T2600G/System Summary: Unterschied zwischen den Versionen

Version vom 15. Januar 2023, 12:12 Uhr

Port Status

Symbol	Port	Beschreibung
	1000M	not connected
	1000M	1000Mbps
	1000M	10Mbps or 100Mbps
	SFP	not connected
	SFP	1000Mbps
	SFP	100Mbps

Bandwidth Utilization

Click a port and the bandwidth utilization will be displayed in the diagram

System Info

You can view the system information of each UNIT The displayed information options are as follows:

Option	Beschreibung
System Descriptiony	Displays the system description of the switch
Device Name	Displays the name of the switch You can edit it on the Device Description page
Device Location	Displays the location of the switch You can edit it on the Device Description page
Contact Information	Displays the contact information of the switch You can edit it on the Device Description page
Hardware Version	Displays the hardware version of the switch
Firmware Version	Displays the firmware version of the switch
Boot Loader Version	Displays the Boot Loader Version of the switch
MAC Address	Displays the MAC address of the switch
System Time	Displays the system time of the switch
Running Time	Displays the running time of the switch
Serial Number	Displays the serial number of the switch
Jumbo Frame	Displays whether Jumbo Frame is enabled You can click Settings to jump to the Jumbo Frame configuration page
SNTP	Displays whether the switch gets system time from NTP Server You can click Settings to jump to the System Time configuration page
IGMP Snooping	Displays whether IGMP Snooping is enabled You can click Settings to jump to the IGMP Snooping configuration page
SNMP	Displays whether SNMP is enabled You can click Settings to jump to the SNMP configuration page
Spanning Tree	Displays whether Spanning Tree is enabled You can click Settings to jump to the Spanning Tree configuration page
DHCP Relay	Displays whether DHCP Relay is enabled You can click Settings to jump to the DHCP Relay configuration page
8021x	Displays whether 8021x is enabled You can click Settings to jump to the 8021x configuration page
HTTP Server	Displays whether HTTP server is enabled You can click Settings to jump to the HTTP configuration page
Telnet	Displays whether Telnet is enabled You can click Settings to jump to the Telnet configuration page
SSH	Displays whether SSH is enabled You can click Settings to jump to the SSH configuration page

@@ Zeile 23: / Zeile 23: @@
 == System Info ==
-You can view the system information of each UNIT. The displayed information options are as follows:
+You can view the system information of each UNIT The displayed information options are as follows:
-; System Descriptiony
+{| class="wikitable sortable options"
-Displays the system description of the switch.
+|-
+! Option !! Beschreibung
-; Device Name
+|-
-Displays the name of the switch. You can edit it on the Device Description page.
+| System Descriptiony || Displays the system description of the switch
+|-
-; Device Location
+| Device Name || Displays the name of the switch You can edit it on the Device Description page
-Displays the location of the switch. You can edit it on the Device Description page.
+|-
+| Device Location || Displays the location of the switch You can edit it on the Device Description page
-; Contact Information
+|-
-Displays the contact information of the switch. You can edit it on the Device Description page.
+| Contact Information || Displays the contact information of the switch You can edit it on the Device Description page
+|-
-; Hardware Version
+| Hardware Version || Displays the hardware version of the switch
-Displays the hardware version of the switch.
+|-
+| Firmware Version || Displays the firmware version of the switch
-; Firmware Version
+|-
-Displays the firmware version of the switch.
+| Boot Loader Version || Displays the Boot Loader Version of the switch
+|-
-; Boot Loader Version
+| MAC Address || Displays the MAC address of the switch
-Displays the Boot Loader Version of the switch.
+|-
+| System Time || Displays the system time of the switch
-; MAC Address
+|-
-Displays the MAC address of the switch.
+| Running Time || Displays the running time of the switch
+|-
-; System Time
+| Serial Number || Displays the serial number of the switch
-Displays the system time of the switch.
+|-
+| Jumbo Frame || Displays whether Jumbo Frame is enabled You can click Settings to jump to the Jumbo Frame configuration page
-; Running Time
+|-
-Displays the running time of the switch.
+| SNTP || Displays whether the switch gets system time from NTP Server You can click Settings to jump to the System Time configuration page
+|-
-; Serial Number
+| IGMP Snooping || Displays whether IGMP Snooping is enabled You can click Settings to jump to the IGMP Snooping configuration page
-Displays the serial number of the switch.
+|-
+| SNMP || Displays whether SNMP is enabled You can click Settings to jump to the SNMP configuration page
-; Jumbo Frame
+|-
-Displays whether Jumbo Frame is enabled. You can click Settings to jump to the Jumbo Frame configuration page.
+| Spanning Tree || Displays whether Spanning Tree is enabled You can click Settings to jump to the Spanning Tree configuration page
+|-
-; SNTP
+| DHCP Relay || Displays whether DHCP Relay is enabled You can click Settings to jump to the DHCP Relay configuration page
-Displays whether the switch gets system time from NTP Server. You can click Settings to jump to the System Time configuration page.
+|-
+| 8021x || Displays whether 8021x is enabled You can click Settings to jump to the 8021x configuration page
-; IGMP Snooping
+|-
-Displays whether IGMP Snooping is enabled. You can click Settings to jump to the IGMP Snooping configuration page.
+| HTTP Server || Displays whether HTTP server is enabled You can click Settings to jump to the HTTP configuration page
+|-
-; SNMP
+| Telnet || Displays whether Telnet is enabled You can click Settings to jump to the Telnet configuration page
-Displays whether SNMP is enabled. You can click Settings to jump to the SNMP configuration page.
+|-
+| SSH || Displays whether SSH is enabled You can click Settings to jump to the SSH configuration page
-; Spanning Tree
+|}
-Displays whether Spanning Tree is enabled. You can click Settings to jump to the Spanning Tree configuration page.
-; DHCP Relay
-Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP Relay configuration page.
-; 802.1x
-Displays whether 802.1x is enabled. You can click Settings to jump to the 802.1x configuration page.
-; HTTP Server
-Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP configuration page.
-; Telnet
-Displays whether Telnet is enabled. You can click Settings to jump to the Telnet configuration page.
-; SSH
-Displays whether SSH is enabled. You can click Settings to jump to the SSH configuration page.
 [[Kategorie:T2600G:SystemInfo]]