Kategorie:T2600G/System: Unterschied zwischen den Versionen

System Info

View port- and system-information

• Port Status
• System Summary
• Device Description
• System Time
• Daylight Saving Time

Information about each port

• Select an UNIT, and move your mouse to a port.
• Then the type, speed and status of this port will be displayed

Appearance of the port indicates its current status

• Indicates the 1000M port is not connected to a device.
• Indicates the 1000M port is at the speed of 1000Mbps.
• Indicates the 1000M port is at the speed of 10Mbps or 100Mbps.
• Indicates the SFP port is not connected to a device.
• Indicates the SFP port is at the speed of 1000Mbps.
• Indicates the SFP port is at the speed of 100Mbps.

Bandwidth Utilization

Click a port and the bandwidth utilization will be displayed in the diagram.

System Info

You can view the system information of each UNIT. The displayed information options are as follows:

System Description

Displays the system description of the switch.

Device Name

Displays the name of the switch. You can edit it on the Device Description page.

Device Location

Displays the location of the switch. You can edit it on the Device Description page.

Contact Information

Displays the contact information of the switch. You can edit it on the Device Description page.

Hardware Version

Displays the hardware version of the switch.

Firmware Version

Displays the firmware version of the switch.

Boot Loader Version

Displays the Boot Loader Version of the switch.

MAC Address

Displays the MAC address of the switch.

System Time

Displays the system time of the switch.

Running Time

Displays the running time of the switch.

Serial Number

Displays the serial number of the switch.

Jumbo Frame

Displays whether Jumbo Frame is enabled. You can click Settings to jump to the Jumbo Frame configuration page.

SNTP

Displays whether the switch gets system time from NTP Server. You can click Settings to jump to the System Time configuration page.

IGMP Snooping

Displays whether IGMP Snooping is enabled. You can click Settings to jump to the IGMP Snooping configuration page.

SNMP

Displays whether SNMP is enabled. You can click Settings to jump to the SNMP configuration page.

Spanning Tree

   Displays whether Spanning Tree is enabled. You can click Settings to jump to the Spanning Tree configuration page.

DHCP Relay

   Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP Relay configuration page.

802.1x

   Displays whether 802.1x is enabled. You can click Settings to jump to the 802.1x configuration page.

HTTP Server

   Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP configuration page.

Telnet

   Displays whether Telnet is enabled. You can click Settings to jump to the Telnet configuration page.

SSH

   Displays whether SSH is enabled. You can click Settings to jump to the SSH configuration page.

User Management

System Tools

• Boot Config
• Restore Config
• Backup Config
• Firmware Upgrade
• DHCP Auto Install
• System Reboot
• System Reset

EEE

EEE (Energy Efficient Ethernet) is used to reduce the power consumption of the switch during periods of low data transmission. You can simply enable this feature on ports to allow power reduction.

SDM Template

SDM (Switch Database Management)Template is used to distribute system resources to different applications such as ACL and ARP Detection. The switch provides three templates with different resource allocations. You can view the details of the three templates and choose one according to your needs.

Time Range

• Time Range Config
• Holiday Config

You can configure time ranges on this page. Time ranges can be referenced by other functions like PoE or ACL rules, which can decides the effective time period of the functions. To configure a time range:

Step1:

   Go to Time-Range > Holiday Config page, click Add to create one or more Holiday rules.

Step2:

   On the Time-Range > Time-Range Config page, click Add to create a Time-Range entry.

Step3:

   On the configuration page, specify the time-range parameters and click Add to create one or more Period Time entries.

Time Range Table

You can view the Time-Range entries in this table.

Time-Range Name

   Displays the name of the entry.

Holiday

   Displays the holiday rule of the entry.

Status

   Displays whether the entry is active at present.

Time-Range Config

In this section, you can configure the global parameters of the Time-Range entry.

Name

   Specify a name for the entry.

Holiday

   Select to include or exclude the holiday in the time range.

Exclude

   The time range will not take effect on holidays.

Include

   The time range will still take effect on holidays.

Period Time Config

In this section, you can create Period Time entries. If you create more than one entry, all the time ranges of these entries will take effect.

Date

   Specify the start date and end date for this time range.

Time

   Specify the start time and end time each day for this time range.

Day of Week

   Select the days of the week for this time range.