Apache Debian Default Page: Unterschied zwischen den Versionen

Aus Foxwiki
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
Zeile 3: Zeile 3:
  It works!
  It works!
   
   
  This is the default welcome page used to test the correct                 operation of the Apache2 server after installation on Debian systems.               If you can read this page, it means that the Apache HTTP server installed at               this site is working properly. You should '''replace this file''' (located at               <code>/var/www/html/index.html</code>) before continuing to operate your HTTP server.
  This is the default welcome page used to test the correct operation of the Apache2 server after installation on Debian systems. If you can read this page, it means that the Apache HTTP server installed at this site is working properly. You should '''replace this file''' (located at <code>/var/www/html/index.html</code>) before continuing to operate your HTTP server.
   
   
  If you are a normal user of this web site and don't know what this page is               about, this probably means that the site is currently unavailable due to               maintenance.               If the problem persists, please contact the site's administrator.
  If you are a normal user of this web site and don't know what this page is about, this probably means that the site is currently unavailable due to maintenance. If the problem persists, please contact the site's administrator.
   
   
  Configuration Overview
  Configuration Overview
   
   
  Debian's Apache2 default configuration is different from the               upstream default configuration, and split into several files optimized for               interaction with Debian tools. The configuration system is               '''fully documented in               /usr/share/doc/apache2/README.Debian.gz'''. Refer to this for the full               documentation. Documentation for the web server itself can be               found by accessing the manual if the <code>apache2-doc</code>               package was installed on this server.
  Debian's Apache2 default configuration is different from the upstream default configuration, and split into several files optimized for interaction with Debian tools. The configuration system is '''fully documented in /usr/share/doc/apache2/README.Debian.gz'''. Refer to this for the full documentation. Documentation for the web server itself can be found by accessing the manual if the <code>apache2-doc</code> package was installed on this server.
   
   
  The configuration layout for an Apache2 web server installation on Debian systems is as follows:
  The configuration layout for an Apache2 web server installation on Debian systems is as follows:
  /etc/apache2/
/etc/apache2/
  |-- apache2.conf
|-- apache2.conf
  |       `-- ports.conf
| `-- ports.conf
  |-- mods-enabled
|-- mods-enabled
  |       |-- *.load
| |-- *.load
  |       `-- *.conf
| `-- *.conf
  |-- conf-enabled
|-- conf-enabled
  |       `-- *.conf
| `-- *.conf
  |-- sites-enabled
|-- sites-enabled
  |       `-- *.conf
| `-- *.conf
         
  * <code>apache2.conf</code> is the main configuration                           file. It puts the pieces together by including all remaining configuration                           files when starting up the web server.
  * <code>apache2.conf</code> is the main configuration file. It puts the pieces together by including all remaining configuration files when starting up the web server.
  * <code>ports.conf</code> is always included from the                           main configuration file. It is used to determine the listening ports for                           incoming connections, and this file can be customized anytime.
  * <code>ports.conf</code> is always included from the main configuration file. It is used to determine the listening ports for incoming connections, and this file can be customized anytime.
  * Configuration files in the <code>mods-enabled/</code>,                           <code>conf-enabled/</code> and <code>sites-enabled/</code> directories contain                           particular configuration snippets which manage modules, global configuration                           fragments, or virtual host configurations, respectively.
  * Configuration files in the <code>mods-enabled/</code>, <code>conf-enabled/</code> and <code>sites-enabled/</code> directories contain particular configuration snippets which manage modules, global configuration fragments, or virtual host configurations, respectively.
  * They are activated by symlinking available                           configuration files from their respective                           *-available/ counterparts. These should be managed                           by using our helpers                                                           <code>a2enmod,                               a2dismod,</code>                                                                                     <code>a2ensite,                               a2dissite,</code>                                                           and                                                           <code>a2enconf,                               a2disconf</code>                           . See their respective man pages for detailed information.
  * They are activated by symlinking available configuration files from their respective *-available/ counterparts. These should be managed by using our helpers <code>a2enmod, a2dismod,</code> <code>a2ensite, a2dissite,</code> and <code>a2enconf, a2disconf</code> . See their respective man pages for detailed information.
  * The binary is called apache2. Due to the use of                           environment variables, in the default configuration, apache2 needs to be                           started/stopped with <code>/etc/init.d/apache2</code> or <code>apache2ctl</code>.                           '''Calling <code>/usr/bin/apache2</code> directly will not work''' with the                           default configuration.Document Roots
  * The binary is called apache2. Due to the use of environment variables, in the default configuration, apache2 needs to be started/stopped with <code>/etc/init.d/apache2</code> or <code>apache2ctl</code>. '''Calling <code>/usr/bin/apache2</code> directly will not work''' with the default configuration.Document Roots
  By default, Debian does not allow access through the web browser to               ''any'' file apart of those located in <code>/var/www</code>,               public_html               directories (when enabled) and <code>/usr/share</code> (for web               applications). If your site is using a web document root               located elsewhere (such as in <code>/srv</code>) you may need to whitelist your               document root directory in <code>/etc/apache2/apache2.conf</code>.
  By default, Debian does not allow access through the web browser to ''any'' file apart of those located in <code>/var/www</code>, public_html directories (when enabled) and <code>/usr/share</code> (for web applications). If your site is using a web document root located elsewhere (such as in <code>/srv</code>) you may need to whitelist your document root directory in <code>/etc/apache2/apache2.conf</code>.


  The default Debian document root is <code>/var/www/html</code>. You               can make your own virtual hosts under /var/www. This is different               to previous releases which provides better security out of the box.
  The default Debian document root is <code>/var/www/html</code>. You can make your own virtual hosts under /var/www. This is different to previous releases which provides better security out of the box.
  Reporting Problems
  Reporting Problems
  Please use the <code>reportbug</code> tool to report bugs in the               Apache2 package with Debian. However, check existing bug reports before reporting a new bug.
  Please use the <code>reportbug</code> tool to report bugs in the Apache2 package with Debian. However, check existing bug reports before reporting a new bug.


  Please report bugs specific to modules (such as PHP and others)               to respective packages, not to the web server itself.
  Please report bugs specific to modules (such as PHP and others) to respective packages, not to the web server itself.
[[Kategorie:Apache2]]
[[Kategorie:Apache2]]

Version vom 3. November 2024, 12:39 Uhr

Apache2 Debian Default Page

It works!

This is the default welcome page used to test the correct operation of the Apache2 server after installation on Debian systems. If you can read this page, it means that the Apache HTTP server installed at this site is working properly. You should replace this file (located at /var/www/html/index.html) before continuing to operate your HTTP server.

If you are a normal user of this web site and don't know what this page is about, this probably means that the site is currently unavailable due to maintenance. If the problem persists, please contact the site's administrator.

Configuration Overview

Debian's Apache2 default configuration is different from the upstream default configuration, and split into several files optimized for interaction with Debian tools. The configuration system is fully documented in /usr/share/doc/apache2/README.Debian.gz. Refer to this for the full documentation. Documentation for the web server itself can be found by accessing the manual if the apache2-doc package was installed on this server.

The configuration layout for an Apache2 web server installation on Debian systems is as follows:
/etc/apache2/
|-- apache2.conf
| `-- ports.conf
|-- mods-enabled
| |-- *.load
| `-- *.conf
|-- conf-enabled
| `-- *.conf
|-- sites-enabled
| `-- *.conf

* apache2.conf is the main configuration file. It puts the pieces together by including all remaining configuration files when starting up the web server.
* ports.conf is always included from the main configuration file. It is used to determine the listening ports for incoming connections, and this file can be customized anytime.
* Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ directories contain particular configuration snippets which manage modules, global configuration fragments, or virtual host configurations, respectively.
* They are activated by symlinking available configuration files from their respective *-available/ counterparts. These should be managed by using our helpers a2enmod, a2dismod, a2ensite, a2dissite, and a2enconf, a2disconf . See their respective man pages for detailed information.
* The binary is called apache2. Due to the use of environment variables, in the default configuration, apache2 needs to be started/stopped with /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not work with the default configuration.Document Roots
By default, Debian does not allow access through the web browser to any file apart of those located in /var/www, public_html directories (when enabled) and /usr/share (for web applications). If your site is using a web document root located elsewhere (such as in /srv) you may need to whitelist your document root directory in /etc/apache2/apache2.conf.
The default Debian document root is /var/www/html. You can make your own virtual hosts under /var/www. This is different to previous releases which provides better security out of the box.
Reporting Problems
Please use the reportbug tool to report bugs in the Apache2 package with Debian. However, check existing bug reports before reporting a new bug.
Please report bugs specific to modules (such as PHP and others) to respective packages, not to the web server itself.