T2600G/System Summary

Port Status

Symbol	Port	Beschreibung
	1000M	not connected
	1000M	1000Mbps
	1000M	10Mbps or 100Mbps
	SFP	not connected
	SFP	1000Mbps
	SFP	100Mbps

Bandwidth Utilization

• Click a port and the bandwidth utilization will be displayed in the diagram

System Info

You can view the system information of each UNIT. The displayed information options are as follows:

System Descriptiony

Displays the system description of the switch.

Device Name

Displays the name of the switch. You can edit it on the Device Description page.

Device Location

Displays the location of the switch. You can edit it on the Device Description page.

Contact Information

Displays the contact information of the switch. You can edit it on the Device Description page.

Hardware Version

Displays the hardware version of the switch.

Firmware Version

Displays the firmware version of the switch.

Boot Loader Version

Displays the Boot Loader Version of the switch.

MAC Address

Displays the MAC address of the switch.

System Time

Displays the system time of the switch.

Running Time

Displays the running time of the switch.

Serial Number

Displays the serial number of the switch.

Jumbo Frame

Displays whether Jumbo Frame is enabled. You can click Settings to jump to the Jumbo Frame configuration page.

SNTP

Displays whether the switch gets system time from NTP Server. You can click Settings to jump to the System Time configuration page.

IGMP Snooping

Displays whether IGMP Snooping is enabled. You can click Settings to jump to the IGMP Snooping configuration page.

SNMP

Displays whether SNMP is enabled. You can click Settings to jump to the SNMP configuration page.

Spanning Tree

Displays whether Spanning Tree is enabled. You can click Settings to jump to the Spanning Tree configuration page.

DHCP Relay

Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP Relay configuration page.

802.1x

Displays whether 802.1x is enabled. You can click Settings to jump to the 802.1x configuration page.

HTTP Server

Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP configuration page.

Telnet

Displays whether Telnet is enabled. You can click Settings to jump to the Telnet configuration page.

SSH

Displays whether SSH is enabled. You can click Settings to jump to the SSH configuration page.