Greenbone/Anwendung: Unterschied zwischen den Versionen

Aus Foxwiki
K Dirkwagner verschob die Seite Greenbone Security Manager/Anwendung nach Greenbone/Anwendung, ohne dabei eine Weiterleitung anzulegen: Textersetzung - „Greenbone Security Manager“ durch „Greenbone“
Keine Bearbeitungszusammenfassung
Zeile 1: Zeile 1:
== Anwendungen ==
== First Scan ==
=== First Scan ===
Now it’s time to run our first scan.
Now it’s time to run our first scan.


Zeile 15: Zeile 14:
This and more will be covered in the next article for OpenVAS, which is coming soon.
This and more will be covered in the next article for OpenVAS, which is coming soon.


=== Configuration for a new target ===
== Configuration for a new target ==
Begin by navigating to Scans > Tasks and clicking on the purple magic wand icon to begin the basic configuration wizard. After successfully navigating to the wizard, you should see a pop-up window similar to the one shown above. You can set up the initial scan of the local host here to make sure everything is set up correctly.
Begin by navigating to Scans > Tasks and clicking on the purple magic wand icon to begin the basic configuration wizard. After successfully navigating to the wizard, you should see a pop-up window similar to the one shown above. You can set up the initial scan of the local host here to make sure everything is set up correctly.


Zeile 23: Zeile 22:
Now that we know everything is normal, we can take a closer look at OpenVAS and how it works. Expand the car to''' scan and> start the task''' of creating a scan task for the managed computer.
Now that we know everything is normal, we can take a closer look at OpenVAS and how it works. Expand the car to''' scan and> start the task''' of creating a scan task for the managed computer.


==== Creating a Task ====
=== Creating a Task ===
To create a custom task, navigate to the star icon in the upper right corner of the taskbar and select New task.
To create a custom task, navigate to the star icon in the upper right corner of the taskbar and select New task.


Zeile 34: Zeile 33:
# '''Scan Config''': OpenVAS has seven totally different scan sorts you can choose from and can be used supported however you’re aggressive or what info you wish to gather from your scan.
# '''Scan Config''': OpenVAS has seven totally different scan sorts you can choose from and can be used supported however you’re aggressive or what info you wish to gather from your scan.


==== Scoping a New Target ====
=== Scoping a New Target ===
To scope a new target, navigate to the star icon next to Scan Targets.
To scope a new target, navigate to the star icon next to Scan Targets.


Zeile 41: Zeile 40:
Now that we’ve got our target scoped we are able to still produce our task and start the scan. When the task is created, you’ll come to the scanning management panel, wherever you’ll track and execute the task. To run the task, navigate to the run icon within the operation.
Now that we’ve got our target scoped we are able to still produce our task and start the scan. When the task is created, you’ll come to the scanning management panel, wherever you’ll track and execute the task. To run the task, navigate to the run icon within the operation.


=== Assets ===
== Assets ==
It permits visualizing the vulnerability of the parts akin to hosts or in operation systems:  
It permits visualizing the vulnerability of the parts akin to hosts or in operation systems:  


=== Additional features ===
== Additional features ==
Allow adding common parameters to OpenVAS:
Allow adding common parameters to OpenVAS:


=== Administration ===
== Administration ==
As the name suggests, you can manage passwords, users, etc.:
As the name suggests, you can manage passwords, users, etc.:




[[Kategorie:Greenbone]]
[[Kategorie:Greenbone]]

Version vom 10. Februar 2023, 10:30 Uhr

First Scan

Now it’s time to run our first scan.

As this is just the installation part I won’t go into details, but I will show you quickly how to run your first scan. There will be more articles covering OpenVAS and we will continue looking into all of the different options we have and how to process scan results.

So the easiest way is simply to Navigate to Scans / Tasks and click on the little Magic Wand icon and start the Task Wizard.

"Install OpenVAS on Kali Linux"

Now you can enter either a single IP, a whole subnet, a range of IP Addresses, or a domain.

This will start a default-depth scan. Depending on the scale of the Network you want to scan this can take from a few minutes up to several hours or even days if the network is large enough and you choose a deep scan.

This and more will be covered in the next article for OpenVAS, which is coming soon.

Configuration for a new target

Begin by navigating to Scans > Tasks and clicking on the purple magic wand icon to begin the basic configuration wizard. After successfully navigating to the wizard, you should see a pop-up window similar to the one shown above. You can set up the initial scan of the local host here to make sure everything is set up correctly.

Scanning may take a while. Please allow OpenVAS enough time to complete the scan. You will then see a new dashboard for monitoring and analyzing your completed and ongoing scans, as shown below.

Schedule the scanning process

Now that we know everything is normal, we can take a closer look at OpenVAS and how it works. Expand the car to scan and> start the task of creating a scan task for the managed computer.

Creating a Task

To create a custom task, navigate to the star icon in the upper right corner of the taskbar and select New task.

After selecting ” New Task” from the drop-down menu, you will see a large pop-up window with many options. We will introduce each option part and its purpose.

For this task, we’ll be specializing only in the Name, Scan Targets, and Scanner Type, and Scan Config. In later tasks, we will be focusing on the opposite choices for additional advanced configuration and implementation/automation.

  1. Name: permits North American country to line the name the scan are going to be referred to as inside OpenVAS
  2. Scan Targets: The targets to scan, can embrace Hosts, Ports, and Credentials. to make a brand new target you may follow another pop-up, this can be lined later during this task.
  3. Scanner: The scanner to use by default will use the OpenVAS design but you’ll be able to set this to any scanner of your selecting within the settings menu.
  4. Scan Config: OpenVAS has seven totally different scan sorts you can choose from and can be used supported however you’re aggressive or what info you wish to gather from your scan.

Scoping a New Target

To scope a new target, navigate to the star icon next to Scan Targets.

Above is that the menu for configuring a replacement target. the 2 main choices you may have to be compelled to assemble are the Name and therefore the Hosts. This procedure is fairly uncomplicated and different options will solely be employed in advanced vulnerability management solutions. These are going to be lined in later tasks.

Now that we’ve got our target scoped we are able to still produce our task and start the scan. When the task is created, you’ll come to the scanning management panel, wherever you’ll track and execute the task. To run the task, navigate to the run icon within the operation.

Assets

It permits visualizing the vulnerability of the parts akin to hosts or in operation systems:  

Additional features

Allow adding common parameters to OpenVAS:

Administration

As the name suggests, you can manage passwords, users, etc.: