Tree

tree listed den Inhalt von Verzeichnissen als Baum auf

Beschreibung

Tree is a recursive directory listing program that produces a depth indented listing of files, which is colorized ala dircolors if the LS_COLORS environment variable is set and output is to tty.

• With no arguments, tree lists the files in the current directory.
• When directory arguments are given, tree lists all the files and/or directories found in the given directories each in turn.
• Upon completion of listing all files/directories found, tree returns the total number of files and/or directories listed.

By default, when a symbolic link is encountered, the path that the symbolic link refers to is printed after the name of the link in the format:

name -> real-path

If the `-l' option is given and the symbolic link refers to an actual directory, then tree will follow the path of the symbolic link as if it were a real directory.

Installation

1. apt install tree

Syntax

tree [-acdfghilnpqrstuvxACDFJQNSUX] [-L level [-R]] [-H baseHREF] [-T title] [-o filename] [-P pattern] [-I pattern] [--gitignore] [--matchdirs] [--metafirst] [--ignore-case] [--nolinks] [--inodes] [--device] [--sort[=]name] [--dirsfirst] [--filesfirst] [--filelimit #] [--si] [--du] [--prune] [--timefmt[=]format] [--fromfile] [--info] [--noreport] [--version] [--help] [--] [directory ...]

Syntax

Optionen

LISTING OPTIONS

-a All files are printed.

• By default tree does not print hidden files (those beginning with a dot `.').
• In no event does tree print the file system constructs `.' (current directory) and `..' (previous directory).

-d List directories only.

-l Follows symbolic links if they point to directories, as if they were directories.

• Symbolic links that will result in recursion are avoided when detected.

-f Prints the full path prefix for each file.

-x Stay on the current file-system only.

• Ala find -xdev.

-L level

Max display depth of the directory tree.

-R Recursively cross down the tree each level directories (see -L option), and at each of them execute tree again adding `-o 00Tree.html' as a new option.

-P pattern

List only those files that match the wild-card pattern. 

• You may have multiple -P options.
• Note: you must use the -a option to also consider those files beginning with a dot `.' for matching.
• Valid wildcard operators are `*' (any zero or more characters), `**` (any zero or more characters as well as null /'s, i.e. /**/ may match a single /), `?' (any single character), `[...]' (any single character listed between brackets (optional - (dash) for character range may be used: ex: [A-Z]), and `[^...]' (any single character not listed in brackets) and `|' separates alternate patterns.
• A '/' at the end of the pattern matches directories, but not files.

-I pattern

Do not list those files that match the wild-card pattern. 

• You may have multiple -I options.
• See -P above for information on wildcard patterns.

--gitignore

Uses git .gitignore files for filtering files and directories. 

• Also uses $GIT_DIR/info/exclude if present.

--ignore-case

If a match pattern is specified by the -P or -I option, this will cause the pattern to match without regards to the case of each letter.

--matchdirs

If a match pattern is specified by the -P option, this will cause the pattern to be applied to directory names (in addition to filenames). 

• In the event of a match on the directory name, matching is disabled for the directory's contents.
• If the --prune op‐

tion is used, empty folders that match the pattern will not be pruned.

--metafirst

Print the meta-data information at the beginning of the line rather than after the indentation lines.

--prune

Makes tree prune empty directories from the output, useful when used in conjunction with -P or -I. 

• See BUGS AND NOTES below for more information on this option.

--info Prints file comments found in .info files.

• See .INFO FILES below for more information on the format of .info files.

--noreport Omits printing of the file and directory report at the end of the tree listing.

--charset charset Set the character set to use when outputting HTML and for line drawing.

--filelimit # Do not descend directories that contain more than # entries.

--timefmt format Prints (implies -D) and formats the date according to the format string which uses the strftime(3) syntax.

-o filename Send output to filename.

FILE OPTIONS

-q Print non-printable characters in filenames as question marks instead of the default.

-N Print non-printable characters as is instead of as escaped octal numbers.

-Q Quote the names of files in double quotes.

-p Print the file type and permissions for each file (as per ls -l).

-u Print the username, or UID # if no username is available, of the file.

-g Print the group name, or GID # if no group name is available, of the file.

-s Print the size of each file in bytes along with the name.

-h Print the size of each file but in a more human readable way, e.g.

• appending a size letter for kilobytes (K), megabytes (M), gigabytes (G), terabytes (T), petabytes (P) and exabytes (E).

--si Like -h but use SI units (powers of 1000) instead.

--du For each directory report its size as the accumulation of sizes of all its files and sub-directories (and their files, and so on).

• The total amount of used space is also given in the final report (like the 'du -c' command.) This option requires tree to read the entire directory tree before emitting it, see BUGS AND NOTES below.
• Implies -s.

-D Print the date of the last modification time or if -c is used, the last status change time for the file listed.

-F Append a `/' for directories, a `=' for socket files, a `*' for executable files, a `>' for doors (Solaris) and a `|' for FIFO's, as per ls -F

--inodes Prints the inode number of the file or directory

--device Prints the device number to which the file or directory belongs

SORTING OPTIONS

-v Sort the output by version.

-t Sort the output by last modification time instead of alphabetically.

-c Sort the output by last status change instead of alphabetically.

• Modifies the -D option (if used) to print the last status change instead of modification time.

-U Do not sort.

• Lists files in directory order.
• Disables --dirsfirst.

-r Sort the output in reverse order.

• This is a meta-sort that alter the above sorts.
• This option is disabled when -U is used.

--dirsfirst List directories before files.

• This is a meta-sort that alters the above sorts.
• This option is disabled when -U is used.

--filesfirst List files before directories.

• This is a meta-sort that alters the above sorts.
• This option is disabled when -U is used.

--sort[=]type Sort the output by type instead of name.

• Possible values are: ctime (-c), mtime (-t), size, or version (-v).

GRAPHICS OPTIONS

-i Makes tree not print the indentation lines, useful when used in conjunction with the -f

option. 

• Also removes as much whitespace as possible when used with the -J or -x op‐

tions.

-A Turn on ANSI line graphics hack when printing the indentation lines.

-S Turn on CP437 line graphics (useful when using Linux console mode fonts).

• This option

is now equivalent to `--charset=IBM437' and may eventually be depreciated.

-n Turn colorization off always, over-ridden by the -C option, however overrides CLI‐

COLOR_FORCE if present.

-C Turn colorization on always, using built-in color defaults if the LS_COLORS or

TREE_COLORS environment variables are not set. 

• Useful to colorize output to a pipe.

XML/JSON/HTML OPTIONS

-X Turn on XML output.

• Outputs the directory tree as an XML formatted file.

-J Turn on JSON output.

• Outputs the directory tree as a JSON formatted array.

-H baseHREF || Turn on HTML output, including HTTP references.

• Useful for ftp sites.
• baseHREF gives the base ftp location when using HTML output.
• That is, the local directory may be `/local/ftp/pub', but it must be referenced as ftp://hostname.organization.domain/pub' (baseHREF should be `ftp://hostname.organization.domain').
• Hint: don't use ANSI lines with this option, and don't give more than one directory in the directory list.
• If you

wish to use colors via CSS style-sheet, use the -C option in addition to this option to  force color output.

-T title

Sets the title and H1 header string in HTML output mode.

--nolinks

Turns off hyperlinks in HTML output.

INPUT OPTIONS

--fromfile Reads a directory listing from a file rather than the file-system.

• Paths provided

on the command line are files to read from rather than directories to search.

• The dot (.) di‐

rectory indicates that tree should read paths from standard input.

• NOTE: this is only suitable

for reading the output of a program such as find, not 'tree -fi' as symlinks cannot (at least as yet) be distinguished from files that simply contain ' -> ' as part of the filename.

MISC OPTIONS

--help Outputs a verbose usage listing.

--version

Outputs the version of tree.

-- Option processing terminator.

• No further options will be processed after this.

.INFO FILES .info files are similiar to .gitignore files, if a .info file is found while scanning a direc‐ tory it is read and added to a stack of .info information.

• Each file is composed of comments

(lines starting with hash marks (#),) or wild-card patterns which may match a file relative to the directory the .info file is found in.

• If a file should match a pattern, the tab indented

comment that follows the pattern is used as the file comment.

• A comment is terminated by a

non-tab indented line.

• Multiple patterns, each to a line, may share the same comment.

ENVIRONMENT LS_COLORS Color information created by dircolors TREE_COLORS Uses this for color information over LS_COLORS if it is set. TREE_CHARSET Character set for tree to use in HTML mode. CLICOLOR Enables colorization even if TREE_COLORS or LS_COLORS is not set. CLICOLOR_FORCE Always enables colorization (effectively -C) LC_CTYPE Locale for filename output. LC_TIME Locale for timefmt output, see strftime(3). TZ Timezone for timefmt output, see strftime(3). STDDATA_FD Enable the stddata feature, optionally set descriptor to use.

BUGS AND NOTES Tree does not prune "empty" directories when the -P and -I options are used by default.

• Use

the --prune option.

The -h and --si options round to the nearest whole number unlike the ls implementations which rounds up always.

Pruning files and directories with the -I, -P and --filelimit options will lead to incorrect file/directory count reports.

The --prune and --du options cause tree to accumulate the entire tree in memory before emit‐ ting it.

• For large directory trees this can cause a significant delay in output and the use of

large amounts of memory.

The timefmt expansion buffer is limited to a ridiculously large 255 characters.

• Output of

time strings longer than this will be undefined, but are guaranteed to not exceed 255 charac‐ ters.

XML/JSON trees are not colored, which is a bit of a shame.

Probably more.

As of version 2.0.0, in Linux, tree will attempt to automatically output a compact JSON tree on file descriptor 3 (what I call stddata,) if present and the environment variable STDDATA_FD is defined or set to a positive non-zero file descriptor value to use to output on. It is hoped that some day a better Linux/Unix shell may take advantage of this feature, though BSON would probably be a better format for this.

Links

Dateien

• /etc/DIR_COLORS System color database
• ~/.dircolors Users color database.
• .gitignore Git exclusion file
• $GIT_DIR/info/exclude Global git file exclusion list
• .info File comment file
• /usr/share/finfo/global_info Global file comment file

Man-Pages

1. dircolors(1)
2. ls(1)
3. find(1)
4. du(1)
5. strftime(3)
6. gitignore(5)

Kontrollfragen

Testfrage 1

Antwort1

Testfrage 2

Antwort2

Testfrage 3

Antwort3

Testfrage 4

Antwort4

Testfrage 5

Antwort5