Linux/Netzwerk/Konfiguration

Linux/Netzwerk/Konfiguration

Beschreibung

Bezüglich einer aktuellen Anleitung für Debian zum Thema Netzwerk lesen Sie Debian Administratorhandbuch — Konfigurieren des Netzwerks

Tipp

Unter systemd kann networkd für die Netzwerkverwaltung genutzt werden

siehe systemd-networkd(8)

/etc/network/interfaces

siehe /etc/network/interfaces

3 ways to configure the network

The interfaces configuration file at /etc/network/interfaces (this page): for basic or simple configurations (e.g. workstation)
NetworkManager: This is the default for Laptop configuration
Systemd: Debian reference Doc Chapter 5

Multiple addresses

Multiple IP addresses on one Interface

Interface aliasing allows one interface to have multiple IP addresses. This is useful when more than one server is to be visible via the Internet. Note that virtual hosts can support multiple Apache servers with a single IP address. Apache responds to the domain name supplied by the client in the HTTP header. In many other situations, one external IP is needed for each server using a port.

Legacy method

This /etc/network/interfaces text assigns three IP addresses to eth0.

auto eth0
allow-hotplug eth0
iface eth0 inet static
 address 192.168.1.42/24
 gateway 192.168.1.1

auto eth0:0
allow-hotplug eth0:0
iface eth0:0 inet static
 address 192.168.1.43/24

auto eth0:1
allow-hotplug eth0:1
iface eth0:1 inet static
 address 192.168.1.44/24

An alias interface should not have "gateway" or "dns-nameservers"; dynamic IP assignment is permissible.

The above configuration is the previous traditional method that reflects the traditional use of ifconfig to configure network devices. ifconfig has introduced the concept of aliased or virtual interfaces. Those types of virtual interfaces have names of the form interface:integer and ifconfig treats them very similarly to real interfaces.

Nowadays ifupdown uses the ip utility from the iproute2 package instead of ifconfig. The newer ip utility does not use the same concept of aliases or virtual interfaces. However, it supports assigning arbitrary names to the interfaces (they're called labels). ifupdown uses this feature to support aliased interfaces while using ip.

iproute2 method

Also, ifupdown supports specifying multiple interfaces by repeating iface sections with the same interface name. The key difference from the method described above is that all such sections are treated by ifupdown as just one interface, so user can't add or remove them individually. However, up/down commands, as well as scripts, are called for every section as it used to be.

Note however that this method is dangerous! Certain driver/hardware combinations may sometimes fail to bring the link up if no labels are assigned to the alias interfaces. (Seen this on Debian Wheezy and Jessie with RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01) auto-negotiating to 10/full. A similar warning from another person exists in the history of this page.)

This /etc/network/interfaces text assigns three IP addresses to eth0.

auto eth0
allow-hotplug eth0
iface eth0 inet static
 address 192.168.1.42/24
 gateway 192.168.1.1

iface eth0 inet static
 address 192.168.1.43/24

iface eth0 inet static
 address 192.168.1.44/24

# adding IP addresses from different subnets is also possible
iface eth0 inet static
 address 10.10.10.14/24

Manual approach:

auto eth0
allow-hotplug eth0
iface eth0 inet static
 address 192.168.1.42/24
 gateway 192.168.1.1
 up ip addr add 192.168.1.43/24 dev $IFACE label $IFACE:0
 down ip addr del 192.168.1.43/24 dev $IFACE label $IFACE:0
 up ip addr add 192.168.1.44/24 dev $IFACE label $IFACE:1
 down ip addr del 192.168.1.44/24 dev $IFACE label $IFACE:1
 up ip addr add 10.10.10.14/24 dev $IFACE label $IFACE:2
 down ip addr del 10.10.10.14/24 dev $IFACE label $IFACE:2

Anhang

Siehe auch

Links

Weblinks

https://wiki.debian.org/NetworkConfiguration