symlinks

symlinks - Werkzeug zur Verwaltung von symbolischen Verknüpfungen

Beschreibung

Scannen und Ändern symbolischer Links

Symlinks überprüft Verzeichnisse auf symbolische Links und gibt diese auf stdout aus. Jedem Link geht eine Klassifizierung nach relative, absolute, dangling, messy, lengthy oder other_fs voraus.

Symlinks kann auch absolute Links (innerhalb des selben Dateisystems) in relative Links umwandeln und unordentliche und baumelnde Links löschen.

Syntax

Optionen

Option	Beschreibung
-c	convert absolute links (within the same filesystem) to relative links. This permits links to maintain their validity regardless of the mount point used for the filesystem -- a desirable setup in most cases. This option also causes any messy links to be cleaned up, and, if -s was also specified, then lengthy links are also shortened. Links affected by -c are prefixed with changed in the output.
-d	causes dangling links to be removed.
-o	fix links on other filesystems encountered while recursing. Normally, other filesystems encountered are not modified by symlinks.
-r	recursively operate on subdirectories within the same filesystem.
-s	causes lengthy links to be detected.
-t	is used to test for what symlinks would do if -c were specified, but without really changing anything.
-v	show all symbolic links. By default, relative links are not shown unless -v is specified.

Testfragen

Testfrage 1

Antwort1

Testfrage 2

Antwort2

Testfrage 3

Antwort3

Testfrage 4

Antwort4

Testfrage 5

Antwort5