Kategorie:T2600G/Security:Access: Unterschied zwischen den Versionen

Aus Foxwiki
Keine Bearbeitungszusammenfassung
K Dirkwagner verschob die Seite Kategorie:T2600G:Security:Access nach Kategorie:T2600G/Security:Access, ohne dabei eine Weiterleitung anzulegen: Textersetzung - „T2600G:“ durch „T2600G/“
 
(32 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
== Access Control ==
[[Kategorie:T2600G/Security]]
You can control the users' access to the switch by filtering IP address, MAC address or port on this page.
 
Configure Access Control
# Enable Access Control globally, then select the control mode.
# Click Add to load the configuration page, select the access interface where to control the users' access, and specify the desired IP address/mask, MAC address or ports based on the control mode.
 
=== Global Config ===
; Access Control
: Enable or disable Access Control.
 
; Control Mode
: Select the control mode for users to log in to the web management page.
 
; IP-based
: Only the users within the IP-range you set here are allowed to access the switch.
 
; MAC-based
: Only the users with the MAC address  you set here are allowed to access the switch.
 
; Port-based
: Only the users connecting to the ports you set here are allowed to access the switch.
 
=== Entry Config ===
; Port/IP/MAC
: Displays the port number/IP address/MAC address of the entry.
 
; Access Interface
: Displays the access interface you set of the entry.
 
; Operation
: Here you can modify or delete the desired entry.
 
== HTTP Config ==
== HTTPS Config ==
== SSH Config ==
== Telnet Config ==
== Serial Port Config ==
 
[[Kategorie:T2600G:Security]]

Aktuelle Version vom 13. Februar 2023, 14:42 Uhr

Diese Kategorie enthält zurzeit keine Seiten oder Medien.