ISPConfig/Installation

topic - Kurzbeschreibung

Beschreibung

Automated ISPConfig 3 Installation

This tutorial will take you through installing your own ISPConfig 3 single server setup using the ISPConfig auto-installer. This installer follows the old Perfect Server guides but is more modular and easy to follow. If you want to set up a multiserver setup with dedicated servers for each service instead, see the Perfect Multiserver guide.

This guide works for both Debian 10, Debian 11, Ubuntu 20.04, and Ubuntu 22.04, it currently supports only the x86_64 (also known as AMD64) CPU architecture while ARM is not supported. We will use the hostname server1.example.com. Replace it where necessary. The guide requires a freshly installed and empty base OS, do not try to use it on a system where you configured other services already.

Prerequisites

• Operating System: Debian 10, Debian 11, Ubuntu 20.04, or Ubuntu 22.04.
• Intel or AMD 64-Bit CPU Architecture (x86_64, also known as AMD64). ARM CPUs are not supported at the moment.
• The System must have internet access to download and install software with apt.
• Start from a clean- and empty base OS installation.

Testfragen

Testfrage 1

Antwort1

Testfrage 2

Antwort2

Testfrage 3

Antwort3

Testfrage 4

Antwort4

Testfrage 5

Antwort5