Ping: Unterschied zwischen den Versionen

Aktuelle Version vom 12. November 2024, 18:40 Uhr

ping - Prüft die Erreichbarkeit eines Netzwerkknotens durch Senden eines ICMP ECHO_REQUEST

Beschreibung

packed internet grouper

Prüft die Erreichbarkeit eines Netzwerkknotens durch Senden eines ICMP ECHO_REQUEST

ping prüft die Verbindung zu einem Zielsystem, indem es einen Echo Request sendet und einen Echo Reply erwartet

$ ping google.de
PING google.de(ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003)) 56 data bytes
64 bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=1 ttl=119 time=25.7 ms
64 bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=2 ttl=119 time=22.9 ms
64 bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=3 ttl=119 time=22.6 ms
64 bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=4 ttl=119 time=22.9 ms
64 bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=5 ttl=119 time=23.1 ms
^C
--- google.de ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
rtt min/avg/max/mdev = 22.572/23.416/25.650/1.130 ms

Installation

ping ist Teil des Pakets iputils-ping
sollte in jeder Installation enthalten sein

Aufruf

ping [-aAbBdDfhLnOqrRUvV46] [-c count] [-F flowlabel] [-i interval] [-I interface] [-l preload]
[-m mark] [-M pmtudisc_option] [-N nodeinfo_option] [-w deadline] [-W timeout] [-p pattern]
[-Q tos] [-s packetsize] [-S sndbuf] [-t ttl] [-T timestamp option] [hop...] {destination}

Anstelle der IP-Adresse kann auch ein Host-Name angegeben werden. Es wird dann versucht, diesen in eine DNS-Adresse aufzulösen.

$ ping OPTIONEN 10.10.0.1

Man muss ping entweder händisch stoppen (mit Strg + C ) oder mit der entsprechenden Option die Anzahl der gesendeten Pakete begrenzen.

Es gibt zwei Varianten des ping-Befehl

ping - für IPv4-Adressen
ping6 - für IPv6-Adressen

$ ping foxtom.de
PING foxtom.de (116.202.118.50) 56(84) bytes of data.
64 bytes from mx10.foxtom.de (116.202.118.50): icmp_seq=1 ttl=54 time=28.5 ms
64 bytes from mx10.foxtom.de (116.202.118.50): icmp_seq=2 ttl=54 time=22.7 ms
64 bytes from mx10.foxtom.de (116.202.118.50): icmp_seq=3 ttl=54 time=22.8 ms
^C
--- foxtom.de ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 22.685/24.664/28.471/2.692 ms

Optionen

Option	Beschreibung
-4	Use IPv4 only.
-6	Use IPv6 only.
-a	Audible ping.
-A	Adaptive ping. Interpacket interval adapts to round-trip time, so that effectively not more than one (or more, if preload is set) unanswered probe is present in the network. Minimal interval is 200msec unless super-user. On networks with low RTT this mode is essentially equivalent to flood mode.
-b	Allow pinging a broadcast address.
-B	Do not allow ping to change source address of probes. The address is bound to one selected when ping starts.
-c count	Stop after sending count ECHO_REQUEST packets. With deadline option, ping waits for count ECHO_REPLY packets, until the timeout expires.
-d	Set the SO_DEBUG option on the socket being used. Essentially, this socket option is not used by Linux kernel.
-D	Print timestamp (unix time + microseconds as in gettimeofday) before each line.
-f	Flood ping. For every ECHO_REQUEST sent a period “.” is printed, while for every ECHO_REPLY received a backspace is printed. This provides a rapid display of how many packets are being dropped. If interval is not given, it sets interval to zero and outputs packets as fast as they come back or one hundred times per second, whichever is more. Only the super-user may use this option with zero interval.
-F flow label	IPv6 only. Allocate and set 20 bit flow label (in hex) on echo request packets. If value is zero, kernel allocates random flow label.
-h	Show help.
-i interval	Wait interval seconds between sending each packet. Real number allowed with dot as a decimal separator (regardless locale setup). The default is to wait for one second between each packet normally, or not to wait in flood mode. Only super-user may set interval to values less than 0.2 seconds.
-I interface	interface is either an address, an interface name or a VRF name. If interface is an address, it sets source address to specified interface address. If interface is an interface name, it sets source interface to specified interface. If interface is a VRF name, each packet is routed using the corresponding routing table; in this case, the -I option can be repeated to specify a source address. NOTE: For IPv6, when doing ping to a link-local scope address, link specification (by the '%'-notation in destination, or by this option) can be used but it is no longer required.
-l preload	If preload is specified, ping sends that many packets not waiting for reply. Only the super-user may select preload more than 3.
-L	Suppress loopback of multicast packets. This flag only applies if the ping destination is a multicast address.
-m mark	use mark to tag the packets going out. This is useful for variety of reasons within the kernel such as using policy routing to select specific outbound processing.
-M pmtudisc_opt	Select Path MTU Discovery strategy. pmtudisc_option may be either do (prohibit fragmentation, even local one), want (do PMTU discovery, fragment locally when packet size is large), or dont (do not set DF flag).
-N nodeinfo_option	IPv6 only. Send ICMPv6 Node Information Queries (RFC4620), instead of Echo Request. CAP_NET_RAW capability is required.

Parameter

Umgebung

Paketaufbau

Rückgabewert

Anwendung

Option	Beispiel	Beschreibung
-c ANZAHL	$ ping -c 10 foxtom.de
-w ENDE	$ ping -w 15 foxtom.de
-W AUSZEIT	$ ping -W 015 foxtom.de
-i INTERVALL	$ ping -i 15 foxtom.de
-I SCHNITTSTELLE	$ ping -I enp2s0 ($ ip a)foxtom.de

Ping und MTU

Die im Befehl ping angegebene Größe entspricht der Anzahl der zu sendenden Datenbytes.
Diese muss also 28 Byte kleiner sein als die tatsächliche Paketgröße, um die Größe des Paket-Headers zu berücksichtigen.
Dieser lässt sich recht einfach über Bordmittel des Betriebssystems bestimmen.
siehe MTU

Beispiel

$ ping -s 1500 -c 10 -M do <Hostname>

Problembehebung

Ping 127.

Anhang

Siehe auch

Ping

Sicherheit

Dokumentation

Man-Page

Info-Pages

Links

Weblinks

https://wiki.ubuntuusers.de/ping/

@@ Zeile 1: / Zeile 1: @@
-'''ping''' prüft die Erreichbarkeit eines Netzwerkknotens durch Senden eines ICMP ECHO_REQUEST
+'''ping''' - Prüft die Erreichbarkeit eines Netzwerkknotens durch Senden eines ICMP ECHO_REQUEST
-= Beschreibung =
+== Beschreibung ==
-'''ping''' steht für '''p'''acked '''in'''ternet '''g'''rouper
+'''p'''acked '''in'''ternet '''g'''rouper
+* Prüft die Erreichbarkeit eines Netzwerkknotens durch Senden eines ICMP ECHO_REQUEST
-= Installation =
+'''[[ping]]''' prüft die Verbindung zu einem Zielsystem, indem es einen '''Echo Request''' sendet und einen '''Echo Reply''' erwartet
-''ping'' ist Teil des Pakets ''iputils-ping'', das in jeder Installation enthalten sein sollte.
-  # '''apt install iputils-ping'''
+  $ '''ping google.de'''
-  Paketlisten werden gelesen… Fertig
+  PING google.de(ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003)) 56 data bytes
-  Abhängigkeitsbaum wird aufgebaut… Fertig
+bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=1 ttl=119 time=25.7 ms
-  Statusinformationen werden eingelesen… Fertig
+bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=2 ttl=119 time=22.9 ms
-  iputils-ping ist schon die neueste Version (3:20211215-1).
+bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=3 ttl=119 time=22.6 ms
-aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
+bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=4 ttl=119 time=22.9 ms
+bytes from ham02s17-in-x03.1e100.net (2a00:1450:4005:80b::2003): icmp_seq=5 ttl=119 time=23.1 ms
+ ^C
+ --- google.de ping statistics ---
+packets transmitted, 5 received, 0% packet loss, time 4006ms
+ rtt min/avg/max/mdev = 22.572/23.416/25.650/1.130 ms
+== Installation ==
+* ''ping'' ist Teil des Pakets [[iputils-ping]]
+*  sollte in jeder Installation enthalten sein
-= Syntax =
+== Aufruf ==
   ping [-aAbBdDfhLnOqrRUvV46] [-c count] [-F flowlabel] [-i interval] [-I interface] [-l preload]
   [-m mark] [-M pmtudisc_option] [-N nodeinfo_option] [-w deadline] [-W timeout] [-p pattern]
   [-Q tos] [-s packetsize] [-S sndbuf] [-t ttl] [-T timestamp option] [hop...] {destination}
@@ Zeile 24: / Zeile 33: @@
 Man muss ping entweder händisch stoppen '''(mit Strg + C )''' oder mit der entsprechenden Option die Anzahl der gesendeten Pakete begrenzen.
-Es gibt zwei Varianten des ping-Befehl
+; Es gibt zwei Varianten des ping-Befehl
 * ping - für IPv4-Adressen
 * ping6 - für IPv6-Adressen
@@ Zeile 38: / Zeile 47: @@
   rtt min/avg/max/mdev = 22.685/24.664/28.471/2.692 ms
-== Parameter ==
+=== Optionen ===
+{| class="wikitable sortable options"
-== Optionen ==
-{| class="wikitable sortable"
 |-
 ! Option !! Beschreibung
@@ Zeile 57: / Zeile 64: @@
 | '''-b''' || Allow pinging a broadcast address.
 |-
-| '''-B'''  || Do not allow ping to change source address of probes. The address is bound to one selected when ping starts.
+| '''-B''' || Do not allow ping to change source address of probes. The address is bound to one selected when ping starts.
 |-
-| '''-c''' count  || Stop after sending count ECHO_REQUEST packets. With deadline option, ping waits for count ECHO_REPLY packets, until the timeout expires.
+| '''-c''' count || Stop after sending count ECHO_REQUEST packets. With deadline option, ping waits for count ECHO_REPLY packets, until the timeout expires.
 |-
-| '''-d'''  || Set the SO_DEBUG option on the socket being used. Essentially, this socket option is not used by Linux kernel.
+| '''-d''' || Set the SO_DEBUG option on the socket being used. Essentially, this socket option is not used by Linux kernel.
 |-
 |'''-D''' || Print timestamp (unix time + microseconds as in gettimeofday) before each line.
 |-
-|'''-f'''  || Flood ping. For every ECHO_REQUEST sent a period “.” is printed, while for every ECHO_REPLY received a backspace is printed. This provides a
+|'''-f''' || Flood ping. For every ECHO_REQUEST sent a period “.” is printed, while for every ECHO_REPLY received a backspace is printed. This provides a
 rapid display of how many packets are being dropped. If interval is not given, it sets interval to zero and outputs packets as fast as they
 come back or one hundred times per second, whichever is more. Only the super-user may use this option with zero interval.
@@ Zeile 73: / Zeile 80: @@
 | '''-h''' || Show help.
 |-
-|'''-i''' interval  || Wait interval seconds between sending each packet. Real number allowed with dot as a decimal separator (regardless locale setup). The default
+|'''-i''' interval || Wait interval seconds between sending each packet. Real number allowed with dot as a decimal separator (regardless locale setup). The default
 is to wait for one second between each packet normally, or not to wait in flood mode. Only super-user may set interval to values less than
 .2 seconds.
 |-
-|'''-I''' interface  || interface is either an address, an interface name or a VRF name. If interface is an address, it sets source address to specified interface
+|'''-I''' interface || interface is either an address, an interface name or a VRF name. If interface is an address, it sets source address to specified interface
 address. If interface is an interface name, it sets source interface to specified interface. If interface is a VRF name, each packet is
 routed using the corresponding routing table; in this case, the -I option can be repeated to specify a source address. NOTE: For IPv6, when
@@ Zeile 83: / Zeile 90: @@
 longer required.
 |-
-| '''-l''' preload  || If preload is specified, ping sends that many packets not waiting for reply. Only the super-user may select preload more than 3.
+| '''-l''' preload || If preload is specified, ping sends that many packets not waiting for reply. Only the super-user may select preload more than 3.
 |-
 | '''-L''' || Suppress loopback of multicast packets. This flag only applies if the ping destination is a multicast address.
@@ Zeile 90: / Zeile 97: @@
 specific outbound processing.
 |-
-| '''-M''' pmtudisc_opt  || Select Path MTU Discovery strategy.  pmtudisc_option may be either do (prohibit fragmentation, even local one), want (do PMTU discovery,
+| '''-M''' pmtudisc_opt || Select Path MTU Discovery strategy. pmtudisc_option may be either do (prohibit fragmentation, even local one), want (do PMTU discovery,
 fragment locally when packet size is large), or dont (do not set DF flag).
 |-
-| '''-N'''&nbsp;nodeinfo_option || IPv6 only. Send ICMPv6 Node Information Queries (RFC4620), instead of Echo Request. CAP_NET_RAW capability is required.
+| '''-N''' nodeinfo_option || IPv6 only. Send ICMPv6 Node Information Queries (RFC4620), instead of Echo Request. CAP_NET_RAW capability is required.
 |}
-= Konfiguration =
+=== Parameter ===
-== Dateien ==
+=== Umgebung ===
+=== Paketaufbau ===
+[[File:Ping.png|600px]]
+=== Rückgabewert ===
-= Anwendungen =
+== Anwendung ==
-== -c ANZAHL ==
+{| class="wikitable options"
- $ ping -c 10 foxtom.de
+|-
+! Option !! Beispiel !! Beschreibung
-== -w ENDE ==
+|-
- $ ping -w 15 foxtom.de
+| -c ANZAHL || $ ping -c 10 foxtom.de ||
+|-
-== -W AUSZEIT ==
+| -w ENDE || $ ping -w 15 foxtom.de ||
- $ ping -W 015 foxtom.de </tt>
+|-
+| -W AUSZEIT || $ ping -W 015 foxtom.de ||
-== -i INTERVALL ==
+|-
- $ ping -i 15 foxtom.de
+| -i INTERVALL || $ ping -i 15 foxtom.de ||
+|-
-== -I SCHNITTSTELLE ==
+| -I SCHNITTSTELLE || $ ping -I enp2s0 ($ ip a)foxtom.de ||
- $ ping -I enp2s0 ($ ip a)foxtom.de
+|}
-== Ping und MTU ==
+=== Ping und MTU ===
 * Die im Befehl ping angegebene Größe entspricht der Anzahl der zu sendenden Datenbytes.
 * Diese muss also 28 Byte kleiner sein als die tatsächliche Paketgröße, um die Größe des Paket-Headers zu berücksichtigen.
 * Dieser lässt sich recht einfach über Bordmittel des Betriebssystems bestimmen.
-siehe [[Netzwerke:MTU|MTU]]
+* siehe [[MTU]]
 '''Beispiel'''
   $ ping -s 1500 -c 10 -M do <Hostname>
-= Dokumentation =
+=== Problembehebung ===
-== Man-Pages ==
+; Ping 127.
-== Info-Pages ==
+* https://rixx.de/blog/fun-legacy-ip-addresses/
-= Links =
+* https://bugzilla.mozilla.org/show_bug.cgi?id=160819
-== Intern ==
+* https://www.reddit.com/r/sysadmin/comments/11weum/can_someone_explain_how_this_works_ping_1271/?rdt=50191
+* https://www.quora.com/Is-127-1-a-valid-IP-address
+<noinclude>
+== Anhang ==
+=== Siehe auch ===
+{{Special:PrefixIndex/{{BASEPAGENAME}}}}
+==== Sicherheit ====
+==== Dokumentation ====
+===== Man-Page =====
+===== Info-Pages =====
+==== Links ====
+===== Weblinks =====
+# https://wiki.ubuntuusers.de/ping/
-== Weblinks ==
+[[Kategorie:Linux/Befehl]]
-* https://wiki.ubuntuusers.de/ping/
+[[Kategorie:Linux/Netzwerk]]
-* https://www.tecchannel.de/a/tcp-ip-tuning-fuer-linux,429773,2
+[[Kategorie:Netzwerk/Befehl]]
+[[Kategorie:ICMP]]
-= Testfragen =
+{{DEFAULTSORT:ping}}
-<div class="toccolours mw-collapsible mw-collapsed">
-''Testfrage 1''
-<div class="mw-collapsible-content">'''Antwort1'''</div>
-</div>
-<div class="toccolours mw-collapsible mw-collapsed">
-''Testfrage 2''
-<div class="mw-collapsible-content">'''Antwort2'''</div>
-</div>
-<div class="toccolours mw-collapsible mw-collapsed">
-''Testfrage 3''
-<div class="mw-collapsible-content">'''Antwort3'''</div>
-</div>
-<div class="toccolours mw-collapsible mw-collapsed">
-''Testfrage 4''
-<div class="mw-collapsible-content">'''Antwort4'''</div>
-</div>
-<div class="toccolours mw-collapsible mw-collapsed">
-''Testfrage 5''
-<div class="mw-collapsible-content">'''Antwort5'''</div>
-</div>
-[[Category:Linux:Netzwerke:Befehl]]
+{{DISPLAYTITLE:ping}}
-[[Category:Linux:Befehl]]
+</noinclude>
-[[Category:Linux:Netzwerke]]