Nvtop: Unterschied zwischen den Versionen

Version vom 24. Juli 2022, 10:08 Uhr

nvtop - NVIDIA GPU top

nvtop is a ncurses-based GPU status viewer for NVIDIA GPUs

# apt install nvtop

nvtop [-hv] [-si id1:id2:...]  [-d delay]

Unix	GNU	Beschreibung
-d	--delay=delay	Delay between updates, in tenths of seconds (delay * 0.1s)
-h	--help	Print the help and exit.
-d	delay=delay	Delay between updates, in tenths of seconds (delay * 0.1s).
-h	help	Print the help and exit.
-s	gpu-select=id1:...	Colon separated list of GPU IDs to be monitored by nvtop.
-i	gpu-ignore=id1:...	Colon separated list of GPU IDs to be ignored by nvtop.
-C	no-color	Monochrome mode.
-f	freedom-unit	Use fahrenheit as temperature scale.
-E	encode-hide=seconds	Modify the setting for the encode/decode auto-hide timer. Always visible if negative. Default to 30 seconds.
-r	reverse-abs	Reverse abscissa: switch the plot data order from "old --- recent" (default) to "recent --- old".
-p	no-plot	Show only one bar plot corresponding to the maximum of all GPUs.
-v	version	Print the version and exit.

Testfrage 1

Antwort1

Testfrage 2

Antwort2

Testfrage 3

Antwort3

Testfrage 4

Antwort4

Testfrage 5

Antwort5

@@ Zeile 1: / Zeile 1: @@
-'''topic''' kurze Beschreibung
+'''nvtop''' - NVIDIA GPU top
 == Beschreibung ==
+nvtop is a ncurses-based GPU status viewer for NVIDIA GPUs
 == Installation ==
+ # apt install nvtop
 == Anwendungen ==
 == Syntax ==
+ nvtop [-hv] [-si id1:id2:...]  [-d delay]
 === Optionen ===
+{| class="wikitable sortable"
+|-
+! Unix !! GNU !! Beschreibung
+|-
+| -d || --delay=delay || Delay between updates, in tenths of seconds (delay * 0.1s)
+|-
+| -h || --help || Print the help and exit.
+|-
+| -d || delay=delay || Delay between updates, in tenths of seconds (delay * 0.1s).
+|-
+| -h || help || Print the help and exit.
+|-
+| -s || gpu-select=id1:... || Colon separated list of GPU IDs to be monitored by nvtop.
+|-
+| -i || gpu-ignore=id1:... || Colon separated list of GPU IDs to be ignored by nvtop.
+|-
+| -C || no-color || Monochrome mode.
+|-
+| -f || freedom-unit || Use fahrenheit as temperature scale.
+|-
+| -E || encode-hide=seconds || Modify the setting for the encode/decode auto-hide timer. Always visible if negative. Default to 30 seconds.
+|-
+| -r || reverse-abs || Reverse abscissa: switch the plot data order from "old --- recent" (default) to "recent --- old".
+|-
+| -p || no-plot || Show only one bar plot corresponding to the maximum of all GPUs.
+|-
+| -v || version || Print the version and exit.
+|}
 === Parameter ===
 === Umgebungsvariablen ===