T2600G/System Summary: Unterschied zwischen den Versionen
| Zeile 3: | Zeile 3: | ||
== Port Status == | == Port Status == | ||
; Appearance of the port indicates its current status | ; Appearance of the port indicates its current status | ||
{| class="wikitable sortable options" | {| class="wikitable sortable options" | ||
|- | |- | ||
! | ! Unix !! GNU !! Beschreibung | ||
|- | |- | ||
| 1000M || not connected | | || 1000M || not connected | ||
|- | |- | ||
| 1000M || 1000Mbps | | || 1000M || 1000Mbps | ||
|- | |- | ||
| 1000M || 10Mbps or 100Mbps | | || 1000M || 10Mbps or 100Mbps | ||
|- | |- | ||
| SFP || not connected | | || SFP || not connected | ||
|- | |- | ||
| SFP || 1000Mbps | | || SFP || 1000Mbps | ||
|- | |- | ||
| SFP || 100Mbps | | || SFP || 100Mbps | ||
|} | |} | ||
; Bandwidth Utilization | ; Bandwidth Utilization | ||
Version vom 15. Januar 2023, 12:04 Uhr
Port Status
- Appearance of the port indicates its current status
| Unix | GNU | Beschreibung |
|---|---|---|
| 1000M | not connected | |
| 1000M | 1000Mbps | |
| 1000M | 10Mbps or 100Mbps | |
| SFP | not connected | |
| SFP | 1000Mbps | |
| SFP | 100Mbps |
- Bandwidth Utilization
Click a port and the bandwidth utilization will be displayed in the diagram.
System Info
You can view the system information of each UNIT. The displayed information options are as follows:
- System Descriptiony
Displays the system description of the switch.
- Device Name
Displays the name of the switch. You can edit it on the Device Description page.
- Device Location
Displays the location of the switch. You can edit it on the Device Description page.
- Contact Information
Displays the contact information of the switch. You can edit it on the Device Description page.
- Hardware Version
Displays the hardware version of the switch.
- Firmware Version
Displays the firmware version of the switch.
- Boot Loader Version
Displays the Boot Loader Version of the switch.
- MAC Address
Displays the MAC address of the switch.
- System Time
Displays the system time of the switch.
- Running Time
Displays the running time of the switch.
- Serial Number
Displays the serial number of the switch.
- Jumbo Frame
Displays whether Jumbo Frame is enabled. You can click Settings to jump to the Jumbo Frame configuration page.
- SNTP
Displays whether the switch gets system time from NTP Server. You can click Settings to jump to the System Time configuration page.
- IGMP Snooping
Displays whether IGMP Snooping is enabled. You can click Settings to jump to the IGMP Snooping configuration page.
- SNMP
Displays whether SNMP is enabled. You can click Settings to jump to the SNMP configuration page.
Spanning Tree
Displays whether Spanning Tree is enabled. You can click Settings to jump to the Spanning Tree configuration page.
DHCP Relay
Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP Relay configuration page.
802.1x
Displays whether 802.1x is enabled. You can click Settings to jump to the 802.1x configuration page.
HTTP Server
Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP configuration page.
Telnet
Displays whether Telnet is enabled. You can click Settings to jump to the Telnet configuration page.
SSH
Displays whether SSH is enabled. You can click Settings to jump to the SSH configuration page.