T2600G/Security/Access/Control: Unterschied zwischen den Versionen
K Dirkwagner verschob die Seite T2600G:Security:Access:Access Control nach T2600G:Security:Access:Control, ohne dabei eine Weiterleitung anzulegen |
Keine Bearbeitungszusammenfassung |
||
| Zeile 28: | Zeile 28: | ||
| Operation || Here you can modify or delete the desired entry. | | Operation || Here you can modify or delete the desired entry. | ||
|} | |} | ||
[[Kategorie:T2600G:Security]] | [[Kategorie:T2600G:Security:Access]] | ||
Version vom 9. Januar 2023, 12:37 Uhr
Access Control
- Control access to the switch by filtering IP address, MAC address or port
- Configure Access Control
- Enable Access Control globally, then select the control mode.
- Click Add to load the configuration page, select the access interface where to control the users' access, and specify the desired IP address/mask, MAC address or ports based on the control mode.
Global Config
Entry Config
| Option | Beschreibung |
|---|---|
| Access Control | Enable or disable Access Control. |
| Control Mode | Select the control mode for users to log in to the web management page. |
| IP-based | Only the users within the IP-range you set here are allowed to access the switch. |
| MAC-based | Only the users with the MAC address you set here are allowed to access the switch. |
| Port-based | Only the users connecting to the ports you set here are allowed to access the switch. |
| Port/IP/MAC | Displays the port number/IP address/MAC address of the entry. |
| Access Interface | Displays the access interface you set of the entry. |
| Operation | Here you can modify or delete the desired entry. |