Nextcloud/occ
Nextcloud’s occ command (origins from “ownCloud Console”) is Nextcloud’s command-line interface. You can perform many common server operations with occ, such as installing and upgrading Nextcloud, manage users, encryption, passwords, LDAP setting, and more.
occ is in the nextcloud/ directory; for example /var/www/nextcloud on Ubuntu Linux. occ is a PHP script. You must run it as your HTTP user to ensure that the correct permissions are maintained on your Nextcloud files and directories.
Run occ as your HTTP user
The HTTP user is different on the various Linux distributions:* The HTTP user and group in Debian/Ubuntu is www-data.
- The HTTP user and group in Fedora/CentOS is apache.
- The HTTP user and group in Arch Linux is http.
- The HTTP user in openSUSE is wwwrun, and the HTTP group is www.
If your HTTP server is configured to use a different PHP version than the default (/usr/bin/php), occ should be run with the same version. For example, in CentOS 6.5 with SCL-PHP70 installed, the command looks like this:
sudo -u apache /opt/rh/php70/root/usr/bin/php /var/www/html/nextcloud/occ
- Note
Although the following examples make use of the sudo -u ... /path/to/php /path/to/occ method, your environment may require use of a different wrapper utility than sudo to execute the command as the appropriate user. Other common wrappers:
- su --command '/path/to/php ...' username – Note here that the target user specification comes at the end, and the command to execute is specified first.
- runuser --user username -- /path/to/php ... – This wrapper might be used in container contexts (ex: Docker / arm32v7/nextcloud) where both sudo and su wrapper utilities cannot be used.
Running occ with no options lists all commands and options, like this example on Ubuntu:
sudo -u www-data php occ Nextcloud version 19.0.0
Usage:
command [options] [arguments]
Options:
-h, --help Display this help message
-q, --quiet Do not output any message
-V, --version Display this application version
--ansi Force ANSI output
--no-ansi Disable ANSI output
-n, --no-interaction Do not ask any interactive question
--no-warnings Skip global warnings, show command output only
-v|vv|vvv, --verbose Increase the verbosity of messages: 1 for normal output,
2 for more verbose output and 3 for debug
Available commands:
check check dependencies of the server
environment
help Displays help for a command
list Lists commands
status show some status information
upgrade run upgrade routines after installation of
a new release. The release has to be
installed before.
This is the same as sudo -u www-data php occ list.
Run it with the -h option for syntax help:
sudo -u www-data php occ -h
Display your Nextcloud version:
sudo -u www-data php occ -V Nextcloud version 19.0.0
Query your Nextcloud server status:
sudo -u www-data php occ status - installed: true - version: 19.0.0.12 - versionstring: 19.0.0 - edition:
occ has options, commands, and arguments. Options and arguments are optional, while commands are required. The syntax is:
occ [options] command [arguments]
Get detailed information on individual commands with the help command, like this example for the maintenance:mode command:
sudo -u www-data php occ help maintenance:mode Usage: maintenance:mode [options]
Options:
--on enable maintenance mode
--off disable maintenance mode
-h, --help Display this help message
-q, --quiet Do not output any message
-V, --version Display this application version
--ansi Force ANSI output
--no-ansi Disable ANSI output
-n, --no-interaction Do not ask any interactive question
--no-warnings Skip global warnings, show command output only
-v|vv|vvv, --verbose Increase the verbosity of messages: 1 for normal output,
2 for more verbose output and 3 for debug
The status command from above has an option to define the output format. The default is plain text, but it can also be json:
sudo -u www-data php occ status --output=json
{"installed":true,"version":"19.0.0.9","versionstring":"19.0.0","edition":""}
or json_pretty:
sudo -u www-data php occ status --output=json_pretty
{
"installed": true,
"version": "19.0.0.12",
"versionstring": "19.0.0",
"edition": ""
}
This output option is available on all list and list-like commands: status, check, app:list, config:list, encryption:status and encryption:list-modules
Enabling autocompletion
- Note
Command autocompletion currently only works if the user you use to execute the occ commands has a profile. www-data in most cases is nologon and therefor cannot use this feature.
Autocompletion is available for bash (and bash based consoles). To enable it, you have to run one of the following commands:
# BASH ~4.x, ZSH source <(/var/www/html/nextcloud/occ _completion --generate-hook)
# BASH ~3.x, ZSH /var/www/html/nextcloud/occ _completion --generate-hook | source /dev/stdin
# BASH (any version) eval $(/var/www/html/nextcloud/occ _completion --generate-hook)
This will allow you to use autocompletion with the full path /var/www/html/nextcloud/occ <tab>.
If you also want to use autocompletion on occ from within the directory without using the full path, you need to specify --program occ after the --generate-hook.
If you want the completion to apply automatically for all new shell sessions, add the command to your shell’s profile (eg. ~/.bash_profile or ~/.zshrc).
Apps commands
The app commands list, enable, and disable apps:
app
app:install install selected app app:disable disable an app app:enable enable an app app:getpath get an absolute path to the app directory app:list list all available apps app:update update an app or all apps app:remove disable and remove an app
Download and install an app:
sudo -u www-data php occ app:install twofactor_totp
Install but don’t enable:
sudo -u www-data php occ app:install --keep-disabled twofactor_totp
List all of your installed apps, and show whether they are enabled or disabled:
sudo -u www-data php occ app:list
Enable an app, for example the External Storage Support app:
sudo -u www-data php occ app:enable files_external files_external enabled
Disable an app:
sudo -u www-data php occ app:disable files_external files_external disabled
You can get the full filepath to an app:
sudo -u www-data php occ app:getpath notifications /var/www/nextcloud/apps/notifications
To update an app, for instance Contacts:
sudo -u www-data php occ app:update contacts
To update all apps:
sudo -u www-data php occ app:update --all
Background jobs selector
Use the background command to select which scheduler you want to use for controlling background jobs, Ajax, Webcron, or Cron. This is the same as using the Cron section on your Nextcloud Admin page:
background
background:ajax Use ajax to run background jobs background:cron Use cron to run background jobs background:webcron Use webcron to run background jobs
This example selects Ajax:
sudo -u www-data php occ background:ajax
Set mode for background jobs to 'ajax'
The other two commands are:* background:cron
- background:webcron
See Background jobs to learn more.
Config commands
The config commands are used to configure the Nextcloud server:
config
config:app:delete Delete an app config value config:app:get Get an app config value config:app:set Set an app config value config:import Import a list of configs config:list List all configs config:system:delete Delete a system config value config:system:get Get a system config value config:system:set Set a system config value
You can list all configuration values with one command:
sudo -u www-data php occ config:list
By default, passwords and other sensitive data are omitted from the report, so the output can be posted publicly (e.g. as part of a bug report). In order to generate a full backport of all configuration values the --private flag needs to be set:
sudo -u www-data php occ config:list --private
The exported content can also be imported again to allow the fast setup of similar instances. The import command will only add or update values. Values that exist in the current configuration, but not in the one that is being imported are left untouched:
sudo -u www-data php occ config:import filename.json
It is also possible to import remote files, by piping the input:
sudo -u www-data php occ config:import < local-backup.json
Note
While it is possible to update/set/delete the versions and installation statuses of apps and Nextcloud itself, it is not recommended to do this directly. Use the occ app:enable, occ app:disable and occ app:update commands instead.
Getting a single configuration value
These commands get the value of a single app or system configuration:
sudo -u www-data php occ config:system:get version 19.0.0.12
sudo -u www-data php occ config:app:get activity installed_version 2.2.1
Setting a single configuration value
These commands set the value of a single app or system configuration:
sudo -u www-data php occ config:system:set logtimezone --value="Europe/Berlin" System config value logtimezone set to Europe/Berlin
sudo -u www-data php occ config:app:set files_sharing incoming_server2server_share_enabled --value="yes" Config value incoming_server2server_share_enabled for app files_sharing set to yes
The config:system:set command creates the value, if it does not already exist. To update an existing value, set --update-only:
sudo -u www-data php occ config:system:set doesnotexist --value="true" --type=boolean --update-only Value not updated, as it has not been set before.
Note that in order to write a Boolean, float, or integer value to the configuration file, you need to specify the type on your command. This applies only to the config:system:set command. The following values are known:* boolean
- integer
- float
- string (default)
When you want to e.g. disable the maintenance mode run the following command:
sudo -u www-data php occ config:system:set maintenance --value=false --type=boolean Nextcloud is in maintenance mode - no app have been loaded System config value maintenance set to boolean false
Setting an array configuration value
Some configurations (e.g. the trusted domain setting) are an array of data. In this case, config:system:get for this key will return multiple values:
sudo -u www-data php occ config:system:get trusted_domains localhost nextcloud.local sample.tld
To set one of multiple values, you need to specify the array index as the second name in the config:system:set command, separated by a space. For example, to replace sample.tld with example.com, trusted_domains => 2 needs to be set:
sudo -u www-data php occ config:system:set trusted_domains 2 --value=example.com System config value trusted_domains => 2 set to string example.com
sudo -u www-data php occ config:system:get trusted_domains localhost nextcloud.local example.com
Setting a hierarchical configuration value
Some configurations use hierarchical data. For example, the settings for the Redis cache would look like this in the config.php file:
'redis' => array(
'host' => '/var/run/redis/redis.sock', 'port' => 0, 'dbindex' => 0, 'password' => 'secret', 'timeout' => 1.5,
)
Setting such hierarchical values works similarly to setting an array value above. For this Redis example, use the following commands:
sudo -u www-data php occ config:system:set redis host \ --value=/var/run/redis/redis.sock sudo -u www-data php occ config:system:set redis port --value=0 sudo -u www-data php occ config:system:set redis dbindex --value=0 sudo -u www-data php occ config:system:set redis password --value=secret sudo -u www-data php occ config:system:set redis timeout --value=1.5
Deleting a single configuration value
These commands delete the configuration of an app or system configuration:
sudo -u www-data php occ config:system:delete maintenance:mode System config value maintenance:mode deleted
sudo -u www-data php occ config:app:delete appname provisioning_api Config value provisioning_api of app appname deleted
The delete command will by default not complain if the configuration was not set before. If you want to be notified in that case, set the --error-if-not-exists flag:
sudo -u www-data php occ config:system:delete doesnotexist --error-if-not-exists Config provisioning_api of app appname could not be deleted because it did not exist
Dav commands
A set of commands to create and manage addressbooks and calendars:
dav
dav:create-addressbook Create a dav addressbook
dav:create-calendar Create a dav calendar
dav:delete-calendar Delete a dav calendar
dav:list-calendars List all calendars of a user
dav:move-calendar Move a calendar from a user to another
dav:remove-invalid-shares Remove invalid dav shares
dav:send-event-reminders Sends event reminders
dav:sync-birthday-calendar Synchronizes the birthday calendar
dav:sync-system-addressbook Synchronizes users to the system
addressbook
The syntax for dav:create-addressbook and dav:create-calendar is dav:create-addressbook [user] [name]. This example creates the addressbook mollybook for the user molly:
sudo -u www-data php occ dav:create-addressbook molly mollybook
This example creates a new calendar for molly:
sudo -u www-data php occ dav:create-calendar molly mollycal
Molly will immediately see these in the Calendar and Contacts apps.
dav:delete-calendar [--birthday] [-f|--force] <uid> [<name>] deletes the calendar named name (or the birthday calendar if --birthday is specified) of the user uid. You can use the force option -f or --force to delete the calendar instead of moving it to the trashbin.
This example will delete the calendar mollycal of user molly:
sudo -u www-data php occ dav:delete-calendar molly mollycal
This example will delete the birthday calendar of user molly:
sudo -u www-data php occ dav:delete-calendar --birthday molly
dav:lists-calendars [user] will display a table listing the calendars for a given user. This example will list all calendars for user annie:
sudo -u www-data php occ dav:list-calendars annie
dav::move-calendar [name] [sourceuid] [destinationuid] allows the admin to move a calendar named name from a user sourceuid to the user destinationuid. You can use the force option -f to enforce the move if there are conflicts with existing shares. The system will also generate a new unique calendar name in case there is a conflict over the destination user.
This example will move calendar named personal from user dennis to user sabine:
sudo -u www-data php occ dav:move-calendar personal dennis sabine
dav:remove-invalid-shares will remove invalid shares created by a bug into the calendar app
dav:send-event-reminders is a command that should be called regularly through a dedicated cron job to send event reminder notifications.
See Calendar / CalDAV for more information on how to use this command.
dav:sync-birthday-calendar adds all birthdays to your calendar from addressbooks shared with you. This example syncs to your calendar from user bernie:
sudo -u www-data php occ dav:sync-birthday-calendar bernie
dav:sync-system-addressbook synchronizes all users to the system addressbook:
sudo -u www-data php occ dav:sync-system-addressbook
Database conversion
The SQLite database is good for testing, and for Nextcloud servers with small single-user workloads that do not use sync clients, but production servers with multiple users should use MariaDB, MySQL, or PostgreSQL. You can use occ to convert from SQLite to one of these other databases.
db
db:convert-type Convert the Nextcloud database to the newly
configured one
db:generate-change-script generates the change script from the current
connected db to db_structure.xml
You need:* Your desired database and its PHP connector installed.
- The login and password of a database admin user.
- The database port number, if it is a non-standard port.
This is example converts SQLite to MySQL/MariaDB:
sudo -u www-data php occ db:convert-type mysql oc_dbuser 127.0.0.1 oc_database
For a more detailed explanation see Converting database type
Add missing indices
It might happen that we add from time to time new indices to already existing database tables, for example to improve performance. In order to check your database for missing indices run following command:
sudo -u www-data php occ db:add-missing-indices
Encryption
occ includes a complete set of commands for managing encryption:
encryption
encryption:change-key-storage-root Change key storage root
encryption:decrypt-all Disable server-side encryption and
decrypt all files
encryption:disable Disable encryption
encryption:enable Enable encryption
encryption:enable-master-key Enable the master key. Only available
for fresh installations with no existing
encrypted data! There is also no way to
disable it again.
encryption:encrypt-all Encrypt all files for all users
encryption:list-modules List all available encryption modules
encryption:set-default-module Set the encryption default module
encryption:show-key-storage-root Show current key storage root
encryption:status Lists the current status of encryption
encryption:status shows whether you have active encryption, and your default encryption module. To enable encryption you must first enable the Encryption app, and then run encryption:enable:
sudo -u www-data php occ app:enable encryption sudo -u www-data php occ encryption:enable sudo -u www-data php occ encryption:status
- enabled: true - defaultModule: OC_DEFAULT_MODULE
encryption:change-key-storage-root is for moving your encryption keys to a different folder. It takes one argument, newRoot, which defines your new root folder:
sudo -u www-data php occ encryption:change-key-storage-root /etc/oc-keys
You can see the current location of your keys folder:
sudo -u www-data php occ encryption:show-key-storage-root Current key storage root: default storage location (data/)
encryption:list-modules displays your available encryption modules. You will see a list of modules only if you have enabled the Encryption app. Use encryption:set-default-module [module name] to set your desired module.
encryption:encrypt-all encrypts all data files for all users. You must first put your Nextcloud server into maintenance mode to prevent any user activity until encryption is completed.
encryption:decrypt-all decrypts all user data files, or optionally a single user:
sudo -u www-data php occ encryption:decrypt freda
Users must have enabled recovery keys on their Personal pages. You must first put your Nextcloud server into maintenance mode to prevent any user activity until decryption is completed.
Note that if you do not have master key/recovery key enabled, you can ONLY decrypt files per user, one user at a time and NOT when in maintenance mode. You will need the users’ password to decrypt the files.
Use encryption:disable to disable your encryption module. You must first put your Nextcloud server into maintenance mode to prevent any user activity.
encryption:enable-master-key creates a new master key, which is used for all user data instead of individual user keys. This is especially useful to enable single-sign on. Use this only on fresh installations with no existing data, or on systems where encryption has not already been enabled. It is not possible to disable it.
See Encryption configuration to learn more.
Federation sync
Note
This command is only available when the “Federation” app (federation) is enabled.
Synchronize the addressbooks of all federated Nextcloud servers:
federation:sync-addressbooks Synchronizes addressbooks of all
federated clouds
In Nextcloud, servers connected with federation shares can share user address books, and auto-complete usernames in share dialogs. Use this command to synchronize federated servers:
sudo -u www-data php occ federation:sync-addressbooks
File operations
occ has three commands for managing files in Nextcloud:
files
files:cleanup cleanup filecache
files:scan rescan filesystem
files:scan-app-data rescan the AppData folder
files:transfer-ownership All files' and folders' ownerships are moved to another
user. Outgoing shares are moved as well.
Incoming shares are not moved by default because the
sharing user holds the ownership of the respective files.
There is however an option to enable moving incoming shares.
Scan
The files:scan command scans for new files and updates the file cache. You may rescan all files, per-user, a space-delimited list of users, and limit the search path. If not using --quiet, statistics will be shown at the end of the scan:
sudo -u www-data php occ files:scan --help Description:
rescan filesystem
Usage:
files:scan [options] [--] [<user_id>...]
Arguments:
user_id will rescan all files of the given user(s)
Options:
--output[=OUTPUT] Output format (plain, json or json_pretty, default is plain) [default: "plain"]
-p, --path=PATH limit rescan to this path, eg. --path="/alice/files/Music", the user_id is determined by the path and the user_id parameter and --all are ignored
--generate-metadata Generate metadata for all scanned files
--all will rescan all files of all known users
--unscanned only scan files which are marked as not fully scanned
--shallow do not scan folders recursively
--home-only only scan the home storage, ignoring any mounted external storage or share
-h, --help Display help for the given command. When no command is given display help for the list command
-q, --quiet Do not output any message
-V, --version Display this application version
--ansi|--no-ansi Force (or disable --no-ansi) ANSI output
-n, --no-interaction Do not ask any interactive question
--no-warnings Skip global warnings, show command output only
-v|vv|vvv, --verbose Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug
Verbosity levels of -vv or -vvv are automatically reset to -v
Note for option --unscanned: In general there is a background job (through cron) that will do that scan periodically. The --unscanned option makes it possible to trigger this from the CLI.
When using the --path option, the path must consist of following components:
"user_id/files/path"
or
"user_id/files/mount_name"
or
"user_id/files/mount_name/path"
where the term files is mandatory.
Example:
--path="/alice/files/Music"
In the example above, the user_id alice is determined implicitly from the path component given.
The --path, --all and [user_id] parameters are exclusive - only one must be specified.
Scan appdata
Appdata is a folder inside of the data directory which contains files that are shared between users and can be put there by the server or apps like avatar images, file previews and cached CSS files for example.
Since the regular files scan only operates on user files the occ files:scan-app-data command will check the appdata directory and make sure that the filecache is consistent with the files on the actual storage.:
Usage:
files:scan-app-data [options] [--] [<folder>]
Arguments:
folder The appdata subfolder to scan [default: ""]
Cleanup
files:cleanup tidies up the server’s file cache by deleting all file entries that have no matching entries in the storage table.
Transfer
The command occ files:transfer-ownership can be used to transfer files from one user to another:
Usage:
files:transfer-ownership [options] [--] <source-user> <destination-user>
Arguments:
source-user owner of files which shall be moved destination-user user who will be the new owner of the files
Options:
--path=PATH selectively provide the path to transfer. For example --path="folder_name" [default: ""]
--move move data from source user to root directory of destination user, which must be empty
--transfer-incoming-shares[=TRANSFER-INCOMING-SHARES] transfer incoming user file shares to destination user. Usage: --transfer-incoming-shares=1 (value required) [default: "2"]
You may transfer all files and shares from one user to another. This is useful before removing a user:
sudo -u www-data php occ files:transfer-ownership <source-user> <destination-user>
The transferred files will appear inside a new sub-directory in the destination user’s home.
If the destination user has no files at all (empty home), it is possible to also transfer all the source user’s files by passing --move:
sudo -u www-data php occ files:transfer-ownership --move <source-user> <destination-user>
In this case no sub-directory is created and all files will appear directly in the root of the user’s home.
It is also possible to transfer only one directory along with its contents. This can be useful to restructure your organization or quotas. The --path argument is given as the path to the directory as seen from the source user:
sudo -u www-data php occ files:transfer-ownership --path="path_to_dir" <source-user> <destination-user>
In case the incoming shares must be transferred as well, use the argument --transfer-incoming-shares with 0 or 1 as parameters
sudo -u www-data php occ files:transfer-ownership --transfer-incoming-shares=1 --path="path_to_dir" <source-user> <destination-user>
As an alternative, the system configuration option transferIncomingShares in config.php can be set to true to always transfer incoming shares.
The command line option --transfer-incoming-shares overwrites the config.php option transferIncomingShares. For example, 'transferIncomingShares => true can be overwritten by:
sudo -u www-data php occ files:transfer-ownership --transfer-incoming-shares=0 <source-user> <destination-user>
Users may also transfer files or folders selectively by themselves. See user documentation for details.
Files Sharing
Commands for handling shares:
sharing
sharing:cleanup-remote-storages Cleanup shared storage entries that have no matching entry in the shares_external table sharing:expiration-notification Notify share initiators when a share will expire the next day
Files external
Note
These commands are only available when the “External storage support” app (files_external) is enabled.
Commands for managing external storage:
files_external
files_external:applicable Manage applicable users and groups for a mount files_external:backends Show available authentication and storage backends files_external:config Manage backend configuration for a mount files_external:create Create a new mount configuration files_external:delete Delete an external mount files_external:export Export mount configurations files_external:import Import mount configurations files_external:list List configured mounts files_external:option Manage mount options for a mount files_external:verify Verify mount configuration files_external:notify Listen for active update notifications for a configured external mount
These commands replicate the functionality in the Nextcloud Web GUI, plus two new features: files_external:export and files_external:import.
Use files_external:export to export all admin mounts to stdout, and files_external:export [user_id] to export the mounts of the specified Nextcloud user.
Use files_external:import [filename] to import legacy JSON configurations, and to copy external mount configurations to another Nextcloud server.
Integrity check
Apps which have a Featured tag MUST be code signed with Nextcloud. Unsigned featured apps won’t be installable anymore. Code signing is optional for all third-party applications:
integrity
integrity:check-app Check app integrity using a signature. integrity:check-core Check core integrity using a signature. integrity:sign-app Signs an app using a private key. integrity:sign-core Sign core using a private key
After creating your signing key, sign your app like this example:
sudo -u www-data php occ integrity:sign-app --privateKey=/Users/lukasreschke/contacts.key --certificate=/Users/lukasreschke/CA/contacts.crt --path=/Users/lukasreschke/Programming/contacts
Verify your app:
sudo -u www-data php occ integrity:check-app --path=/pathto/app appname
When it returns nothing, your app is signed correctly. When it returns a message then there is an error. See Code Signing in the Developer manual for more detailed information.
integrity:sign-core is for Nextcloud core developers only.
See Code signing to learn more.
l10n, create JavaScript translation files for apps
This command is for app developers to update their translation mechanism from ownCloud 7 to Nextcloud.
LDAP commands
Note
These commands are only available when the “LDAP user and group backend” app (user_ldap) is enabled.
These LDAP commands appear only when you have enabled the LDAP app. Then you can run the following LDAP commands with occ:
ldap
ldap:check-user checks whether a user exists on LDAP.
ldap:create-empty-config creates an empty LDAP configuration
ldap:delete-config deletes an existing LDAP configuration
ldap:search executes a user or group search
ldap:set-config modifies an LDAP configuration
ldap:show-config shows the LDAP configuration
ldap:show-remnants shows which users are not available on
LDAP anymore, but have remnants in
Nextcloud.
ldap:test-config tests an LDAP configuration
Search for an LDAP user, using this syntax:
sudo -u www-data php occ ldap:search [--group] [--offset="..."] [--limit="..."] search
Searches will match at the beginning of the attribute value only. This example searches for givenNames that start with “rob”:
sudo -u www-data php occ ldap:search "rob"
This will find robbie, roberta, and robin. Broaden the search to find, for example, jeroboam with the asterisk wildcard:
sudo -u www-data php occ ldap:search "*rob"
User search attributes are set with ldap:set-config (below). For example, if your search attributes are givenName and sn you can find users by first name + last name very quickly. For example, you’ll find Terri Hanson by searching for te ha. Trailing whitespaces are ignored.
Check if an LDAP user exists. This works only if the Nextcloud server is connected to an LDAP server:
sudo -u www-data php occ ldap:check-user robert
ldap:check-user will not run a check when it finds a disabled LDAP connection. This prevents users that exist on disabled LDAP connections from being marked as deleted. If you know for certain that the user you are searching for is not in one of the disabled connections, and exists on an active connection, use the --force option to force it to check all active LDAP connections:
sudo -u www-data php occ ldap:check-user --force robert
ldap:create-empty-config creates an empty LDAP configuration. The first one you create has configID s01, and all subsequent configurations that you create are automatically assigned IDs:
sudo -u www-data php occ ldap:create-empty-config
Created new configuration with configID 's01'
Then you can list and view your configurations:
sudo -u www-data php occ ldap:show-config
And view the configuration for a single configID:
sudo -u www-data php occ ldap:show-config s01
ldap:delete-config [configID] deletes an existing LDAP configuration:
sudo -u www-data php occ ldap:delete s01 Deleted configuration with configID 's01'
The ldap:set-config command is for manipulating configurations, like this example that sets search attributes:
sudo -u www-data php occ ldap:set-config s01 ldapAttributesForUserSearch "cn;givenname;sn;displayname;mail"
ldap:test-config tests whether your configuration is correct and can bind to the server:
sudo -u www-data php occ ldap:test-config s01 The configuration is valid and the connection could be established!
ldap:show-remnants is for cleaning up the LDAP mappings table, and is documented in LDAP user cleanup.
Logging commands
These commands view and configure your Nextcloud logging preferences:
log
log:file manipulate Nextcloud logging backend log:manage manage logging configuration log:tail tail the nextcloud logfile [requires app "Log Reader" to be enabled] log:watch watch the nextcloud logfile live [requires app "Log Reader" to be enabled]
Run log:file [--] [--enable] [--file] [--rotate-size] to see your current logging status:
sudo -u www-data php occ log:file Log backend Nextcloud: enabled Log file: /opt/nextcloud/data/nextcloud.log Rotate at: disabled* --enable turns on logging.
- --file sets a different log file path.
- --rotate-size sets your rotation by log file size in bytes with; 0 disables rotation.
log:manage [--backend] [--level] [--timezone] sets your logging backend, log level, and timezone. The defaults are file, warning, and UTC. Available options are:* --backend [file, syslog, errorlog, systemd]
- --level [debug|info|warning|error|fatal]
- --timezone according to https://www.php.net/manual/en/timezones.php
Maintenance commands
Use these commands when you upgrade Nextcloud, manage encryption, perform backups and other tasks that require locking users out until you are finished:
maintenance
maintenance:data-fingerprint update the systems data-fingerprint after a backup is restored maintenance:mimetype:update-db Update database mimetypes and update filecache maintenance:mimetype:update-js Update mimetypelist.js maintenance:mode set maintenance mode maintenance:repair repair this installation maintenance:theme:update Apply custom theme changes maintenance:update:htaccess Updates the .htaccess file
maintenance:mode locks the sessions of all logged-in users, including administrators, and displays a status screen warning that the server is in maintenance mode. Users who are not already logged in cannot log in until maintenance mode is turned off. When you take the server out of maintenance mode logged-in users must refresh their Web browsers to continue working:
sudo -u www-data php occ maintenance:mode --on sudo -u www-data php occ maintenance:mode --off
After restoring a backup of your data directory or the database, you should always call maintenance:data-fingerprint once. This changes the ETag for all files in the communication with sync clients, allowing them to realize a file was modified.
The maintenance:repair command runs automatically during upgrades to clean up the database, so while you can run it manually there usually isn’t a need to:
sudo -u www-data php occ maintenance:repair
maintenance:mimetype:update-db updates the Nextcloud database and file cache with changed mimetypes found in config/mimetypemapping.json. Run this command after modifying config/mimetypemapping.json. If you change a mimetype, run maintenance:mimetype:update-db --repair-filecache to apply the change to existing files.
Run the maintenance:theme:update command if the icons of your custom theme are not updated correctly. This updates the mimetypelist.js and cleares the image cache.
Security
Use these commands to manage server-wide SSL certificates or reset brute-force slow-downs. These are useful when you create federation shares with other Nextcloud servers that use self-signed certificates:
security
security:bruteforce:reset resets brute-force attemps for given IP address security:certificates list trusted certificates security:certificates:import import trusted certificate security:certificates:remove remove trusted certificate
Reset an IP:
sudo -u www-data php occ security:bruteforce:reset [IP address]
This example lists your installed certificates:
sudo -u www-data php occ security:certificates
Import a new certificate:
sudo -u www-data php occ security:certificates:import /path/to/certificate
Remove a certificate:
sudo -u www-data php occ security:certificates:remove [certificate name]
Trashbin
Note
This command is only available when the “Deleted files” app (files_trashbin) is enabled.
The trashbin:cleanup [--all-users] [--] [<user_id>...] command removes the deleted files of the specified users in a space-delimited list, or all users if –all-users is specified.
trashbin
trashbin:cleanup [--all-users] [--] [<user_id>...] Remove deleted files
This example removes the deleted files of all users:
sudo -u www-data php occ trashbin:cleanup --all-users Remove all deleted files for all users Remove deleted files for users on backend Database
freda molly stash rosa edward
This example removes the deleted files of users molly and freda:
sudo -u www-data php occ trashbin:cleanup molly freda Remove deleted files of molly Remove deleted files of freda
User commands
The user commands create and remove users, reset passwords, display a simple report showing how many users you have, and when a user was last logged in:
user
user:add adds a user user:add-app-password adds a app password named "cli" user:delete deletes the specified user user:disable disables the specified user user:enable enables the specified user user:info shows information about the specific user user:lastseen shows when the user was logged in last time user:list shows list of all registered users user:report shows how many users have access user:resetpassword Resets the password of the named user user:setting Read and modify user settings
You can create a new user with their display name, login name, and any group memberships with the user:add command. The syntax is:
user:add [--password-from-env] [--display-name[="..."]] [-g|--group[="..."]] uid
The display-name corresponds to the Full Name on the Users page in your Nextcloud Web UI, and the uid is their Username, which is their login name. This example adds new user Layla Smith, and adds them to the users and db-admins groups. Any groups that do not exist are created:
sudo -u www-data php occ user:add --display-name="Layla Smith"
--group="users" --group="db-admins" layla Enter password: Confirm password: The user "layla" was created successfully Display name set to "Layla Smith" User "layla" added to group "users" User "layla" added to group "db-admins"
Go to your Users page, and you will see your new user.
password-from-env allows you to set the user’s password from an environment variable. This prevents the password from being exposed to all users via the process list, and will only be visible in the history of the user (root) running the command. This also permits creating scripts for adding multiple new users.
To use password-from-env you must run as “real” root, rather than sudo, because sudo strips environment variables. This example adds new user Fred Jones:
export OC_PASS=newpassword su -s /bin/sh www-data -c 'php occ user:add --password-from-env
--display-name="Fred Jones" --group="users" fred'
The user "fred" was created successfully Display name set to "Fred Jones" User "fred" added to group "users"
You can reset any user’s password, including administrators (see Resetting a lost admin password):
sudo -u www-data php occ user:resetpassword layla
Enter a new password: Confirm the new password: Successfully reset password for layla
You may also use password-from-env to reset passwords:
export OC_PASS=newpassword su -s /bin/sh www-data -c 'php occ user:resetpassword --password-from-env
layla' Successfully reset password for layla
You can delete users:
sudo -u www-data php occ user:delete fred
View a user’s most recent login:
sudo -u www-data php occ user:lastseen layla
layla's last login: 09.01.2020 18:46
Read user settings:
sudo -u www-data php occ user:setting layla
- core: - lang: en - login: - lastLogin: 1465910968 - settings: - email: layla@example.tld
Filter by app:
sudo -u www-data php occ user:setting layla core
- core: - lang: en
Get a single setting:
sudo -u www-data php occ user:setting layla core lang en
Set a setting:
sudo -u www-data php occ user:setting layla settings email "new-layla@example.tld"
Delete a setting:
sudo -u www-data php occ user:setting layla settings email --delete
Generate a simple report that counts all users, including users on external user authentication servers such as LDAP:
sudo -u www-data php occ user:report +------------------+----+ | User Report | | +------------------+----+ | Database | 12 | | LDAP | 86 | | | | | total users | 98 | | | | | user directories | 2 | +------------------+----+
Group commands
The group commands create and remove groups, add and remove users in groups, display a list of all users in a group:
group
group:add add a group group:delete remove a group group:adduser add a user to a group group:removeuser remove a user from a group group:list list configured groups
You can create a new group with the group:add command. The syntax is:
group:add [gid]
The gid corresponds to the group name you entering after clicking “Add group” on the Users page in your Nextcloud Web UI. This example adds new group “beer”:
sudo -u www-data php occ group:add beer
Add an existing user to the specified group with the group:adduser command. The syntax is:
group:adduser [gid] [uid]
This example adds the user “denis” to the existing group “beer”:
sudo -u www-data php occ group:adduser beer denis
You can remove user from the group with the group:removeuser command. This example removes the existing user “denis” from the existing group “beer”:
sudo -u www-data php occ group:removeuser beer denis
Remove a group with the group:delete command. Removing a group doesn’t remove users in a group. You cannot remove the “admin” group. This example removes the existing group “beer”:
sudo -u www-data php occ group:delete beer
List configured groups via the group:list command. The syntax is:
group:list [-l|--limit] [-o|--offset] [--output="..."]
limit allows you to specify the number of groups to retrieve.
offset is an offset for retrieving groups.
output specifies the output format (plain, json or json_pretty). Default is plain.
Versions
Note
This command is only available when the “Versions” app (files_versions) is enabled.
Use this command to delete file versions for specific users, or for all users when none are specified:
versions
versions:cleanup Delete versions versions:expire Expires the users file versions
This example deletes all versions for all users:
sudo -u www-data php occ versions:cleanup Delete all versions Delete versions for users on backend Database
freda molly stash rosa edward
You can delete versions for specific users in a space-delimited list:
sudo -u www-data php occ versions:cleanup freda molly Delete versions of freda Delete versions of molly
Command line installation
These commands are available only after you have downloaded and unpacked the Nextcloud archive, and taken no further installation steps.
You can install Nextcloud entirely from the command line. After downloading the tarball and copying Nextcloud into the appropriate directories you can use occ commands in place of running the graphical Installation Wizard.
Then choose your occ options. This lists your available options:
sudo -u www-data php /var/www/nextcloud/occ Nextcloud is not installed - only a limited number of commands are available Nextcloud version 19.0.0
Usage:
[options] command [arguments]
Options:
--help (-h) Display this help message --quiet (-q) Do not output any message --verbose (-v|vv|vvv) Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug --version (-V) Display this application version --ansi Force ANSI output --no-ansi Disable ANSI output --no-interaction (-n) Do not ask any interactive question
Available commands:
check check dependencies of the server environment help Displays help for a command list Lists commands status show some status information app l10n l10n:createjs Create javascript translation files for a given app maintenance maintenance:install install Nextcloud
Display your maintenance:install options:
sudo -u www-data php occ help maintenance:install Nextcloud is not installed - only a limited number of commands are available Usage:
maintenance:install [--database="..."] [--database-name="..."]
[--database-host="..."] [--database-user="..."] [--database-pass[="..."]] [--database-table-prefix[="..."]] [--admin-user="..."] [--admin-pass="..."] [--data-dir="..."]
Options:
--database Supported database type (default: "sqlite")
--database-name Name of the database
--database-host Hostname of the database (default: "localhost")
--database-user User name to connect to the database
--database-pass Password of the database user
--admin-user User name of the admin account (default: "admin")
--admin-pass Password of the admin account
--data-dir Path to data directory (default:
"/var/www/nextcloud/data")
--help (-h) Display this help message
--quiet (-q) Do not output any message
--verbose (-v|vv|vvv) Increase the verbosity of messages: 1 for normal
output, 2 for more verbose output and 3 for debug
--version (-V) Display this application version
--ansi Force ANSI output
--no-ansi Disable ANSI output
--no-interaction (-n) Do not ask any interactive question
This example completes the installation:
cd /var/www/nextcloud/ sudo -u www-data php occ maintenance:install --database "mysql" --database-name "nextcloud" --database-user "root" --database-pass "password" --admin-user "admin" --admin-pass "password" Nextcloud is not installed - only a limited number of commands are available Nextcloud was successfully installed
Supported databases are:
- sqlite (SQLite3 - Nextcloud Community edition only) - mysql (MySQL/MariaDB) - pgsql (PostgreSQL) - oci (Oracle - Nextcloud Enterprise edition only)
Command line upgrade
These commands are available only after you have downloaded upgraded packages or tar archives, and before you complete the upgrade.
List all options, like this example on CentOS Linux:
sudo -u apache php occ upgrade -h Usage: upgrade [--quiet]
Options: --help (-h) Display this help message. --quiet (-q) Do not output any message. --verbose (-v|vv|vvv) Increase the verbosity of messages: 1 for normal output,
2 for more verbose output and 3 for debug.
--version (-V) Display this application version. --ansi Force ANSI output. --no-ansi Disable ANSI output. --no-interaction (-n) Do not ask any interactive question
When you are performing an update or upgrade on your Nextcloud server (see the Maintenance section of this manual), it is better to use occ to perform the database upgrade step, rather than the Web GUI, in order to avoid timeouts. PHP scripts invoked from the Web interface are limited to 3600 seconds. In larger environments this may not be enough, leaving the system in an inconsistent state. After performing all the preliminary steps (see How to upgrade) use this command to upgrade your databases, like this example on CentOS Linux. Note how it details the steps:
sudo -u www-data php occ upgrade Nextcloud or one of the apps require upgrade - only a limited number of commands are available Turned on maintenance mode Checked database schema update Checked database schema update for apps Updated database Updating <gallery> ... Updated <gallery> to 0.6.1 Updating <activity> ... Updated <activity> to 2.1.0 Update successful Turned off maintenance mode
Enabling verbosity displays timestamps:
sudo -u www-data php occ upgrade -v Nextcloud or one of the apps require upgrade - only a limited number of commands are available 2015-06-23T09:06:15+0000 Turned on maintenance mode 2015-06-23T09:06:15+0000 Checked database schema update 2015-06-23T09:06:15+0000 Checked database schema update for apps 2015-06-23T09:06:15+0000 Updated database 2015-06-23T09:06:15+0000 Updated <files_sharing> to 0.6.6 2015-06-23T09:06:15+0000 Update successful 2015-06-23T09:06:15+0000 Turned off maintenance mode
If there is an error it throws an exception, and the error is detailed in your Nextcloud logfile, so you can use the log output to figure out what went wrong, or to use in a bug report:
Turned on maintenance mode Checked database schema update Checked database schema update for apps Updated database Updating <files_sharing> ... Exception ServerNotAvailableException: LDAP server is not available Update failed Turned off maintenance mode
Two-factor authentication
If a two-factor provider app is enabled, it is enabled for all users by default (though the provider can decide whether or not the user has to pass the challenge). In the case of a user losing access to the second factor (e.g. lost phone with two-factor SMS verification), the admin can try to disable the two-factor check for that user via the occ command:
sudo -u www-data php occ twofactor:disable <uid> <provider_id>
Note
This is not supported by all providers.
To re-enable two-factor auth again use the following commmand:
sudo -u www-data php occ twofactor:enable <uid> <provider_id>
Note
This is not supported by all providers.
Disable users
Admins can disable users via the occ command too:
sudo -u www-data php occ user:disable <username>
Use the following command to enable the user again:
sudo -u www-data php occ user:enable <username>
Note that once users are disabled, their connected browsers will be disconnected.
System Tags
List tags:
sudo -u www-data php occ tag:list
Add a tag:
sudo -u www-data php occ tag:add <name> <access>
Edit a tag:
sudo -u www-data php occ tag:edit --name <name> --access <access> <id>
–name and –access are optional.
Delete a tag:
sudo -u www-data php occ tag:delete <id>
Access level
| Level | Visible¹ | Assignable² |
|---|---|---|
| public | Yes | Yes |
| restricted | Yes | No |
| invisible | No | No |
¹ User can see the tag
² User can assign the tag to a file
Debugging
In certain situations it’s necessary to generate debugging information, e.g. before submitting a bug report. You can run occ with debug logging:
sudo -u www-data NC_loglevel=0 php occ -h