T2600G/System Summary

Port Status

Symbol	Port	Beschreibung
	1000M	not connected
	1000M	1000Mbps
	1000M	10Mbps or 100Mbps
	SFP	not connected
	SFP	1000Mbps
	SFP	100Mbps

Bandwidth Utilization

• Click a port and the bandwidth utilization will be displayed in the diagram

System Info

You can view the system information of each UNIT The displayed information options are as follows:

Option	Beschreibung
System Descriptiony	Displays the system description of the switch
Device Name	Displays the name of the switch You can edit it on the Device Description page
Device Location	Displays the location of the switch You can edit it on the Device Description page
Contact Information	Displays the contact information of the switch You can edit it on the Device Description page
Hardware Version	Displays the hardware version of the switch
Firmware Version	Displays the firmware version of the switch
Boot Loader Version	Displays the Boot Loader Version of the switch
MAC Address	Displays the MAC address of the switch
System Time	Displays the system time of the switch
Running Time	Displays the running time of the switch
Serial Number	Displays the serial number of the switch
Jumbo Frame	Displays whether Jumbo Frame is enabled You can click Settings to jump to the Jumbo Frame configuration page
SNTP	Displays whether the switch gets system time from NTP Server You can click Settings to jump to the System Time configuration page
IGMP Snooping	Displays whether IGMP Snooping is enabled You can click Settings to jump to the IGMP Snooping configuration page
SNMP	Displays whether SNMP is enabled You can click Settings to jump to the SNMP configuration page
Spanning Tree	Displays whether Spanning Tree is enabled You can click Settings to jump to the Spanning Tree configuration page
DHCP Relay	Displays whether DHCP Relay is enabled You can click Settings to jump to the DHCP Relay configuration page
8021x	Displays whether 8021x is enabled You can click Settings to jump to the 8021x configuration page
HTTP Server	Displays whether HTTP server is enabled You can click Settings to jump to the HTTP configuration page
Telnet	Displays whether Telnet is enabled You can click Settings to jump to the Telnet configuration page
SSH	Displays whether SSH is enabled You can click Settings to jump to the SSH configuration page