T2600G/System Summary
- System Summary
- Device Description
- System Time
- Daylight Saving Time
- Port- and system-information
- Port Status
- System Summary
- Device Description
- System Time
- Daylight Saving Time
- Information about each port
- Select an UNIT, and move your mouse to a port.
- Then the type, speed and status of this port will be displayed
- Appearance of the port indicates its current status
- Indicates the 1000M port is not connected to a device.
- Indicates the 1000M port is at the speed of 1000Mbps.
- Indicates the 1000M port is at the speed of 10Mbps or 100Mbps.
- Indicates the SFP port is not connected to a device.
- Indicates the SFP port is at the speed of 1000Mbps.
- Indicates the SFP port is at the speed of 100Mbps.
- Bandwidth Utilization
Click a port and the bandwidth utilization will be displayed in the diagram.
- System Info
You can view the system information of each UNIT. The displayed information options are as follows:
- System Description
Displays the system description of the switch.
- Device Name
Displays the name of the switch. You can edit it on the Device Description page.
- Device Location
Displays the location of the switch. You can edit it on the Device Description page.
- Contact Information
Displays the contact information of the switch. You can edit it on the Device Description page.
- Hardware Version
Displays the hardware version of the switch.
- Firmware Version
Displays the firmware version of the switch.
- Boot Loader Version
Displays the Boot Loader Version of the switch.
- MAC Address
Displays the MAC address of the switch.
- System Time
Displays the system time of the switch.
- Running Time
Displays the running time of the switch.
- Serial Number
Displays the serial number of the switch.
- Jumbo Frame
Displays whether Jumbo Frame is enabled. You can click Settings to jump to the Jumbo Frame configuration page.
- SNTP
Displays whether the switch gets system time from NTP Server. You can click Settings to jump to the System Time configuration page.
- IGMP Snooping
Displays whether IGMP Snooping is enabled. You can click Settings to jump to the IGMP Snooping configuration page.
- SNMP
Displays whether SNMP is enabled. You can click Settings to jump to the SNMP configuration page.
Spanning Tree
Displays whether Spanning Tree is enabled. You can click Settings to jump to the Spanning Tree configuration page.
DHCP Relay
Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP Relay configuration page.
802.1x
Displays whether 802.1x is enabled. You can click Settings to jump to the 802.1x configuration page.
HTTP Server
Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP configuration page.
Telnet
Displays whether Telnet is enabled. You can click Settings to jump to the Telnet configuration page.
SSH
Displays whether SSH is enabled. You can click Settings to jump to the SSH configuration page.