T2600G/Security/Access/Control

Control access to the switch by filtering IP address, MAC address or port

Configure Access Control

1. Enable Access Control globally, then select the control mode.
2. Click Add to load the configuration page
   • select the access interface where to control the users' access, and
   • specify the desired IP address/mask, MAC address or ports based on the control mode

Entry Config

Option	Beschreibung
Access Control	Enable or disable Access Control.
Control Mode	Select the control mode for users to log in to the web management page.
IP-based	Only the users within the IP-range you set here are allowed to access the switch.
MAC-based	Only the users with the MAC address you set here are allowed to access the switch.
Port-based	Only the users connecting to the ports you set here are allowed to access the switch.
Port/IP/MAC	Displays the port number/IP address/MAC address of the entry.
Access Interface	Displays the access interface you set of the entry.
Operation	Here you can modify or delete the desired entry.