurieren des Netzwerks

Tipp

Unter systemd kann networkd für die Netzwerkverwaltung genutzt werden

siehe systemd-networkd(8)

Anhang

Siehe auch

/etc/network/interfaces

Links

Weblinks

https://wiki.debian.org/NetworkConfiguration

@@ Zeile 2: / Zeile 2: @@
 == Beschreibung ==
+; 3 ways to configure the network
+# The interfaces configuration file at /etc/network/interfaces (this page): for basic or simple configurations (e.g. workstation)
+# [https://wiki.debian.org/NetworkManager NetworkManager]: This is the default for Laptop configuration
+# Systemd: [https://www.debian.org/doc/manuals/debian-reference/ch05.en.html#_the_modern_network_configuration_without_gui Debian reference Doc Chapter 5]
 : Bezüglich einer aktuellen Anleitung für Debian zum Thema Netzwerk lesen Sie [https://www.debian.org/doc/manuals/debian-handbook/sect.network-config Debian Administratorhandbuch — Konfigurieren des Netzwerks]
@@ Zeile 8: / Zeile 13: @@
 :* siehe <tt>[[systemd-networkd]](8)</tt>
-== /etc/network/interfaces ==
+<noinclude>
-siehe [[/etc/network/interfaces]]
-== 3 ways to configure the network ==
-# The interfaces configuration file at /etc/network/interfaces (this page): for basic or simple configurations (e.g. workstation)
-# [https://wiki.debian.org/NetworkManager NetworkManager]: This is the default for Laptop configuration
-# Systemd: [https://www.debian.org/doc/manuals/debian-reference/ch05.en.html#_the_modern_network_configuration_without_gui Debian reference Doc Chapter 5]
-== Multiple addresses ==
-; Multiple IP addresses on one Interface
-Interface aliasing allows one interface to have multiple IP addresses. This is useful when more than one server is to be visible ''via'' the Internet. Note that virtual hosts can support multiple Apache servers with a single IP address. Apache responds to the domain name supplied by the client in the HTTP header. In many other situations, one external IP is needed for each server using a port.
-=== Legacy method ===
-This /etc/network/interfaces text assigns three IP addresses to eth0.
- auto eth0
- allow-hotplug eth0
- iface eth0 inet static
-  address 192.168.1.42/24
-  gateway 192.168.1.1
- auto eth0:0
- allow-hotplug eth0:0
- iface eth0:0 inet static
-  address 192.168.1.43/24
- auto eth0:1
- allow-hotplug eth0:1
- iface eth0:1 inet static
-  address 192.168.1.44/24
-An alias interface should not have "gateway" or "dns-nameservers"; dynamic IP assignment is permissible.
-The above configuration is the previous traditional method that reflects the traditional use of ''ifconfig'' to configure network devices. ''ifconfig'' has introduced the concept of ''aliased'' or ''virtual'' interfaces. Those types of virtual interfaces have names of the form ''interface:integer'' and ifconfig treats them very similarly to real interfaces.
-Nowadays ''ifupdown'' uses the ''ip'' utility from the ''iproute2'' package instead of ''ifconfig''. The newer ''ip'' utility does not use the same concept of aliases or virtual interfaces. However, it supports assigning arbitrary names to the interfaces (they're called labels). ''ifupdown'' uses this feature to support aliased interfaces while using ''ip''.
-=== iproute2 method ===
-Also, ''ifupdown'' supports specifying multiple interfaces by repeating ''iface'' sections with the same interface name. The key difference from the method described above is that all such sections are treated by ''ifupdown'' as just one interface, so user can't add or remove them individually. However, ''up''/''down'' commands, as well as scripts, are called for every section as it used to be.
-Note however that this method is '''dangerous'''! Certain driver/hardware combinations may sometimes fail to bring the link up if no labels are assigned to the alias interfaces. (Seen this on Debian Wheezy and Jessie with RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01) auto-negotiating to 10/full. A similar warning from another person exists in the history of this page.)
-This /etc/network/interfaces text assigns three IP addresses to eth0.
- auto eth0
- allow-hotplug eth0
- iface eth0 inet static
-  address 192.168.1.42/24
-  gateway 192.168.1.1
- iface eth0 inet static
-  address 192.168.1.43/24
- iface eth0 inet static
-  address 192.168.1.44/24
- # adding IP addresses from different subnets is also possible
- iface eth0 inet static
-  address 10.10.10.14/24
-Manual approach:
- auto eth0
- allow-hotplug eth0
- iface eth0 inet static
-  address 192.168.1.42/24
-  gateway 192.168.1.1
-  up ip addr add 192.168.1.43/24 dev $IFACE label $IFACE:0
-  down ip addr del 192.168.1.43/24 dev $IFACE label $IFACE:0
-  up ip addr add 192.168.1.44/24 dev $IFACE label $IFACE:1
-  down ip addr del 192.168.1.44/24 dev $IFACE label $IFACE:1
-  up ip addr add 10.10.10.14/24 dev $IFACE label $IFACE:2
-  down ip addr del 10.10.10.14/24 dev $IFACE label $IFACE:2
-<noinclude>
 == Anhang ==
 === Siehe auch ===
+* [[/etc/network/interfaces]]
 {{Special:PrefixIndex/{{BASEPAGENAME}}}}
 ==== Links ====
 ===== Weblinks =====
 # [https://wiki.debian.org/NetworkConfiguration https://wiki.debian.org/NetworkConfiguration]
-[[Kategorie:Linux/Netzwerk]]
+[[Kategorie:Linux/Netzwerk/Konfiguration]]
 </noinclude>