Port Status
| Symbol |
Port |
Beschreibung
|
|
1000M |
not connected
|
|
1000M |
1000Mbps
|
|
1000M |
10Mbps or 100Mbps
|
|
SFP |
not connected
|
|
SFP |
1000Mbps
|
|
SFP |
100Mbps
|
- Bandwidth Utilization
- Click a port and the bandwidth utilization will be displayed in the diagram
System Info
You can view the system information of each UNIT The displayed information options are as follows:
| Option |
Beschreibung
|
| System Descriptiony |
Displays the system description of the switch
|
| Device Name |
Displays the name of the switch You can edit it on the Device Description page
|
| Device Location |
Displays the location of the switch You can edit it on the Device Description page
|
| Contact Information |
Displays the contact information of the switch You can edit it on the Device Description page
|
| Hardware Version |
Displays the hardware version of the switch
|
| Firmware Version |
Displays the firmware version of the switch
|
| Boot Loader Version |
Displays the Boot Loader Version of the switch
|
| MAC Address |
Displays the MAC address of the switch
|
| System Time |
Displays the system time of the switch
|
| Running Time |
Displays the running time of the switch
|
| Serial Number |
Displays the serial number of the switch
|
| Jumbo Frame |
Displays whether Jumbo Frame is enabled You can click Settings to jump to the Jumbo Frame configuration page
|
| SNTP |
Displays whether the switch gets system time from NTP Server You can click Settings to jump to the System Time configuration page
|
| IGMP Snooping |
Displays whether IGMP Snooping is enabled You can click Settings to jump to the IGMP Snooping configuration page
|
| SNMP |
Displays whether SNMP is enabled You can click Settings to jump to the SNMP configuration page
|
| Spanning Tree |
Displays whether Spanning Tree is enabled You can click Settings to jump to the Spanning Tree configuration page
|
| DHCP Relay |
Displays whether DHCP Relay is enabled You can click Settings to jump to the DHCP Relay configuration page
|
| 8021x |
Displays whether 8021x is enabled You can click Settings to jump to the 8021x configuration page
|
| HTTP Server |
Displays whether HTTP server is enabled You can click Settings to jump to the HTTP configuration page
|
| Telnet |
Displays whether Telnet is enabled You can click Settings to jump to the Telnet configuration page
|
| SSH |
Displays whether SSH is enabled You can click Settings to jump to the SSH configuration page
|
