Kategorie:T2600G/Security:Access: Unterschied zwischen den Versionen

Access Control

You can control the users' access to the switch by filtering IP address, MAC address or port on this page.

Configure Access Control

1. Enable Access Control globally, then select the control mode.
2. Click Add to load the configuration page, select the access interface where to control the users' access, and specify the desired IP address/mask, MAC address or ports based on the control mode.

Global Config

Access Control

Enable or disable Access Control.

Control Mode

Select the control mode for users to log in to the web management page.

IP-based

Only the users within the IP-range you set here are allowed to access the switch.

MAC-based

Only the users with the MAC address you set here are allowed to access the switch.

Port-based

Only the users connecting to the ports you set here are allowed to access the switch.

Entry Config

Port/IP/MAC

Displays the port number/IP address/MAC address of the entry.

Access Interface

Displays the access interface you set of the entry.

Operation

Here you can modify or delete the desired entry.

HTTP Config

HTTPS Config

SSH Config

Telnet Config

Serial Port Config