T2600G/System Summary
Port Status
| Symbol | Port | Beschreibung |
|---|---|---|
| 1000M | not connected | |
| 1000M | 1000Mbps | |
| 1000M | 10Mbps or 100Mbps | |
| SFP | not connected | |
| SFP | 1000Mbps | |
| SFP | 100Mbps |
- Bandwidth Utilization
- Click a port and the bandwidth utilization will be displayed in the diagram
System Info
You can view the system information of each UNIT. The displayed information options are as follows:
- System Descriptiony
Displays the system description of the switch.
- Device Name
Displays the name of the switch. You can edit it on the Device Description page.
- Device Location
Displays the location of the switch. You can edit it on the Device Description page.
- Contact Information
Displays the contact information of the switch. You can edit it on the Device Description page.
- Hardware Version
Displays the hardware version of the switch.
- Firmware Version
Displays the firmware version of the switch.
- Boot Loader Version
Displays the Boot Loader Version of the switch.
- MAC Address
Displays the MAC address of the switch.
- System Time
Displays the system time of the switch.
- Running Time
Displays the running time of the switch.
- Serial Number
Displays the serial number of the switch.
- Jumbo Frame
Displays whether Jumbo Frame is enabled. You can click Settings to jump to the Jumbo Frame configuration page.
- SNTP
Displays whether the switch gets system time from NTP Server. You can click Settings to jump to the System Time configuration page.
- IGMP Snooping
Displays whether IGMP Snooping is enabled. You can click Settings to jump to the IGMP Snooping configuration page.
- SNMP
Displays whether SNMP is enabled. You can click Settings to jump to the SNMP configuration page.
- Spanning Tree
Displays whether Spanning Tree is enabled. You can click Settings to jump to the Spanning Tree configuration page.
- DHCP Relay
Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP Relay configuration page.
- 802.1x
Displays whether 802.1x is enabled. You can click Settings to jump to the 802.1x configuration page.
- HTTP Server
Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP configuration page.
- Telnet
Displays whether Telnet is enabled. You can click Settings to jump to the Telnet configuration page.
- SSH
Displays whether SSH is enabled. You can click Settings to jump to the SSH configuration page.