Portsentry: Unterschied zwischen den Versionen

Aus Foxwiki
Subpages:
Versionsgeschichte interaktiv durchsuchen
← Zum vorherigen Versionsunterschied
VisuellWikitext
Keine Bearbeitungszusammenfassung
K Textersetzung - „== Syntax ==“ durch „== Aufruf ==“
 
(42 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
'''topic''' - Kurzbeschreibung
'''Portsentry''' - Daemon zum Erkennen von Portscans


== Beschreibung ==
== Beschreibung ==
== Installation ==
PortSentry kann Port-Scans (einschließlich verdeckter Scans) auf die Netzwerkschnittstellen Ihrer Maschine erkennen. Bei einem Alarm kann er den Angreifer über hosts.deny, entferntem Route-Eintrag oder per Firewall-Regel blockieren. Er ist Teil der Programmsuite Abacus.
== Syntax ==
; Hinweis
=== Optionen ===
: Wenn Sie keine Ahnung haben, was ein (verdeckter) Portscan ist, wird ein Blick auf http://sf.net/projects/sentrytools/ empfohlen, bevor Sie dieses Paket installieren. Andernfalls könnten Sie Rechner blockieren, die Sie besser nicht blockieren sollten (z.B. Ihren NFS-Server, Nameserver, usw.).
=== Parameter ===
=== Umgebungsvariablen ===
=== Exit-Status ===
== Anwendung ==
=== Fehlerbehebung ===
== Konfiguration ==
=== Dateien ===
<noinclude>
== Anhang ==
=== Siehe auch ===
{{Special:PrefixIndex/{{BASEPAGENAME}}}}
==== Sicherheit ====
==== Dokumentation ====
===== RFC =====
===== Man-Pages =====
===== Info-Pages =====
==== Links ====
===== Projekt =====
===== Weblinks =====


= TMP =
; PortSentry blockt standardmäßig nichts
== Daemon zum Erkennen von Portscans ==
* Bitte beachten Sie, dass PortSentry standardmäßig keine Aktionen gegen potenzielle Angreifer durchführt.
PortSentry kann Port-Scans (einschließlich verdeckter Scans) auf die
* Er schreibt nur Informationen nach /var/log/syslog.
* Um dies zu ändern, passen Sie bitte die Datei /etc/portsentry/portsentry.conf entsprechend an.


Netzwerkschnittstellen Ihrer Maschine erkennen. Bei einem Alarm kann
; Beachten Sie folgende Dateien
* /etc/default/portsentry (Daemon Start-Optionen)
* /etc/portsentry/portsentry.ignore.static (zu ignorierende Rechner/Schnittstellen)


er den Angreifer über hosts.deny, entferntem Route-Eintrag oder per
Für weitere Informationen lesen Sie bitte die portsentry(8)- und portsentry.conf(5)-Handbuchseiten.


Firewall-Regel blockieren. Er ist Teil der Programmsuite Abacus.
This manual page documents briefly the portsentry command. This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.


Hinweis: Wenn Sie keine Ahnung haben, was ein (verdeckter) Portscan ist,
portsentry is a program that tries to detect portscans on network interfaces with the ability to detect stealth scans. On alarm portsentry can block the scanning machine via hosts.deny (see hosts_access(5), firewall rule (see ipfwadm(8), ipchains(8) and iptables(8)) or dropped route (see route(8)).


wird ein Blick auf http://sf.net/projects/sentrytools/ empfohlen, bevor
== Installation ==
 
# '''apt install portsentry'''
Sie dieses Paket installieren. Andernfalls könnten Sie Rechner blockieren,
 
die Sie besser nicht blockieren sollten (z.B. Ihren NFS-Server,
 
Nameserver, usw.).
 
PortSentry blockt standardmäßig nichts. │
 
│ │
 
│ Bitte beachten Sie, dass PortSentry standardmäßig keine Aktionen gegen potenzielle Angreifer durchführt. Er │
 
│ schreibt nur Informationen nach /var/log/syslog. Um dies zu ändern, passen Sie bitte die Datei │
 
│ /etc/portsentry/portsentry.conf entsprechend an. │
 
│ │
 
│ Bitte beachten Sie auch folgende Dateien: │
 
│ /etc/default/portsentry (Daemon Start-Optionen) und │
 
│ /etc/portsentry/portsentry.ignore.static (zu ignorierende Rechner/Schnittstellen) │
 
│ │
 
│ │
 
│ Für weitere Informationen lesen Sie bitte die portsentry(8)- und portsentry.conf(5)-Handbuchseiten.


=== Files ===
=== Files ===
/etc/default
/etc/default
/etc/init.d/portsentry
/etc/portsentry/portsentry.conf
/etc/portsentry/portsentry.ignore.static
/etc/ppp/ip-down.d
/etc/ppp/ip-down.d/portsentry
/etc/ppp/ip-up.d
/etc/ppp/ip-up.d/portsentry
/usr/lib/portsentry/portsentry-add-ip
/usr/lib/portsentry/portsentry-build-ignore-file
/usr/lib/portsentry/portsentry-rm-ip
/usr/sbin/portsentry
/usr/share/doc/portsentry
/usr/share/doc/portsentry/CREDITS.gz
/usr/share/doc/portsentry/README.COMPAT
/usr/share/doc/portsentry/README.Debian
/usr/share/doc/portsentry/README.install.gz
/usr/share/doc/portsentry/README.methods.gz
/usr/share/doc/portsentry/README.stealth.gz
/usr/share/doc/portsentry/TODO.Debian
/usr/share/doc/portsentry/changelog.Debian.amd64.gz
/usr/share/doc/portsentry/changelog.Debian.gz
/usr/share/doc/portsentry/changelog.gz
/usr/share/doc/portsentry/copyright
/usr/share/doc/portsentry/examples/ignore.csh
/usr/share/doc/portsentry/examples/kill_cmd
/usr/share/doc/portsentry/examples/scan-detect
/usr/share/man/man5/portsentry.conf.5.gz
/usr/share/man/man8/portsentry.8.gz
/var
/var/lib
/var/lib/portsentry


/etc/init.d
== Aufruf ==
portsentry [ -tcp | -stcp | -atcp ]
portsentry [ -udp | -sudp | -audp ]


/etc/init.d/portsentry
=== Optionen ===
{| class="wikitable sortable options"
|-
! Option !! Beschreibung
|-
| -tcp || tcp portscan detection on ports specified under TCP_PORTS in the config file /etc/portsentry/portsentry.conf.
|-
| -stcp || As above but additionally detect stealth scans.
|-
| -atcp || Advanced tcp or inverse mode. Portsentry binds to all unused ports below ADVANCED_PORTS_TCP given in the config file /etc/portsentry/portsentry.conf.
|-
| -udp || udp portscan detection on ports specified under UDP_PORTS in the config file /etc/portsentry/portsentry.conf.
|-
| -sudp || As above but additionally detect "stealth" scans.
|-
| -audp || Advanced udp or inverse mode. Portsentry binds to all unused ports below ADVANCED_PORTS_UDP given in the config file /etc/portsentry/portsentry.conf.
|}
For details on the various modes see /usr/share/doc/portsentry/README.install


/etc/portsentry
=== Parameter ===
=== Umgebung ===
=== Rückgabewert ===


/etc/portsentry/portsentry.conf
== Anwendung ==
=== Dienstverwaltung ===
# systemctl status portsentry.service
● portsentry.service - LSB: # start and stop portsentry
      Loaded: loaded (/etc/init.d/portsentry; generated)
      Active: active (running) since Fri 2023-06-30 10:58:34 CEST; 1h 45min ago
        Docs: man:systemd-sysv-generator(8)
    Process: 14255 ExecStart=/etc/init.d/portsentry start (code=exited, status=0/SUCCESS)
      Tasks: 2 (limit: 76987)
      Memory: 1.1M
        CPU: 71ms
      CGroup: /system.slice/portsentry.service
              ├─14266 /usr/sbin/portsentry -tcp
              └─14270 /usr/sbin/portsentry -udp
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 34555
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 31335
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32770
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32771
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32772
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32773
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32774
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 31337
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 54321
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: PortSentry is now active and listening.


/etc/portsentry/portsentry.ignore.static


/etc/ppp
=== Problembehebung ===


/etc/ppp/ip-down.d
== Konfiguration ==
portsentry keeps all its configuration files in /etc/portsentry. portsentry.conf is portsentry's main configuration file. See portsentry.conf(5) for details.


/etc/ppp/ip-down.d/portsentry
The file portsentry.ignore contains a list of all hosts that are ignored, if they connect to a tripwired port. It should contain at least the localhost(127.0.0.1), 0.0.0.0 and the IP addresses of all local interfaces. You can ignore whole subnets by using a notation <IP Address>/<Netmask Bits>. It is *not* recommend putting in every machine IP on your network. It may be important for you to see who is connecting to you, even if it is a "friendly" machine. This can help you detect internal host compromises faster.


/etc/ppp/ip-up.d
If you use the /etc/init.d/portsentry script to start the daemon, portsentry.ignore is rebuild on each start of the daemon using portsentry.ignore.static and all the IP addresses found on the machine via ifconfig.


/etc/ppp/ip-up.d/portsentry
/etc/default/portsentry specifies in which protocol modes portsentry should be startet from /etc/init.d/portsentry There are currently two options:
TCP_MODE= either tcp, stcp or atcp (see OPTIONS above).
UDP_MODE= either udp, sudp or audp (see OPTIONS above).


/usr
The options above correspond to portsentry's commandline arguments. For example TCP_MODE="atcp"  has the same effect as to start portsentry using portsentry -atcp. Only one mode per protocol can be started at a time (i.e. one tcp and one udp mode).


/usr/lib
</noinclude>


/usr/lib/portsentry
=== Dateien ===
{| class="wikitable sortable options"
|-
! Option !! Beschreibung
|-
| /etc/portsentry/portsentry.conf || main configuration file
|-
| /etc/portsentry/portsentry.ignore || IP addresses to ignore
|-
| /etc/portsentry/portsentry.ignore.static || static IP addresses to ignore
|-
| /etc/default/portsentry || startup options
|-
| /etc/init.d/portsentry || script responsible for starting and stopping the daemon
|-
| /var/lib/portsentry/portsentry.blocked.* || blocked hosts(cleared upon reload)
|-
| /var/lib/portsentry/portsentry.history || history file
|}
<noinclude>


/usr/lib/portsentry/portsentry-add-ip
== Anhang ==
=== Siehe auch ===
{{Special:PrefixIndex/{{BASEPAGENAME}}}}
==== Dokumentation ====
# /usr/share/doc/portsentry/README.install
===== RFC =====
===== Man-Page =====
# portsentry.conf(5)
# hosts_access(5)
# hosts_options(5)
# route(8)
# ipfwadm(8)
# ipchains(8)
# iptables(8)
# ifconfig(8)


/usr/lib/portsentry/portsentry-build-ignore-file
===== Info-Pages =====


/usr/lib/portsentry/portsentry-rm-ip
==== Links ====
 
===== Projekt =====
/usr/sbin
===== Weblinks =====
 
# https://www.computersecuritystudent.com/UNIX/UBUNTU/1204/lesson14/index.html
/usr/sbin/portsentry
# https://etutorials.org/Linux+systems/red+hat+linux+bible+fedora+enterprise+edition/Part+III+Administering+Red+Hat+Linux/Chapter+14+Computer+Security+Issues/Guarding+Your+Computer+with+PortSentry/
 
# https://www.digitalocean.com/community/tutorials/how-to-set-up-a-firewall-with-ufw-on-ubuntu-20-04-de
/usr/share
 
/usr/share/doc
 
/usr/share/doc/portsentry
 
/usr/share/doc/portsentry/CREDITS.gz
 
/usr/share/doc/portsentry/README.COMPAT
 
/usr/share/doc/portsentry/README.Debian
 
/usr/share/doc/portsentry/README.install.gz
 
/usr/share/doc/portsentry/README.methods.gz
 
/usr/share/doc/portsentry/README.stealth.gz
 
/usr/share/doc/portsentry/TODO.Debian
 
/usr/share/doc/portsentry/changelog.Debian.amd64.gz
 
/usr/share/doc/portsentry/changelog.Debian.gz
 
/usr/share/doc/portsentry/changelog.gz
 
/usr/share/doc/portsentry/copyright
 
/usr/share/doc/portsentry/examples
 
/usr/share/doc/portsentry/examples/ignore.csh
 
/usr/share/doc/portsentry/examples/kill_cmd
 
/usr/share/doc/portsentry/examples/scan-detect
 
/usr/share/man
 
/usr/share/man/man5
 
/usr/share/man/man5/portsentry.conf.5.gz
 
/usr/share/man/man8
 
/usr/share/man/man8/portsentry.8.gz
 
/var
 
/var/lib
 
/var/lib/portsentry
 
== Portsentry ==
Wer Ports auf fremden Rechnern abtastet, gilt nach vorherrschender Meinung nicht als Angreifer. Allerdings geht einer ernst gemeinten Attacke fast immer ein Portscan voraus. Mütter der Porzellankiste reagieren auf Portscans deshalb vorsorglich (“proaktiv” auf Consultingdeutsch), indem sie von der IP-Adresse, die den Portscan ausgeführt hat, für eine Zeit lang keine weiteren Verbindungen annehmen. Das dazu passende Werkzeug heißt Portsentry http://1 und gehört zum Umfang der meisten Distributionen. Der Daemon erkennt und loggt Portscans und führt daraufhin Kommandos aus.
 
In der Datei »/etc/default/portsentry« stelle ich den Erkennungsmodus ein:
 
TCP_MODE="tcp"
UDP_MODE="udp"
 
Wenn ich nicht will, dass Portsentry UDP-Ports überwacht, lösche ich die zweite Zeile. Ersetze ich »tcp« und »udp« durch »stcp« und »sudp« , reagiert das Tool sensibler und erkennt auch Stealth-Scans. Gebe ich »atcp« und »audp« an, bindet es alle unbenutzten Ports unterhalb von 1024 und meldet sie dem Angreifer als offen, woraufhin der Verdutzte genau so schlau ist wie vor seinem Scan.
 
Weiteren Raum fürs Setup öffnet »/etc/portsentry/portsentry.conf« . Hier darf ich Triggerports definieren, die als Portscan-Detektoren dienen. Die vorgegebene Auswahl ist recht gut, ich würde sie nur ändern, wenn ich auf einem dieser Ports einen Daemon betriebe.
 
Wichtiger ist es, die Sensibilität mit der Variablen »SCAN_TRIGGER« festzulegen. Beim Default »0« reagiert Portsentry sofort, wenn ein Triggerport anspricht. Werte wie »1« oder »2« reduzieren die Empfindlichkeit und damit die falsch-positiven Alarme. Dem gleichen Ziel dient »ADVANCED_EXCLUDE_TCP=« : Ports, die oft von fremden Hosts angesprochen werden wie Ident (Port 113) und Netbios (Port 139), klammert der »atcp« -Modus explizit aus, ebenso wie -»ADVANCED_EXCLUDE_UDP-« die UDP-Ports 67, 137, 138 und 520 (DHCP, Netbios, RIP).
 
Per Default reagiert Portsentry nicht auf Scans, sondern schreibt nur einen Log-Eintrag. Dieses Verhalten steuern:
 
BLOCK_UDP="0"
BLOCK_TCP="0"
 
Eine »1« an dieser Stelle bewirkt, dass IP-Adressen, von denen Portscans ausgehen, sich nicht mehr verbinden können, weil Portsentry das Kommando
 
/sbin/route add -host $TARGET$ reject
 
ausführt, das alle Anfragen mit Connection Refused abbügelt (Abbildung 1). Die IP-Adresse, von der der Portscan ausging, landet außerdem in der Datei »/var/lib/portsentry/portsentry.blocked« und bleibt dort bis zum Neustart des Daemon.
 
[[Image:Bild2.png|top|alt="Abbildung 1: Portsentry initialisiert sich und detektiert Portscans entsprechend seiner Konfiguration."]]
 
Abbildung 1: Portsentry initialisiert sich und detektiert Portscans entsprechend seiner Konfiguration.
 
=== Waffe gesichert ===
Um zu verhindern, dass eigene Systeme in Portsentrys Fänge geraten, gibt es die Datei »/etc/portsentry/portsentry.ignore.static« . Hier kann ich einzelne Hosts oder ganze Netze definieren, die von allen Gegenmaßnahmen verschont bleiben. Apropos: Wenn ich »BLOCK_TCP« und »BLOCK_UDP« auf »2« stelle, führt Portsentry jeden Befehl aus, den ich in »KILL _RUN_CMD« hinterlege – das Alarmieren per SMS oder Ähnliches, es bedient aber auch die Großkaliberwaffe Metasploit für brutale Gegenschläge. Bedenke: Es wirkt ungehobelt, jedem die Doppelläufige in die Nasenlöcher zu schieben, der zaghaft an die Tür klopft.
 
Infos# Portsentry: http://sourceforge.net/projects/sentrytools/
 
<nowiki># https://www.linux-magazin.de/ausgaben/2012/02/einfuehrung2/</nowiki>
 
== Portsentry ==
Ihre Server evtl. unterschiedliche Portscans zu identifizieren, z. B. Dienste, die auf vorhanden sind Ihre Server oder sogar das Betriebssystem installiert (Das ermöglicht beispielsweise Nmap, ). Diese Informationen könnten dann ausgenutzt werden, wenn eine böswillige Person, die Integrität der erreichen Ihre Server.
 
Zum Schutz gegen diese Praktiken können Sie Portsentry implementieren, die die IP-Adressen der Verbindungen am Ursprung der diese Scans blockiert wird.
 
Portsentry kann eine Ergänzung zum Scheitern verurteilt sein 2verbieten wollen Sie die Sicherheit verbessern Ihre Server. In der Tat fehl 2verbieten, Blockieren von IP-Adressen der Verbindungen, die erfolglose während Portsentry Authentifizierung, er führt eine Sperrung von IP-Adressen, die darauf abgezielt werden, offene Ports zu identifizieren Ihre Server. Beide Pakete können ergänzt werden und somit zur Erhöhung der Sicherheits Ihrer Server.
 
Wir beginnen, indem Sie die Installation des Pakets die uns, mit dem folgenden Befehl betrifft&nbsp;:
 
root@flex:~# apt-get update && apt-get install portsentry
 
Eine Warnmeldung wird Ihnen sagen, dass Portsentry gelten keine Blockierung, wenn Sie, es sagen zu tun : [[Image:Bild3.png|top|alt="Portsentry.png"]]
 
Sobald die Installation abgeschlossen ist, werden wir daher mit Portsentry Konfiguration fortfahren.
 
In einem ersten Schritt beenden wir Dienst :
 
root@flex:~# /etc/init.d/portsentry stop
Stopping anti portscan daemon: portsentry.
 
Wir setzen dann die Ausnahmen nicht zu verschiedenen IP-Adressen blockieren (zumindest Ihre IP-Adresse sowie die IP-Adressen der Servers der Überwachung usw..).
 
Für die Strände von IP-Adressen ermöglichen und von unserem Server Überwachung, entnehmen Sie bitte den folgenden Artikel : https://fr.ikoula.wiki/fr/Quelles_sont_les_IP_%C3%A0_autoriser_dans_mon_firewall_pour_qu%27Ikoula_ait_acc%C3%A8s_%C3%A0_mon_Server
 
Um diese Ausnahmen zu implementieren, bearbeiten wir die Datei ''/etc/portsentry/portsentry.ignore.static''
 
Zu Beginn des Dienstes, werden der Inhalt der Datei in die Datei hinzugefügt ''/etc/portsentry/portsentry.ignore''.
 
Portsentry eine Ausnahme hinzu, fügen Sie einfach eine IP-Adresse pro Zeile. Sie können auch und gerade einen hinzufügen oder ein CIDR.
 
Nun, da Sie hinzugefügt haben Ihre /Ihre IP-Adressen in der Liste Weiße, wir konfiguriere Portsentry, richtig gesprochen durch Bearbeiten der Konfigurationsdatei das über ''/etc/portsentry/portsentry.conf''.
 
Wir benutzen Portsentry im erweiterten Modus für die Protokolle TCP und UDP. Hierzu müssen Sie die Datei ändern ''/etc/default/portsentry'' um :
 
TCP_MODE="atcp"
UDP_MODE="audp"
 
Wir möchten auch, dass diese Portsentry eine Blockade ist. Deshalb müssen wir es aktivieren, indem Sie BLOCK_UDP und BLOCK_TCP zu übergeben 1 wie unten beschrieben :
 
<nowiki>##################</nowiki>
<nowiki># Ignore Options #</nowiki>
<nowiki>##################</nowiki>
<nowiki># 0 = Do not block UDP/TCP scans.</nowiki>
<nowiki># 1 = Block UDP/TCP scans.</nowiki>
<nowiki># 2 = Run external command only (KILL_RUN_CMD)</nowiki>
 
BLOCK_UDP="1"
BLOCK_TCP="1"
 
Wir entscheiden Sie sich für eine Sperrung von böswilligen Personen über Iptables. Wir werden daher auf allen Linien der Konfigurationsdatei, die mit KILL_ROUTE, mit Ausnahme der nächsten beginnen Kommentar :
 
KILL_ROUTE="/sbin/iptables -I INPUT -s $TARGET$ -j DROP"
 
Sie können überprüfen, ob dies der Fall, sobald die gespeicherte Datei mit Katze und Grep ist :
 
cat portsentry.conf | grep KILL_ROUTE | grep -v "#"
 
Wir können jetzt starten Dienst Portsentry und es beginnt nun die Portscans blockieren :
 
root@flex:~# /etc/init.d/portsentry start
Starting anti portscan daemon: portsentry in atcp & audp mode.
 
Portsentry protokolliert in der Datei /var/log/syslog und wie Sie unten sehen können, einen Anschluss für die Betreuung des Lernprogramms mit Nmap hergestellt nach, Scan die Adresse wurde blockiert, durch Iptables :
 
Mar 17 16:59:02 sd-24527 portsentry[6557]: adminalert: PortSentry is now active and listening.
Mar 17 17:00:29 sd-24527 portsentry[6553]: attackalert: Connect from host: 178.170.xxx.xxx/178.170.xxx.xxx to TCP port: 1
Mar 17 17:00:29 sd-24527 portsentry[6553]: attackalert: Host 178.170.xxx.xxx has been blocked via wrappers with string: "ALL: 178.170.xxx.xxx&nbsp;: DENY"
Mar 17 17:00:29 sd-24527 portsentry[6553]: attackalert: Host 178.170.xxx.xxx has been blocked via dropped route using command: "/sbin/iptables -I INPUT -s 178.170.xxx.xxx -j DROP"
Mar 17 17:00:29 sd-24527 portsentry[6553]: attackalert: Connect from host: 178.170.xxx.xxx/178.170.xxx.xxx to TCP port: 79
Mar 17 17:00:29 sd-24527 portsentry[6553]: attackalert: Host: 178.170.xxx.xxx is already blocked. Ignoring
[...]
 
Wenn Sie einen Block werfen möchten, können Sie überprüfen die IP Adressen über Iptables verboten. Gibt es die IP, die blockiert wurde nach unserem vorherigen Test :
 
root@flex:~# iptables -L -n -v
Chain INPUT (policy ACCEPT 52381 packets, 6428K bytes)
pkts bytes target prot opt in out source destination
794 42696 DROP all -- <nowiki>* </nowiki> <nowiki>* </nowiki> 178.170.xxx.xxx 0.0.0.0/0
 
Also lasst uns den Eintrag löschen :
 
iptables -D INPUT -s 178.170.xxx.xxx -j DROP
 
PS&nbsp;: vergessen Sie nicht, die IP-Adressen erlauben unsere Servers der Überwachung in den Ausnahmen von Portsentry vermeiden Fehlalarme und verursachen unnötige Warnungen.
 
https://de-wiki.ikoula.com/de/Zum_Schutz_vor_der_Untersuchung_der_Ports_mit_portsentry
 
== Mit Portsentry Portscans vermeiden ==
Mit PortSentry könnt Ihr ausgewählte Ports auf Port Scans überwachen und die Port Scan Quelle blockieren. Damit kriegen Angreifer sofort die Türen zu gemacht und werden schon vorm Versuch in den Server einzudringen ausgesperrt. Allesdings muss dafür ein Port offen gelassen werden, hier müsst Ihr selber entscheiden was Euch lieber ist, Ports schließen oder offen lassen…
 
In diesem Beispiel werden die Ports 22 und 23 offen gelassen und sobald darauf ein Scan statt findet, wird diese IP für min. 30 Minuten gesperrt. Dafür wird ein Script und die Beschreibung von Rob-Schulze.de verwendet. Vielen Dank an dieser Stelle für das Script und Tutorial!!!
 
Die Installation wird mit apt-get durchgeführt:
 
apt-get install portsentry
 
Die Konfigurationsdatei liegt im Pfad /etc/portsentry/portsentry.conf. Hier müssen diverse Einstellungen getätigt werden, zunächst empfehle ich zu prüfen, ob in der Datei alle Einträge die mit
 
KILL_ROUTE==
beginnen auskommentiert sind. Wenn nicht, dann müssen diese Einträge auskommentiert werden.
 
Selbiges gilt für die folgenden Einträge:
 
TCP_PORTS==
UDP_PORTS==
Anstatt dessen werden nun folgende Werte in die Datei eingetragen:
 
TCP_PORTS=“22,23″
 
UDP_PORTS=“22,23″
 
KILL_RUN_CMD=“/etc/portsentry/filtermgr -a $TARGET$“
 
TCP_PORTS und UDP_PORTS definieren die Ports, die geprüft werden sollen. Hier können auch weitere Ports durch ein „,“ getrennt eingetragen werden. Die Firewall darf natürlich nicht diesen Port blocken. Wenn auf Port 22 gelauscht werden soll, dann ist es wichtig, dass vorher der SSH-Port umgelegt wurde, da man sich ansonsten im schlimmsten Fall aussperren kann.
 
Die folgenden Werte werden von der Default-Einstellung „0“ auf „2“ geändert, damit ein das externe Script von Rob Schulze überhaupt aufgerufen werden kann:
 
BLOCK_UDP="2"
 
BLOCK_TCP="2"
 
Jetzt wird das Script von Rob Schulze benötigt:
 
cd /etc/portsentry
 
wget http://www.rob-schulze.de/informatik/tutorials/portsentry/rcportsentry
 
chmod 700 rcportsentry
 
Dieses Script muss editiert werden, u.a. muss hier der Pfad zur iptables und zum Pfad von der PortSentry-Konfiguration angegeben werden:
 
my $BASE_DIR=“/etc/portsentry“;
 
my $BLOCK_FILE=“/var/lib/portsentry/portsentry.blocked“;
 
my $IPTABLES_CMD=“/sbin/iptables“;
 
my $BLOCK_TIMEOUT=60*30;
 
Der Wert BLOCK_TIMEOUT gibt die Sperrzeit in Sekunden an. Hier kann auch gerechnet werden, also 60*30 wären somit 1800 Sekunden oder 30 Minuten.
 
Damit die gesperrten IP-Adressen auch wieder freigegeben werden ist es notwendig, dass per Crontab das Script von Rob Schulze die iptables-Regeln wieder entfernt. Ich rufe das Script alle 30 Minuten auf, somit ist eine IP-Adresse im schlimmsten Fall 60 Minuten oder im schnellsten Fall nur 30 Minuten gesperrt. Hier der Crontab-Eintrag:
 
<nowiki>*/30 * * * * /etc/portsentry/filtermgr -d</nowiki>
 
Ich nutze ein Firewall-Script zum starten der „Sicherheits“programme auf dem vServer. Portsentry wird automatisch beim Systemstart geladen, allerdings soll Portsentry im Firewall-Script integriert werden, deshalb wird der automatische Start wie folgt aufgehoben:
 
update-rc.d -f portsentry remove
 
Das Firewall-Script inkl. der Einträge für PortSentry sieht dann so aus (die neuen Einträge sind durch #### vorher gekennzeichnet, damit Ihr diese leichter erkennt):
 
<nowiki>#!/bin/sh</nowiki>
 
<nowiki># script written by Gargi 2009 http://www.gargi.org</nowiki>
 
<nowiki>#needed modules</nowiki>
 
modprobe ip_conntrack_ftp
 
BLACKLIST=/usr/local/etc/blacklist.txt
 
<nowiki>#trigger for your ports</nowiki>
 
IN_ALLOWED_TCP=“21 22 23 25 53 80″
 
OUT_ALLOWED_TCP=“21 22 23 25 53 80″
 
IN_ALLOWED_UDP=“53 7878″
 
OUT_ALLOWED_UDP=“53″
 
IN_ALLOWED_ICMP=“ “
 
OUT_ALLOWED_IMCP=“ “
 
case „$1“ in
 
start)
 
<nowiki>##### Stopping PortSentry</nowiki>
 
/etc/init.d/portsentry stop
 
<nowiki># Stopping IP trap</nowiki>
 
/etc/init.d/fail2ban stop
 
echo „Stopping fail2ban IP trap …“
 
<nowiki># Clear iptables</nowiki>
 
iptables -F
 
<nowiki>#Defaults</nowiki>
 
iptables -P INPUT DROP
 
iptables -P OUTPUT DROP
 
iptables -P FORWARD DROP
 
<nowiki># loopback communication</nowiki>
 
iptables -A INPUT -i lo -j ACCEPT
 
iptables -A OUTPUT -o lo -j ACCEPT
 
<nowiki># persist on connections</nowiki>
 
iptables -A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT
 
iptables -A OUTPUT -m state –state ESTABLISHED,RELATED -j ACCEPT
 
<nowiki># Ban blacklisted IPs</nowiki>
 
for x in `grep -v ^# $BLACKLIST | awk ‚{print $1}’`; do
 
echo „Blocking $x…“
 
iptables -A INPUT -t filter -s $x -j DROP
 
done
 
<nowiki># TCP rules in</nowiki>
 
for port in $IN_ALLOWED_TCP; do
 
echo „Accepting TCP port $port“
 
iptables -A INPUT -t filter -p tcp –dport $port -j ACCEPT
 
done
 
<nowiki># TCP rules out</nowiki>
 
for port in $OUT_ALLOWED_TCP; do
 
echo „Allowing sending over TCP port $port“
 
iptables -A OUTPUT -t filter -p tcp –dport $port -j ACCEPT
 
done
 
<nowiki># UDP rules in</nowiki>
 
for port in $IN_ALLOWED_UDP; do
 
echo „Accepting UDP port $port“
 
iptables -A INPUT -t filter -p udp –dport $port -j ACCEPT
 
done
 
<nowiki># UDP rules out</nowiki>
 
for port in $OUT_ALLOWED_UDP; do
 
echo „Allowing sending over UDP port $port“
 
iptables -A OUTPUT -t filter -p udp –dport $port -j ACCEPT
 
done
 
<nowiki># ICMP rules in</nowiki>
 
for port in $IN_ALLOWED_ICMP; do
 
echo „Accepting ICMP port $port“
 
iptables -A INPUT -t filter -p icmp –dport $port -j ACCEPT
 
done


<nowiki># ICMP rules out</nowiki>
[[Kategorie:IT-Sicherheit/Tools]]
 
for port in $OUT_ALLOWED_ICMP; do
 
echo „Allowing sending over ICMP port $port“
 
iptables -A OUTPUT -t filter -p icmp –dport $port -j ACCEPT
 
done
 
<nowiki># Dropping startup requests</nowiki>
 
iptables -A INPUT -t filter -p tcp –syn -j DROP
 
<nowiki># Restarting IP trap</nowiki>
 
/etc/init.d/fail2ban start
 
echo „Fire up IP trap again …“
 
<nowiki>##### Restating PortSentry</nowiki>
 
/etc/init.d/portsentry start
 
ps -ef | grep „portsentry -tcp“ | grep -v grep | awk ‚{print $2}‘ > /var/run/portsentry-tcp.pid
 
ps -ef | grep „portsentry -udp“ | grep -v grep | awk ‚{print $2}‘ > /var/run/portsentry-udp.pid
 
<nowiki>;;</nowiki>
 
stop)
 
/etc/init.d/portsentry stop
 
/etc/init.d/fail2ban stop
 
iptables -F
 
iptables -P INPUT ACCEPT
 
iptables -P OUTPUT ACCEPT
 
echo „Warning! Firewall is stopped, server is unprotected now!“
 
<nowiki>;;</nowiki>
 
restart)
 
$0 stop
 
sleep 1
 
$0 start
 
<nowiki>;;</nowiki>
 
<nowiki>*)</nowiki>
 
echo „Usage $0 {start|stop|restart}“
 
<nowiki>;;</nowiki>
 
esac
 
<nowiki># </nowiki>https://splittscheid.de/mit-portsentry-portscans-vermeiden/
 
== Mehr Sicherheit durch portsentry ==
Die meisten Angriffe auf Systeme beginnen mit einem portscan, das hier erklärte Tool <tt>portsentry</tt> erkennt diese und leitet Gegenmaßnahmen ein. Man kann dem Angreifer blocken oder aber ihm einfach sagen, um ihn zu verwirren, dass alle Ports offen sind. Das Tool kann auch Gegenangriffe ausführen, was aber nicht wirklich zu empfehlen ist, da es ja auch ungefährliche Portscans gibt.
 
=== Installation ===
unter Debian / Ubuntu einfach:
 
aptitude install portsentry
 
Standardmäßig loggt <tt>portsentry</tt> nur, erst nach editieren der Konfigurationsdatei <tt>/etc/portsentry/portsentry.conf</tt> führt es auch Aktionen aus.
 
=== Konfiguration ===
<tt>/etc/default/portsentry</tt>
 
<nowiki># /etc/default/portsentry</nowiki>
<nowiki>#</nowiki>
<nowiki># This file is read by /etc/init.d/portsentry. See the portsentry.8</nowiki>
<nowiki># manpage for details.</nowiki>
<nowiki>#</nowiki>
<nowiki># The options in this file refer to commandline arguments (all in lowercase)</nowiki>
<nowiki># of portsentry. Use only one tcp and udp mode at a time.</nowiki>
<nowiki>#</nowiki>
TCP_MODE="stcp"
UDP_MODE="sudp"
 
Die Beiden Schalter <tt>stcp</tt> und <tt>sudp</tt> sorgen dafür das auch Stealth Scans erkannt werden. Bei der Konfiguration ist zu beachten, das falls eine Firewall eingesetzt wird, ein Port aufgemacht werden muss auf dem dann der Portscanner läuft. Zum Beispiel kann man den SSH Port umlegen und den Port 22 per portsentry überwachen. Portsentry kann nicht auf einem bereits vorhandenen Port lauschen! <tt>/etc/portsentry/portsentry.conf</tt>
 
TCP_PORTS="22"
Block_TCP="1"
Block_UDP="1"
KILL_ROUTE="/sbin/route add -host $TARGET$ reject"
SCAN_TRIGGER="1"
 
=== Quellen ===
* http://www.splitt-it.de/mit-portsentry-port-scans-den-garaus-machen/
 
=== Portsentry ===
Portsentry7 ist Teil des Abacus-Projektes, einer Sammlung von Security-Tools. Alle Programme des Abacus-Projektes zeichnen sich durch einfache Konfiguration aus und sind wartungsfrei zu betreiben.8
 
Portsentry überwacht die TCP/UDP-Ports eines Systems. Es erkennt Portscans, die gegen das System gerichtet sind. Dabei spürt es mit verschiedenen Betriebsarten (Classic Mode, Enhanced Stealth Mode, Advanced Stealth Mode) unterschiedliche Arten von Stealth-Scans, wie z.B. SYN/half-open, FIN, NULL und X-MAS auf. Portsentry arbeitet sehr ressourcensparend. Es muß nur einmal gestartet werden und überwacht beliebig viele Ports. Alle Angriffsversuche werden in den Systemlogdateien mitprotokolliert.
 
Portsentry antwortet auf versuchte Portscans, indem es den angreifenden Computer blockt:* Die lokale Route der Pakete kann zurück zum Angreifer gesetzt werden
* Der angreifende Computer wird in die Datei hosts.deny eingetragen
* Es wird eine Regel in das Firewallskript eingefügt
 
Die meisten Angriffe werden so im Keim erstickt.
 
Portsentry sollte in eine der Startdateien (z.B. '''/etc/rc.d/rc.local''') eingetragen werden, um nach dem Booten automatisch seinen Dienst zu verrichten.
 
Portsentry-Konfiguration:
 
Portsentry wird über die Datei '''/usr/local/psionic/portsentry/portsentry.conf''' konfiguriert.
 
Einige wichtige Abschnitte der Konfigurationsdatei:* Port Configurations
 
Hier werden die Ports angegeben, die überwacht werden sollen. Standardmäßig stehen drei Portbereiche zur Auswahl bereit.* Advanced Stealth Scan Detection Options
 
Hier werden die Ports für den erweiterten Modus angegeben. Standardmäßig werden alle privilegierten Ports überwacht.* Configuration Files
 
Lage der Dateien, die die geblockten Rechner enthalten.* Response Options
 
In diesem Abschnitt wird bestimmt, was bei einem entdeckten Portscan geschehen soll. Eine der folgenden Optionen kann genutzt werden:* Ignore Options
 
* Den Portscan nicht blocken (Do not block UDP/TCP scans)
* Den Portscan blocken (Block UDP/TCP scans)
* Ein externes Kommando starten (Run external command only)
 
* Dropping Routes
 
Hier lassen sich die Pakete des Angreifers durch eine Firewallregel blocken
 
KILL_ROUTE="/sbin/ipchains -I input -s $TARGET$ -j DENY -l"* Scan trigger value
 
Hier läßt sich die Anzahl von Verbindungen bestimmen, bevor ein Alarm ausgelöst wird. Als Standard ist 0 angegeben, dies bewirkt einen Alarm beim ersten Verbindungsversuch. Eine größere Zahl sollte die Anzahl der falschen Alarme vermindern.
 
<nowiki># </nowiki>https://www.pro-linux.de/artikel/2/1021/5,portsentry.html?cop=300
 
== Portsentry to block port scans ==
Debian11 Server GNU Linux Linux Debian Debian 10 Debian 11 Buster Bullseye Server Installation Portsentry Fail2ban Security IPTables TCPWrappers
 
Installing and configuring Portsentry as a second line of defense against port scanning, after IPTables lscan and psd rules. It will ban attacker’s machines temporarily of definitely, but will whitelist my own network and IP addresses.
 
=== Portsentry presentation ===
Portsentry listen to most unused network ports. It receives all the incoming connections and can detect sequences of connections from a source to detect a network port scan. Then, it can react with arbitrary commands, to block the scans, to return garbage, to trigger countermeasures… Most scans will be detected and blocked by the IPTables chain, PortSentry is configured as a second line of defense. It will use TCPWrappers and IPTables to block the scans on UDP and TCP. It will also be configured to ignore my own IP addresses.
 
=== Prerequisites ===
This article only depends on the Generic machine preparation post serie.
 
==== Existing variables ====
We need the <tt>LAN_*</tt> variable which was already defined in the configuration file, the Configuration variables post.
 
==== Reload the variables ====
Ensure that the variables are available, by loading the configuration script :
 
source /root/config.env
 
=== Common installation ===
I first pre-configure the answer to a question that would otherwise be asked by the package and I install it.
 
echo portsentry portsentry/warn_no_block string "" | debconf-set-selections
apt-get install -y portsentry
 
==== Automatic bind to unused ports ====
Configure <tt>portsentry</tt> to use the ''advanced'' mode, which listen to all the ports below a threashold, both for UDP and TCP. This could be an issue if a service try to bind himself, later to a dynamic port and if portsentry is already bound to this port. By default, the threshold is set to ''1024''
 
sed -i 's/TCP_MODE="tcp"/TCP_MODE="atcp"/' /etc/default/portsentry
sed -i 's/UDP_MODE="udp"/UDP_MODE="audp"/' /etc/default/portsentry
 
==== Block scans with IPTables, CHAOS and TCPWrappers ====
Then, let’s activate the scan blocking using IPTables and TCPWrappers. Portsentry will execute the provided <tt>iptables</tt> command and add the attacking host in the <tt>/etc/hosts.deny</tt> file. Both are useful because IPTables is not persistent, whereas TCP wrappers is persistent. Furthermore, I provide my own <tt>iptables</tt> command to use the ''CHAOS'' target instead of ''DROP''. The attacker knows that there is machine, ignoring the packets would inform him that we are protecting the machine and he will try something else. Using the ''CHAOS'' target returns random data, it will not look like we are protecting ourself but will not provide him useful information. '''It would be better''' to insert the iptable blocking rules '''after''' the iptables whitelist rule, and '''before''' the ''ACCEPT'' rules. I would need to know the white list rule number to do that, so I’d need to create a whitelist <tt>iptables</tt> chain in the IPTable configuration, but I did not. You can improve your scripts.
 
sed -i 's/BLOCK_UDP="0"/BLOCK_UDP="1"/' /etc/portsentry/portsentry.conf
sed -i 's/BLOCK_TCP="0"/BLOCK_TCP="1"/' /etc/portsentry/portsentry.conf
sed -i 's/RESOLVE_HOST = "0"/RESOLVE_HOST = "1"/' /etc/portsentry/portsentry.conf
sed -i 's/^KILL_ROUTE/#&/' /etc/portsentry/portsentry.conf
sed -i 's/^#\?KILL_ROUTE="\/sbin\/iptables -I INPUT -s $TARGET$ -j DROP"/KILL_ROUTE="\/sbin\/iptables -I INPUT -s $TARGET$ -j CHAOS"/' /etc/portsentry/portsentry.conf
 
==== Whitelist safe IPs ====
I can make some mistake, I could want to scan my own server… But I dont want to be blocked. Thus, I add my own IP address in the list to ignore and, just in case, I also add it to the TCPWrapper’s whitelist.
 
echo "ALL: ${LAN_IP}/${LAN_NM}" >> /etc/hosts.allow
echo "${LAN_IP}/${LAN_NM}" >> /etc/portsentry/portsentry.ignore.static
 
==== Apply the configuration ====
systemctl restart portsentry
 
=== Strengthen with Fail2ban ===
Fail2ban can use <tt>portsentry</tt> log to take further actions. When <tt>portsentry</tt> blocks a scan, it blocks it with <tt>iptables</tt> for TCP and UDP scans, but this is not persisted in case of server reboot or service restart. It uses also TCPWrappers, which are persisted. <tt>fail2ban</tt> will double block using <tt>iptables</tt>, but it also has a persisted database and will restore the blocking rules in case or restart.
 
> /var/lib/portsentry/portsentry.history
cat << EOF > /etc/fail2ban/jail.d/portsentry.conf
[portsentry]
enabled = true
EOF
systemctl restart fail2ban
<nowiki># h</nowiki>ttps://fcerbell.github.io/Debian113Server080Portsentrytoblockportscans-en/
 
== PortSentry - Port scan detection and active defense ==
E-Mail : craigrowland at users dot sourceforge dot net
Date : 05-23-2003
Version: 1.2
 
=== Introduction ===
This is the "long" install version. You should read this file if you want
to understand everything going on and the method to the madness in the
program logic. Skip to Install down below if you don't care about this.
 
More information can be obtained from http://sourceforge.net/projects/sentrytools
 
PortSentry has a number of options to detect port scans, when it finds one it
can react in the following ways:
 
- A log indicating the incident is made via syslog()
- The target host is automatically dropped into /etc/hosts.deny
for TCP Wrappers
- The local host is automatically re-configured to route all
traffic to the target to a dead host to make the target system
disappear.
- The local host is automatically re-configured to drop all
packets from the target via a local packet filter.
 
The purpose of this is to give an admin a heads up that their host is
being probed. There are similar programs that do this already (klaxon,
etc.) We have added a little twist to the whole idea (auto-blocking), plus
extensive support for stealth scan detection.
 
PortSentry has four "stealth" scan detection modes. Method one uses a
pre-defined list of ports to watch over. If someone pokes at them
it activates. The second method is what is called "inverse" port binding,
where every port under a range is watched *except* for those that the
system has bound for network daemons when the PortSentry starts or ones that
you've manually excluded. This is a very sensitive way for looking for
port probes, but also the most prone to false alarms.
 
=== Install ===
<nowiki>=-=-=-=</nowiki>
 
Step ONE:
 
Pull the portsentry_config.h file into your editor and make sure the
following are to your liking:
 
CONFIG_FILE - The path to the PortSentry configuration file.
WRAPPER_HOSTS_DENY - The path and name of TCP wrapper hosts.deny file.
SYSLOG_FACILITY - The syslog facility for PortSentry to use.
SYSLOG_LEVEL - The syslog level to send messages.
 
We suggest not changing any of these options unless you know what you
are doing.
 
NOTE: For advanced users, you may wish to change the SYSLOG_FACILITY from
LOG_DAEMON to LOG_LOCAL0 (or one of the other LOCAL reporting facilities).
This will allow you to edit the syslog.conf file and drop PortSentry
messages direcly to its own file on the system for separate monitoring.
 
SECOND NOTE: DO NOT DELETE THE "#" SIGNS FROM THIS FILE. They are NOT comments,
they are required by the C compiler to pre-process the headers. If you delete
the "#" signs you will get compile errors.
 
Step TWO:
 
Next, pull in portsentry.conf into your editor and check/change the
following options:
 
TCP_PORTS - A comma delimited string of TCP ports you want PortSentry to
listen to. This string can NOT have any spaces in it. You can put in as
many sockets as you want. PortSentry will try to bind them all up until
the default limit of 64.
 
For the stealth scan detection modes, the ports are not "bound" per se,
but they are monitored at the socket level for connections.
 
For the Advanced Stealth Scan Detection (see below). This list is *ignored*
 
UDP_PORTS - The same as above, except for UDP ports. You need to be
very careful with UDP mode as an attacker can forge a port sweep and
make you block any number of hosts. Use this option with caution, or
not at all if your host is a well-known Internet connected system.
 
For the Advanced Stealth Scan Detection (see below). This list is *ignored*
 
ADVANCED_PORTS_TCP - A number indicating the highest port number to
monitor down from. Any port *below* this number is then monitored. The
default is 1024 (reserved port range), but can be made as large as 65535
(system max). It's not recommended going over 1024 with this option.
 
ADVANCED_PORTS_UDP - Same as above, except for UDP.
 
ADVANCED_EXCLUDE_TCP - A comma delimited string of TCP ports that should
be manually excluded from monitoring in Advanced mode. These are normally
ports that may get hit by mistake by remote clients and shouldn't cause
alarms (ident, SSL, etc).
 
ADVANCED_EXCLUDE_UDP - Same as above, except for UDP.
 
IGNORE_FILE - The path to the file that contains IP addresses of hosts you
want to always be ignored. This will be explained later.
 
BLOCKED_FILE - The path to the file that contains the IP addresses of
blocked hosts.
 
RESOLVE_HOST - This option turns off DNS resolution for hosts. If you have a
slow DNS server it may be more effective to turn off resolution.
 
BLOCK_UDP - This option disables all automatic responses to UDP probes.
Because UDP can be easily forged, it may allow an attacker to start a
denial of service attack against the protected host, causing it to block
all manner of hosts that should normally be left alone. Setting this option
to "0" will disable all responses, although the connects are still logged.
This option is mainly useful for Internet exposed hosts. For internal hosts
you should leave this enabled. If someone internally is firing spoofed
packets at you, then you have a much bigger problem than a denial of service.
 
BLOCK_TCP - Same as above, but for TCP. Packet forgery is not as big a problem
though because PortSentry waits for a full connect to occur and this is much
harder to forge in the basic modes. Leave this enabled, even for
Internet connected hosts. For stealth scan detection modes the UDP warning
applies:
 
An attacker can cause you to block hosts you don't want to
through packet forgery.
 
KILL_ROUTE - This is the command to run to drop the offending route if
an attack is detected. This is the *full path* to the route command
along with the necessary parameters to make the command work. The macro
$TARGET$ will be substituted with the attacking host IP and is
REQUIRED in this option. Your gateway should be a *dead host* on the
local subnet. On some systems though you can just put in the localhost
address (127.0.0.1) and this will probably work. All packets from the
target host will get routed to this address so don't mess this up.
More modern route commands will include a "-blackhole" or "-reject" flag.
Check your man(1) pages and if your route command supports this feature
you should use it (although it's recommended using packet filtering
instead, see below).
 
Also be aware that this creates what is known as an "asynchronous
route" which basically means packets enter your host via one route
and are sent out on another (dead) route. This works OK for full
TCP connect requests, but for UDP and stealth scan modes it
still allows packets to activate PortSentry and you may get a
series of "already blocked" alarms by PortSentry. For UDP scans
this method prevents ICMP messages from returning to the attacker
so all ports appear open. However, if the attacker is performing
an actual exploit with UDP the drop route method will not work.
The asynchronous route allows the packet to hit the system and the
attacker could perform a "blind" attack with UDP if they know what
the responses are going to be.
 
By far the best method is to use the local packet filter (such as Linux
ipfwadm/ipchains or *BSD ipfw). This is a much cleaner solution and is
detailed in the config file. The macro $PORT$ will substitute the port
that was connected to by the attacker, but this is NOT required for this
option. The macro $MODE$ reports what mode the blocking occurred in
(tcp, udp, stcp, sudp, atcp, audp) but is also NOT required.
 
KILL_HOSTS_DENY - This is the format of the string to drop into the
hosts.deny file that TCP wrappers uses. Again the $TARGET$ macro is
expanded out to be the IP of the attacker and is required. You can
also drop in any TCP wrapper escape codes here as well (%h, twist,
etc). The macro $PORT$ will substitute the port that was connected to
by the attacker, but this is NOT required for this option. The macro
$MODE$ reports what mode the blocking occurred in (tcp, udp, stcp,
sudp, atcp, audp) but is also NOT required.
 
KILL_RUN_CMD - This is a command you want run *before* the route
is dropped to the attacker. You can put in any program/script you want
executed when an attack is detected. WE NEVER RECOMMEND PUTTING IN
RETALIATORY ACTION AGAINST AN ATTACKING HOST. Virtually every time you're
are port scanned the host doing the scanning has been compromised itself.
Therefore, if you retaliate you are probably attacking an innocent(?)
party. Also the goal of security is to make the person GO AWAY. You don't
want to irritate them into making a personal vendetta against you.
Remember, even a 13 year old can run a [insert favorite D.O.S. program
here] attack against you from their Windows box to make your life
miserable. As above, the $TARGET$, $PORT$, and $MODE$ macros are
available to you but they are not required with this option as above.
 
KILL_RUN_CMD_FIRST - Setting this to "0" makes the command above run
before the route is dropped. Setting it to "1" makes the command run
aftter the blocking has occurred.
 
SCAN_TRIGGER - PortSentry has a state engine that will remember hosts
that connected to it. Setting this value will tell PortSentry to allow X
number of grace port hits before it reacts. This will detect both
sequential and random port sweeps. The default is 0 which will react
immediately. A setting of 1 or 2 will reduce false alarms, anything
higher is probably too much as anything more than 3 hits to different
ports is pretty suspicious behavior. Usually you can leave this at 0
without any consequence, with the exception of Advanced stealth scan
detection modes where you may create a "hair trigger" if you aren't
careful. Use your own discretion.
 
PORT_BANNER - A text banner you want displayed to the connecting host if
the PortSentry is activated. Leave this commented out if you don't want this
feature. If you do use it, try not to taunt the person too badly. It's
recommended keeping it professional and to the point. The banner is *not*
displayed when stealth scan detection modes are used.
 
Step THREE:
 
Pull the portsentry.ignore file into your editor and add in any host you
want to have ignored if it connects to a tripwired port. This should always
contain at least the localhost (127.0.0.1) and the IP's of the local
interfaces. We would *not* recommend putting in every machine IP on your
network, but you can use a netmask to do this. Format for this is:
 
<IP Address>/<Netmask Bits>
 
192.168.2.0/24
192.168.0.0/16
etc.
 
We don't recommend ignoring too much. It may be important for you to see
who is connecting to you, even if it is a "friendly" machine. This can
help you detect internal host compromises faster. To answer your paranoia,
yes this does happen and we've had cases of admins ignoring too much and
getting hacked by their own machines as a result with no warning.
 
Step FOUR:
 
Compile. Type make and pick your system type and allow it to build and install.
The default directory is /usr/local/psionic/portsentry. If you don't like
this directory just edit the Makefile and make sure your portsentry.conf and
portsentry_config.h files reflect the new path.
 
Type make install after the build to have it copy files to your install
directory.
 
Step FIVE:
 
Start up PortSentry. PortSentry has six modes of operation. ONLY ONE PROTOCOL MODE
TYPE CAN BE STARTED AT A TIME (i.e. one TCP mode and one UDP mode) The available
modes are:
 
portsentry -tcp (basic port-bound TCP mode)
portsentry -udp (basic port-bound UDP mode)
portsentry -stcp (Stealth TCP scan detection)
portsentry -atcp (Advanced TCP stealth scan detection)
portsentry -sudp ("Stealth" UDP scan detection)
portsentry -audp (Advanced "Stealth" UDP scan detection)
 
-tcp - Basic port-bound TCP mode
 
PortSentry will check the config files and then bind to all the TCP ports in
the background. If you want to check the init status you should just look
in your local syslog file that you are having the messages directed to.
 
-udp - Basic port-bound UDP mode
 
PortSentry will check the config files and then bind to all the UDP ports in
the background. If you want to check the init status you should just look
in your local syslog file that you are having the messages directed to.
UDP/Stealth scan warnings apply (read: README.stealth).
 
-stcp - Stealth TCP scan detection mode
 
PortSentry will use a raw socket to monitor all incoming packets. If an incoming
packet is destined for a monitored port it will react to block the host. This
method will detect connect() scans, SYN/half-open scans, and FIN scans.
UDP/Stealth scan warnings apply (read: README.stealth).
 
-sudp - "Stealth" UDP scan detection mode
 
This operates the same as the TCP stealth mode above. UDP ports need to be
listed and they are then monitored. This does not bind any sockets, and
while not really "stealth" scan detection (doesn't usually apply to UDP),
it operates in a similar manner (reacts to *any* UDP packet). UDP/Stealth
scan warnings apply (read: README.stealth).
 
-atcp - Advanced TCP stealth scan detection mode
 
PortSentry will start by making a list of all the ports listening in the port
area under the ADVANCED_PORTS_TCP option and will then create an exclusion
list based on these ports. Any host connecting to *any port* in this range
that is *not excluded* (i.e not a listening network daemon [SMTP, HTTP,
etc.]) is blocked. This has some very powerful implications that you
should be aware of:
 
1) This mode is the most sensitive and the most effective of all the protection
options. It reacts to port probes with lightning speed because you don't have
to wait for them to hit a tripwired port.
 
2) Because it reacts so abruptly, you may cut off legitimate traffic. A
FTP site may send an ident request at you. If you are monitoring the
ident port (113 TCP) then you have just cut off the FTP site you were
going to! As a result you should put in ports that fall into this
situation in this list.
 
<nowiki>** Advanced Logic Mode ** - PortSentry is intelligent about how it monitors</nowiki>
ports. For some protocols such as FTP the client actually opens up ports
in the ephemeral range (1024-65535) and the server then connects *back* to
you. This would normally cause the port scanner to activate. PortSentry though
will look at the incoming connection and determine if it is destined for
one of these "temporary" bindings. If it is, then the connection is
ignored for that one time. As soon as the connection is torn down the
window closes and full protection is back again. This is in fact a
rudimentary stateful inspection engine. UDP/Stealth scan warnings apply
(read: README.stealth).
 
-audp - Advanced UDP "stealth" scan detection mode
 
This is the same as above except for the UDP protocol. This is a very
advanced option and you stand a good chance of causing false alarms. This
is because PortSentry makes no distinction between broadcast and direct
traffic. If you have a router on your local network putting out RIP
broadcasts then there is a good likelihood you will block them. Use this
option with extreme caution. You need to be sure you put in these
exclusions into the ADVANCED_EXCLUDE_UDP line (i.e 520 [RIP]) UDP/Stealth
scan warnings apply (read: README.stealth).
 
Test the install:
 
Tail the local log and you should see several PortSentry initialization
messages.
 
A successful startup looks like this:
 
Oct 9 09:11:35 nemesis portsentry[1644]: adminalert: portsentry is
starting.
Oct 9 09:11:36 nemesis portsentry[1644]: adminalert: Going into listen
mode on TCP port: 143
. . .
Oct 9 09:11:37 nemesis portsentry[1644]: adminalert: PortSentry is now active and
listening.
 
<nowiki>************************************************************************</nowiki>
<nowiki>** The last line indicates the PortSentry is properly initialized, if **</nowiki>
<nowiki>** you don't see it then something failed. </nowiki> <nowiki>**</nowiki>
<nowiki>************************************************************************</nowiki>
 
You should see all the ports you told it to listen to in the log. If a port
is in use PortSentry will give you a warning that it couldn't bind to it and will
continue on until all the other ports are bound. If *none* of the ports
could be bound it will exit with an error.
 
For the Advanced stealth scan detection mode it will list the ports that it
will *not* listen for. This is an inverse binding.
 
Now you can go to another host and telnet to a booby-trapped port. DO NOT DO THIS
FROM YOUR ONLY ACCESS POINT TO THE PROTECTED HOST BECAUSE YOU WILL BLOCK
YOURSELF OFF COMPLETELY IF IT WORKS. You should immediately see something like:
 
Oct 9 09:12:44 nemesis portsentry[1644]: attackalert: Connect from
host: 123.345.56.78 to TCP port: 143
 
Oct 9 09:12:46 nemesis portsentry[1644]: attackalert: Host
server.haxor.org/123.345.56.78 has been blocked via dropped route.
 
Oct 9 09:12:46 nemesis portsentry[1644]: attackalert: Host
server.haxor.org/123.345.56.78 has been blocked via wrappers.
 
For advanced mode you can telnet to any port not excluded to trip an
alarm.
 
If you disconnect and try to telnet back again you should find that the
target system is now unreachable. Congratulations you are now operational.
 
If you are running Logcheck this will show up in the next pass and
it should be screaming at you.
 
If you do a netstat -rn you will see the suspect host pointed at the dead
route you supplied (unless using a packet filter, which is recommended).
 
Drop the PortSentry commands in a startup file and get back to work as
you are done.
 
How will it help?
 
Here are some ideas:
 
- Run as a UDP service on port 69 to catch TFTP probes.
- Run as a UDP service on port 161,162 to catch SNMP probes.
- Run as a UDP service in the port range 32000-33000 to catch RPC
probes.
- Run as a TCP service on port 143 to catch IMAP probes.
- Run as a TCP service on ports 11,15 to catch netstat/systat
probes.
- etc.
 
The fact is that PortSentry reacts quickly enough that a port scan of your
host by an attacker will be stopped within one second after hitting any
tripwired port, even faster in the Advanced TCP stealth scan detection
mode.
 
For any type of UDP scan it will prove highly irritating for the person
trying to scan you as all the ports will likely appear "open." For TCP scans
the attacker will simply get no response whatsoever.
 
Safety
<nowiki>=-=-=-</nowiki>
 
If we missed anything in the program's safety considerations we would very
much like to hear about it before you post it to BugTraq :).
 
Messages
<nowiki>=-=-=-=-</nowiki>
 
To the best we could, all states/errors/successes and unknowns are written
to the syslog. The following tags identify each one:
 
adminalert: - Some message indicating the status of the PortSentry.
securityalert: - A message indicating a security relevant event occurred.
attackalert: - A host has tripped a sensor and an action was performed.
 
Files
<nowiki>=-=-=</nowiki>
 
As it stands now, all hosts are dropped into the portsentry.blocked.* file
when they are blocked as well as a portsentry.history file. The blocked file
is erased each time PortSentry is restarted. The history file is simply
appended to and can be used as a record of all hosts that have been blocked
to date. The portsentry.blocked.* has an appended extension indicating what mode
it applies to. I.E.:
 
portsentry.blocked.tcp
portsentry.blocked.udp
portsentry.blocked.stcp
portsentry.blocked.sudp
portsentry.blocked.atcp
portsentry.blocked.audp
 
Each file is created depending on what startup mode is selected and is removed
when PortSentry re-starts.
 
The way the route blocking works is that it drops the *return* route to the
attacking host, not the *incoming* route. If an attacker is doing a UDP
scan of your host the packets will still trip the sensor, they just don't
return to the host. If the blocked file did not exist the host would be
written possibly hundreds or thousands of times to hosts.deny!! This is not
good. A better solution is to integrate in with a real packet filter
locally (ala Linux ipfwadm which is supported or any other similar
package on your system).
 
After a period of time elapses you may wish to delete the local dead route
to the offender and keep them in the hosts.deny file. This is solely your
choice. If you wish to re-enable blocking should the offender return, just
re-start PortSentry or delete the individual entry from the blocked file.
 
If you need to restore the route to the blocked host on most systems you can
simply delete the route like so:
 
Linux:
 
route del <ip_address> reject
 
Others:
 
route delete <ip_address> <dead_route>
 
Or you can simply flush your packet filters.
 
That's about it. It's highly recommended you use Logcheck to keep an eye
on things in the log files as well so you can detect other problems, and
see what the PortSentry is saying to you. You can find this program at:
 
http://sourceforget.net/projects/sentrytools
 
== Links ==
https://www.computersecuritystudent.com/UNIX/UBUNTU/1204/lesson14/index.html
https://etutorials.org/Linux+systems/red+hat+linux+bible+fedora+enterprise+edition/Part+III+Administering+Red+Hat+Linux/Chapter+14+Computer+Security+Issues/Guarding+Your+Computer+with+PortSentry/
 
https://www.digitalocean.com/community/tutorials/how-to-set-up-a-firewall-with-ufw-on-ubuntu-20-04-de
</noinclude>

Aktuelle Version vom 12. November 2024, 18:40 Uhr

Portsentry - Daemon zum Erkennen von Portscans

Beschreibung

PortSentry kann Port-Scans (einschließlich verdeckter Scans) auf die Netzwerkschnittstellen Ihrer Maschine erkennen. Bei einem Alarm kann er den Angreifer über hosts.deny, entferntem Route-Eintrag oder per Firewall-Regel blockieren. Er ist Teil der Programmsuite Abacus.

Hinweis
Wenn Sie keine Ahnung haben, was ein (verdeckter) Portscan ist, wird ein Blick auf http://sf.net/projects/sentrytools/ empfohlen, bevor Sie dieses Paket installieren. Andernfalls könnten Sie Rechner blockieren, die Sie besser nicht blockieren sollten (z.B. Ihren NFS-Server, Nameserver, usw.).
PortSentry blockt standardmäßig nichts
  • Bitte beachten Sie, dass PortSentry standardmäßig keine Aktionen gegen potenzielle Angreifer durchführt.
  • Er schreibt nur Informationen nach /var/log/syslog.
  • Um dies zu ändern, passen Sie bitte die Datei /etc/portsentry/portsentry.conf entsprechend an.
Beachten Sie folgende Dateien
  • /etc/default/portsentry (Daemon Start-Optionen)
  • /etc/portsentry/portsentry.ignore.static (zu ignorierende Rechner/Schnittstellen)

Für weitere Informationen lesen Sie bitte die portsentry(8)- und portsentry.conf(5)-Handbuchseiten.

This manual page documents briefly the portsentry command. This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page.

portsentry is a program that tries to detect portscans on network interfaces with the ability to detect stealth scans. On alarm portsentry can block the scanning machine via hosts.deny (see hosts_access(5), firewall rule (see ipfwadm(8), ipchains(8) and iptables(8)) or dropped route (see route(8)).

Installation

# apt install portsentry

Files

/etc/default
/etc/init.d/portsentry
/etc/portsentry/portsentry.conf
/etc/portsentry/portsentry.ignore.static
/etc/ppp/ip-down.d
/etc/ppp/ip-down.d/portsentry
/etc/ppp/ip-up.d
/etc/ppp/ip-up.d/portsentry
/usr/lib/portsentry/portsentry-add-ip
/usr/lib/portsentry/portsentry-build-ignore-file
/usr/lib/portsentry/portsentry-rm-ip
/usr/sbin/portsentry
/usr/share/doc/portsentry
/usr/share/doc/portsentry/CREDITS.gz
/usr/share/doc/portsentry/README.COMPAT
/usr/share/doc/portsentry/README.Debian
/usr/share/doc/portsentry/README.install.gz
/usr/share/doc/portsentry/README.methods.gz
/usr/share/doc/portsentry/README.stealth.gz
/usr/share/doc/portsentry/TODO.Debian
/usr/share/doc/portsentry/changelog.Debian.amd64.gz
/usr/share/doc/portsentry/changelog.Debian.gz
/usr/share/doc/portsentry/changelog.gz
/usr/share/doc/portsentry/copyright
/usr/share/doc/portsentry/examples/ignore.csh
/usr/share/doc/portsentry/examples/kill_cmd
/usr/share/doc/portsentry/examples/scan-detect
/usr/share/man/man5/portsentry.conf.5.gz
/usr/share/man/man8/portsentry.8.gz
/var
/var/lib
/var/lib/portsentry

Aufruf

portsentry [ -tcp | -stcp | -atcp ]
portsentry [ -udp | -sudp | -audp ]

Optionen

Option Beschreibung
-tcp tcp portscan detection on ports specified under TCP_PORTS in the config file /etc/portsentry/portsentry.conf.
-stcp As above but additionally detect stealth scans.
-atcp Advanced tcp or inverse mode. Portsentry binds to all unused ports below ADVANCED_PORTS_TCP given in the config file /etc/portsentry/portsentry.conf.
-udp udp portscan detection on ports specified under UDP_PORTS in the config file /etc/portsentry/portsentry.conf.
-sudp As above but additionally detect "stealth" scans.
-audp Advanced udp or inverse mode. Portsentry binds to all unused ports below ADVANCED_PORTS_UDP given in the config file /etc/portsentry/portsentry.conf.

For details on the various modes see /usr/share/doc/portsentry/README.install

Parameter

Umgebung

Rückgabewert

Anwendung

Dienstverwaltung

# systemctl status portsentry.service
● portsentry.service - LSB: # start and stop portsentry
     Loaded: loaded (/etc/init.d/portsentry; generated)
     Active: active (running) since Fri 2023-06-30 10:58:34 CEST; 1h 45min ago
       Docs: man:systemd-sysv-generator(8)
    Process: 14255 ExecStart=/etc/init.d/portsentry start (code=exited, status=0/SUCCESS)
      Tasks: 2 (limit: 76987)
     Memory: 1.1M
        CPU: 71ms
     CGroup: /system.slice/portsentry.service
             ├─14266 /usr/sbin/portsentry -tcp
             └─14270 /usr/sbin/portsentry -udp

Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 34555
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 31335
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32770
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32771
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32772
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32773
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 32774
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 31337
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: Going into listen mode on UDP port: 54321
Jun 30 10:58:34 lincln02 portsentry[14270]: adminalert: PortSentry is now active and listening.


Problembehebung

Konfiguration

portsentry keeps all its configuration files in /etc/portsentry. portsentry.conf is portsentry's main configuration file. See portsentry.conf(5) for details.

The file portsentry.ignore contains a list of all hosts that are ignored, if they connect to a tripwired port. It should contain at least the localhost(127.0.0.1), 0.0.0.0 and the IP addresses of all local interfaces. You can ignore whole subnets by using a notation <IP Address>/<Netmask Bits>. It is *not* recommend putting in every machine IP on your network. It may be important for you to see who is connecting to you, even if it is a "friendly" machine. This can help you detect internal host compromises faster.

If you use the /etc/init.d/portsentry script to start the daemon, portsentry.ignore is rebuild on each start of the daemon using portsentry.ignore.static and all the IP addresses found on the machine via ifconfig.

/etc/default/portsentry specifies in which protocol modes portsentry should be startet from /etc/init.d/portsentry There are currently two options: 

TCP_MODE= either tcp, stcp or atcp (see OPTIONS above).
UDP_MODE= either udp, sudp or audp (see OPTIONS above).

The options above correspond to portsentry's commandline arguments. For example TCP_MODE="atcp" has the same effect as to start portsentry using portsentry -atcp. Only one mode per protocol can be started at a time (i.e. one tcp and one udp mode).


Dateien

Option Beschreibung
/etc/portsentry/portsentry.conf main configuration file
/etc/portsentry/portsentry.ignore IP addresses to ignore
/etc/portsentry/portsentry.ignore.static static IP addresses to ignore
/etc/default/portsentry startup options
/etc/init.d/portsentry script responsible for starting and stopping the daemon
/var/lib/portsentry/portsentry.blocked.* blocked hosts(cleared upon reload)
/var/lib/portsentry/portsentry.history history file


Anhang

Siehe auch

Dokumentation

  1. /usr/share/doc/portsentry/README.install
RFC
Man-Page
  1. portsentry.conf(5)
  2. hosts_access(5)
  3. hosts_options(5)
  4. route(8)
  5. ipfwadm(8)
  6. ipchains(8)
  7. iptables(8)
  8. ifconfig(8)
Info-Pages

Links

Projekt
Weblinks
  1. https://www.computersecuritystudent.com/UNIX/UBUNTU/1204/lesson14/index.html
  2. https://etutorials.org/Linux+systems/red+hat+linux+bible+fedora+enterprise+edition/Part+III+Administering+Red+Hat+Linux/Chapter+14+Computer+Security+Issues/Guarding+Your+Computer+with+PortSentry/
  3. https://www.digitalocean.com/community/tutorials/how-to-set-up-a-firewall-with-ufw-on-ubuntu-20-04-de
Abgerufen von „https://wiki.foxtom.de/index.php?title=Portsentry&oldid=115099“