T2600G/L3/Proxy ARP: Unterschied zwischen den Versionen
Die Seite wurde neu angelegt: „Kategorie:T2600G:L3:ARP“ |
Keine Bearbeitungszusammenfassung |
||
| (5 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
[[Kategorie:T2600G | Generally, the transmission of ARP packets are restricted in one broadcast domain. If a host sends an ARP request to another host that is not in the same broadcast domain but on the same network segment, the switch will drop the ARP request packet. With proxy ARP enabled, the switch can respond the ARP request with its own MAC address. After that, the ARP request sender sends packets to the switch, and the switch forwards the packets to the intended device. | ||
Proxy ARP Config | |||
You can enable Proxy ARP function on VLAN interface, routed port and port channel. | |||
IP Address/Subnet Mask | |||
Displays the IP Address and subnet mask of the Layer 3 interface. | |||
Interface | |||
Displays the ID of the Layer 3 interface. | |||
Status | |||
Enable or disable Proxy ARP function for the Layer 3 interface. | |||
[[Kategorie:T2600G/L3/ARP]] | |||
Aktuelle Version vom 4. Mai 2023, 09:08 Uhr
Generally, the transmission of ARP packets are restricted in one broadcast domain. If a host sends an ARP request to another host that is not in the same broadcast domain but on the same network segment, the switch will drop the ARP request packet. With proxy ARP enabled, the switch can respond the ARP request with its own MAC address. After that, the ARP request sender sends packets to the switch, and the switch forwards the packets to the intended device. Proxy ARP Config
You can enable Proxy ARP function on VLAN interface, routed port and port channel.
IP Address/Subnet Mask
Displays the IP Address and subnet mask of the Layer 3 interface.
Interface
Displays the ID of the Layer 3 interface.
Status
Enable or disable Proxy ARP function for the Layer 3 interface.