Kategorie:T2600G/Security:Access: Unterschied zwischen den Versionen

Aus Foxwiki
Versionsgeschichte interaktiv durchsuchen
← Zum vorherigen Versionsunterschied
VisuellWikitext
K Dirkwagner verschob die Seite Kategorie:T2600G:Security:Access nach Kategorie:T2600G/Security:Access, ohne dabei eine Weiterleitung anzulegen: Textersetzung - „T2600G:“ durch „T2600G/“
 
(20 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
== Access Control ==
[[Kategorie:T2600G/Security]]
; Control access to the switch by filtering IP address, MAC address or port
 
; Configure Access Control
# Enable Access Control globally, then select the control mode.
# Click Add to load the configuration page, select the access interface where to control the users' access, and specify the desired IP address/mask, MAC address or ports based on the control mode.
 
=== Global Config ===
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Access Control || Enable or disable Access Control.
|-
|  Control Mode || Select the control mode for users to log in to the web management page.
|-
|  IP-based || Only the users within the IP-range you set here are allowed to access the switch.
|-
|  MAC-based || Only the users with the MAC address  you set here are allowed to access the switch.
|-
|  Port-based || Only the users connecting to the ports you set here are allowed to access the switch.
|-
=== Entry Config ===
|  Port/IP/MAC || Displays the port number/IP address/MAC address of the entry.
|-
|  Access Interface || Displays the access interface you set of the entry.
|-
|  Operation || Here you can modify or delete the desired entry.
|}
 
== HTTP Config ==
; Allow or deny users to access the switch via a web browser
 
==== Global Config ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  HTTP || Enable or disable HTTP. When enabled, you can manage the switch through a web browser.
|-
|  Port || Specify the port used for HTTP.
|}
 
==== Session Config ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Session Timeout || Specify the session timeout time. The system will log out automatically if users do nothing within the Session Timeout time.
|}
 
==== Number of Access Users ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Number Control || Enable or disable Number Control. When enabled, you can control the number of the users logging on to the web management page at the same time. The total number of users should be no more than 16.
|-
|  Number of Admins || Specify the maximum number of users whose access level is Admin.
|-
|  Number of Operators || Specify the maximum number of users whose access level is Operator.
|-
|  Number of Power Users || Specify the maximum number of users whose access level is Power User.
|-
|  Number of Users || Specify the maximum number of users whose access level is User.
|}
 
== HTTPS Config ==
SSL (Secure Sockets Layer), a security protocol, provides a secure connection for the application layer protocol (e.g. HTTP) based on TCP.
 
==== Global Config ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  HTTPS || Enable or disable HTTPS. HTTPS is based on the SSL or TLS protocol. It provides a secure connection between the client and the switch.
|-
|  SSL Version 3 || Enable or disable SSL Version 3 protocol on the switch. SSL is a transport protocol. It can provide server authentication, encryption and message integrity to allow secure HTTP connection.
|-
|  TLS Version 1 || Enable or  disable TLS Version 1 protocol on the switch. TLS is a transport protocol upgraded from SSL. It supports a different encryption algorithm from SSL, so TLS and SSL are not compatible. TLS can support a more secure connection.
|-
|  Port || Specify the port using for HTTPS.
|}
 
==== CipherSuite Config ====
{| class="wikitable sortable options"
|-
! Option !! Encryption
|-
| RSA_WITH_RC4_128_MD5 || Key exchange with RC4 128-bit encryption and MD5 for message digest
|-
| RSA_WITH_RC4_128_SHA || Key exchange with RC4 128-bit encryption and SHA for message digest
|-
| RSA_WITH_DES_CBC_SHA || Key exchange with DES-CBC for message encryption and SHA for message digest
|-
| RSA_WITH_3DES_EDE_CBC_SHA || Key exchange with 3DES and DES-EDE3-CBC for message encryption and SHA for message digest
|}
 
==== Session Config ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Session Timeout || The system will log out automatically if users are inactive for a time period equal to the Session Timeout time.
|}
 
==== Number of Access Users ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
| Number Control || Enable or disable Number Control. When enabled, you can control the number of the users logging on to the web management page at the same time. The total number of users should be no more than 16.
|-
| Number of Admins || Specify the maximum number of users whose access level is Admin.
|-
| Number of Operators || Specify the maximum number of users whose access level is Operator.
|-
| Number of Power Users || Specify the maximum number of users whose access level is Power User.
|-
| Number of Users || Specify the maximum number of users whose access level is User.
|}
 
==== Load Certificate ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Certificate File || Select the desired certificate to download to the switch. The certificate must be BASE64 encoded. The SSL certificate and key downloaded must match each other, otherwise the HTTPS connection will not work.
|}
 
==== Load Key ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Key File || Select the desired Key to download to the switch. The key must be BASE64 encoded. The SSL certificate and key downloaded must match each other, otherwise the HTTPS connection will not work.
|}
 
== SSH Config ==
SSH (Security Shell) provides security and powerful authentication to an unsecured remote management to ensure the management information is protected.
 
==== Global Config ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  SSH || Enable or disable SSH. SSH is a protocol working in application layer and transport layer. It can provide a secure, remote connection to a device. It is more secure than Telnet protocol as it provides strong encryption.
|-
|  Protocol V1 || Enable or disable SSH version 1.
|-
|  Protocol V2 || Enable or disable SSH version 2.
|-
|  Idle Timeout || Specify the idle timeout time. The system will automatically release the connection when the time is up.
|-
|  Maximum Connections || Specify the maximum number of the connections to the SSH server. New connection will not be established when the number of the connections reaches the maximum number you set.
|-
|  Port || Specify the port using for SSH.
|}
 
==== Encryption Algorithm ====
Select the encryption algorithm you want the switch to support and click '''Apply'''.
 
==== Data Integrity Algorithm ====
Select the integrity algorithm you want the switch to support and click '''Apply'''.
 
==== Load Key ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Key Type || Select the key type. The algorithm of the corresponding type is used for both key generation and authentication.
|-
|  Key File || Select the desired public key to download to the switch. The key length of the downloaded file ranges of 512 to 3072 bits.
|}
 
== Telnet Config ==
; Configure the telnet login
 
==== Telnet Config ====
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Telnet || Enable or disable Telnet. Telnet is based on the Telnet protocol subjected to TCP/IP protocol. It allows users to log in to the switch remotely.
|-
|  Port || Specify the port used for Telnet.
|}
 
== Serial Port Config ==
; Configure serial port parameters
 
=== Serial Port Settings ===
{| class="wikitable sortable options"
|-
! Option!!Beschreibung
|-
|  Baud Rate || Configure the baud rate of the console connection. The default value is 38400 bps.
|-
|  Data Bits || Displays the data bits.
|-
|  Parity Bits || Displays the parity bits.
|-
|  Stop Bits || Displays the stop bits.
|}
 
[[Kategorie:T2600G:Security]]

Aktuelle Version vom 13. Februar 2023, 14:42 Uhr

Diese Kategorie enthält zurzeit keine Seiten oder Medien.

Abgerufen von „https://wiki.foxtom.de/index.php?title=Kategorie:T2600G/Security:Access&oldid=54362“