T2600G/System Summary

Port Status

• Select a UNIT, and move your mouse to a port
• Then the type, speed and status of this port will be displayed

Appearance of the port indicates its current status

• Indicates the 1000M port is not connected to a device.
• Indicates the 1000M port is at the speed of 1000Mbps.
• Indicates the 1000M port is at the speed of 10Mbps or 100Mbps.
• Indicates the SFP port is not connected to a device.
• Indicates the SFP port is at the speed of 1000Mbps.
• Indicates the SFP port is at the speed of 100Mbps.

Bandwidth Utilization

Click a port and the bandwidth utilization will be displayed in the diagram.

System Info

You can view the system information of each UNIT. The displayed information options are as follows:

System Description

Displays the system description of the switch.

Device Name

Displays the name of the switch. You can edit it on the Device Description page.

Device Location

Displays the location of the switch. You can edit it on the Device Description page.

Contact Information

Displays the contact information of the switch. You can edit it on the Device Description page.

Hardware Version

Displays the hardware version of the switch.

Firmware Version

Displays the firmware version of the switch.

Boot Loader Version

Displays the Boot Loader Version of the switch.

MAC Address

Displays the MAC address of the switch.

System Time

Displays the system time of the switch.

Running Time

Displays the running time of the switch.

Serial Number

Displays the serial number of the switch.

Jumbo Frame

Displays whether Jumbo Frame is enabled. You can click Settings to jump to the Jumbo Frame configuration page.

SNTP

Displays whether the switch gets system time from NTP Server. You can click Settings to jump to the System Time configuration page.

IGMP Snooping

Displays whether IGMP Snooping is enabled. You can click Settings to jump to the IGMP Snooping configuration page.

SNMP

Displays whether SNMP is enabled. You can click Settings to jump to the SNMP configuration page.

Spanning Tree

   Displays whether Spanning Tree is enabled. You can click Settings to jump to the Spanning Tree configuration page.

DHCP Relay

   Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP Relay configuration page.

802.1x

   Displays whether 802.1x is enabled. You can click Settings to jump to the 802.1x configuration page.

HTTP Server

   Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP configuration page.

Telnet

   Displays whether Telnet is enabled. You can click Settings to jump to the Telnet configuration page.

SSH

   Displays whether SSH is enabled. You can click Settings to jump to the SSH configuration page.