Nc

nc — arbitrary TCP and UDP connections and listens topic kurze Beschreibung

Beschreibung

The nc (or netcat) utility is used for just about anything under the sun involving TCP, UDP, or UNIX-domain sockets. It can open TCP connections, send UDP packets, listen on arbitrary TCP and UDP ports, do port scanning, and deal with both IPv4 and IPv6. Unlike telnet(1), nc scripts nicely, and sepa‐ rates error messages onto standard error instead of sending them to standard output, as telnet(1) does with some.

Common uses include:

• simple TCP proxies
• shell-script based HTTP clients and servers
• network daemon testing
• a SOCKS or HTTP ProxyCommand for ssh(1)
• and much, much more

Syntax

$ nc [-46bCDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] [-m minttl] [-O length] [-P proxy_username] [-p source_port] [-q seconds] [-s sourceaddr]
     [-T keyword] [-V rtable] [-W recvlimit] [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] [destination] [port]

Testfragen

Testfrage 1

Antwort1

Testfrage 2

Antwort2

Testfrage 3

Antwort3

Testfrage 4

Antwort4

Testfrage 5

Antwort5

TMP

CLIENT/SERVER MODEL It is quite simple to build a very basic client/server model using nc. On one console, start nc listening on a specific port for a connection. For example:

$ nc -l 1234

nc is now listening on port 1234 for a connection. On a second console (or a second machine), connect to the machine and port being listened on:

$ nc -N 127.0.0.1 1234

There should now be a connection between the ports. Anything typed at the second console will be concatenated to the first, and vice-versa. After the connection has been set up, nc does not really care which side is being used as a ‘server’ and which side is being used as a ‘client’. The connection may be terminated using an EOF (‘^D’), as the -N flag was given.

There is no -c or -e option in this netcat, but you still can execute a command after connection being established by redirecting file descriptors. Be cautious here because opening a port and let anyone connected execute arbitrary command on your site is DANGEROUS. If you really need to do this, here is an example:

On ‘server’ side:

$ rm -f /tmp/f; mkfifo /tmp/f
$ cat /tmp/f | /bin/sh -i 2>&1 | nc -l 127.0.0.1 1234 > /tmp/f

On ‘client’ side:

$ nc host.example.com 1234
$ (shell prompt from host.example.com)

By doing this, you create a fifo at /tmp/f and make nc listen at port 1234 of address 127.0.0.1 on ‘server’ side, when a ‘client’ establishes a connec‐ tion successfully to that port, /bin/sh gets executed on ‘server’ side and the shell prompt is given to ‘client’ side.

When connection is terminated, nc quits as well. Use -k if you want it keep listening, but if the command quits this option won't restart it or keep nc running. Also don't forget to remove the file descriptor once you don't need it anymore:

$ rm -f /tmp/f

DATA TRANSFER

The example in the previous section can be expanded to build a basic data transfer model. Any information input into one end of the connection will be output to the other end, and input and output can be easily captured in order to emulate file transfer.

Start by using nc to listen on a specific port, with output captured into a file:

$ nc -l 1234 > filename.out

Using a second machine, connect to the listening nc process, feeding it the file which is to be transferred:

$ nc -N host.example.com 1234 < filename.in

After the file has been transferred, the connection will close automatically.

TALKING TO SERVERS

It is sometimes useful to talk to servers “by hand” rather than through a user interface. It can aid in troubleshooting, when it might be necessary to verify what data a server is sending in response to commands issued by the client. For example, to retrieve the home page of a web site:

$ printf "GET / HTTP/1.0\r\n\r\n" | nc host.example.com 80

Note that this also displays the headers sent by the web server. They can be filtered, using a tool such as sed(1), if necessary.

More complicated examples can be built up when the user knows the format of requests required by the server. As another example, an email may be sub‐ mitted to an SMTP server using:

$ nc [-C] localhost 25 << EOF
HELO host.example.com
MAIL FROM:<user@host.example.com>
RCPT TO:<user2@host.example.com>
DATA
Body of email.
.
QUIT
EOF

PORT SCANNING

It may be useful to know which ports are open and running services on a target machine. The -z flag can be used to tell nc to report open ports, rather than initiate a connection. Usually it's useful to turn on verbose output to stderr by use this option in conjunction with -v option.

For example:

$ nc -zv host.example.com 20-30
Connection to host.example.com 22 port [tcp/ssh] succeeded!
Connection to host.example.com 25 port [tcp/smtp] succeeded!

The port range was specified to limit the search to ports 20 - 30, and is scanned by increasing order (unless the -r flag is set).

You can also specify a list of ports to scan, for example:

$ nc -zv host.example.com http 20 22-23
nc: connect to host.example.com 80 (tcp) failed: Connection refused
nc: connect to host.example.com 20 (tcp) failed: Connection refused
Connection to host.example.com port [tcp/ssh] succeeded!
nc: connect to host.example.com 23 (tcp) failed: Connection refused

The ports are scanned by the order you given (unless the -r flag is set).

Alternatively, it might be useful to know which server software is running, and which versions. This information is often contained within the greet‐ ing banners. In order to retrieve these, it is necessary to first make a connection, and then break the connection when the banner has been retrieved. This can be accomplished by specifying a small timeout with the -w flag, or perhaps by issuing a "QUIT" command to the server:

$ echo "QUIT" | nc host.example.com 20-30
SSH-1.99-OpenSSH_3.6.1p2
Protocol mismatch.
220 host.example.com IMS SMTP Receiver Version 0.84 Ready

EXAMPLES

Open a TCP connection to port 42 of host.example.com, using port 31337 as the source port, with a timeout of 5 seconds:

$ nc -p 31337 -w 5 host.example.com 42

Open a UDP connection to port 53 of host.example.com:

$ nc -u host.example.com 53

Open a TCP connection to port 42 of host.example.com using 10.1.2.3 as the IP for the local end of the connection:

$ nc -s 10.1.2.3 host.example.com 42

Create and listen on a UNIX-domain stream socket:

$ nc -lU /var/tmp/dsocket

Connect to port 42 of host.example.com via an HTTP proxy at 10.2.3.4, port 8080. This example could also be used by ssh(1); see the ProxyCommand di‐ rective in ssh_config(5) for more information.

$ nc -x10.2.3.4:8080 -Xconnect host.example.com 42

The same example again, this time enabling proxy authentication with username “ruser” if the proxy requires it:

$ nc -x10.2.3.4:8080 -Xconnect -Pruser host.example.com 42

SEE ALSO

1. cat(1)
2. ssh(1)

AUTHORS

Original implementation by *Hobbit* <hobbit@avian.org>. Rewritten with IPv6 support by Eric Jackson <ericj@monkey.org>. Modified for Debian port by Aron Xu ⟨aron@debian.org⟩.

CAVEATS

UDP port scans using the -uz combination of flags will always report success irrespective of the target machine's state. However, in conjunction with a traffic sniffer either on the target machine or an intermediary device, the -uz combination could be useful for communications diagnostics. Note that the amount of UDP traffic generated may be limited either due to hardware resources and/or configuration settings.