Linux/Server/Dienste
Postfix, Dovecot, MariaDB, Rkhunter, and Binutils
Installation
# apt install postfix postfix-mysql postfix-doc mariadb-client mariadb-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d dovecot-mysql dovecot-sieve dovecot-lmtpd sudo
Postfix Konfiguration
General type of mail configuration
Internet Site
System mail name
server1.example.com
Secure MariaDB
# mysql_secure_installation
Answer the questions as follows:
Change the root password? [Y/n] Y New password: <New MariaDB root password> Re-enter new password: <New MariaDB root password> Remove anonymous users? [Y/n] Y Disallow root login remotely? [Y/n] Y Remove test database and access to it? [Y/n] Y Reload privilege tables now? [Y/n] Y
Postfix-Ports öffnen
# vi /etc/postfix/master.cf
Uncomment the submission and smtps sections as follows and add lines where necessary so that this section of the master.cf file looks exactly like the one below.
IMPORTANT:' Remove the # in front of the lines that start with smtps and submission too and not just from the -o lines after these lines!4
submission inet n - - - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject
smtps inet n - - - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
Postfix neu starten
# systemctl restart postfix
MariaDB konfigurieren
Netzwerkschnittstelle
/etc/mysql/mariadb.conf.d/50-server.cnf
- Zeile 'bind-address = 127.0.0.1' auskommentieren
vi /etc/mysql/mariadb.conf.d/50-server.cnf [...] # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # bind-address = 127.0.0.1 [...]
Authentication
Set the password authentication method in MariaDB to native so we can use PHPMyAdmin later to connect as root user:
# echo "update mysql.user set plugin = 'mysql_native_password' where user='root';" | mysql -u root
Edit the file /etc/mysql/debian.cnf and set the MYSQL / MariaDB root password there twice in the rows that start with the word password.
# vi /etc/mysql/debian.cnf
The MySQL root password that needs to be added is shown in red. In this example, the password is "uLVZsW2eLM9Ir".
password = uLVZsW2eLM9Ir
Security Limits
To prevent the error 'Error in accept: Too many open files' we will set higher open file limits for MariaDB now. Open the file /etc/security/limits.conf with an editor:
# vi /etc/security/limits.conf
and add these lines at the end of the file.
mysql soft nofile 65535 mysql hard nofile 65535
Next, create a new directory /etc/systemd/system/mysql.service.d/ with the mkdir command.
# mkdir -p /etc/systemd/system/mysql.service.d/
and add a new file inside:
# vi /etc/systemd/system/mysql.service.d/limits.conf
paste the following lines into that file:
[Service] LimitNOFILE=infinity
Save the file and close the vi editor.
Dienste neu starten
Then we reload systemd and restart MariaDB:
# systemctl daemon-reload # systemctl restart mariadb
Offen Ports prüfen
Now check that networking is enabled. Run
# netstat -tap | grep mysql
The output should look like this:
# netstat -tap | grep mysql tcp6 0 0 [::]:mysql [::]:* LISTEN 16623/mysqld
Amavisd-new, SpamAssassin, and ClamAV
To install amavisd-new, SpamAssassin and ClamAV, we run
# apt -y install amavisd-new spamassassin clamav clamav-daemon unzip bzip2 arj nomarch lzop cabextract p7zip p7zip-full unrar lrzip apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl libdbd-mysql-perl postgrey
The ISPConfig 3 setup uses amavisd which loads the SpamAssassin filter library internally, so we can stop SpamAssassin to free up some RAM:
# systemctl stop spamassassin # systemctl disable spamassassin
Apache Web Server and PHP
Installation
# apt -y install apache2 apache2-doc apache2-utils libapache2-mod-php php7.3 php7.3-common php7.3-gd php7.3-mysql php7.3-imap php7.3-cli php7.3-cgi libapache2-mod-fcgid apache2-suexec-pristine php-pear mcrypt imagemagick libruby libapache2-mod-python php7.3-curl php7.3-intl php7.3-pspell php7.3-recode php7.3-sqlite3 php7.3-tidy php7.3-xmlrpc php7.3-xsl memcached php-memcache php-imagick php-gettext php7.3-zip php7.3-mbstring memcached libapache2-mod-passenger php7.3-soap php7.3-fpm php7.3-opcache php-apcu
Enable Apache modules
Then run the following command to enable the Apache modules suexec, rewrite, ssl, actions, and include (plus dav, dav_fs, and auth_digest if you want to use WebDAV):
# a2enmod suexec rewrite ssl actions include dav_fs dav auth_digest cgi headers actions proxy_fcgi alias
To ensure that the server cannot be attacked through the HTTPOXY vulnerability, we will disable the HTTP_PROXY header in apache globally by adding the configuration file /etc/apache2/conf-available/httpoxy.conf.
Note: The vulnerability is named httpoxy (without 'r') and therefore the file where we add the config to prevent it is named httpoxy.conf and not httproxy.conf, so there is no 'r' missing in the filename.
# vi /etc/apache2/conf-available/httpoxy.conf
Paste the following content to the file:
<IfModule mod_headers.c>
RequestHeader unset Proxy early
</IfModule>
And enable the module by running:
# a2enconf httpoxy # systemctl restart apache2
Let's Encrypt
- ISPConfig support for Let's encrypt
- The Let's Encrypt function allows you to create free SSL certificates for your website from within ISPConfig.
- Installation
# apt install certbot
- Website certificates are created by ISPConfig when you add the web sites
- There are no further steps required than installing LE
Mailman
ISPConfig allows you to manage (create/modify/delete) Mailman mailing lists. If you want to make use of this feature, install Mailman as follows:
# apt install mailman Select at least one language, e.g.: Languages to support: <-- en (English) Missing site list <-- Ok
Before we can start Mailman, a first mailing list called mailman must be created:
# newlist mailman Enter the email of the person running the list: <-- admin email address, e.g. listadmin@example.com Initial mailman password: <-- admin password for the mailman list To finish creating your mailing list, you must edit your /etc/aliases (or equivalent) file by adding the following lines, and possibly running the `newaliases' program: ## mailman mailing list mailman: "|/var/lib/mailman/mail/mailman post mailman" mailman-admin: "|/var/lib/mailman/mail/mailman admin mailman" mailman-bounces: "|/var/lib/mailman/mail/mailman bounces mailman" mailman-confirm: "|/var/lib/mailman/mail/mailman confirm mailman" mailman-join: "|/var/lib/mailman/mail/mailman join mailman" mailman-leave: "|/var/lib/mailman/mail/mailman leave mailman" mailman-owner: "|/var/lib/mailman/mail/mailman owner mailman" mailman-request: "|/var/lib/mailman/mail/mailman request mailman" mailman-subscribe: "|/var/lib/mailman/mail/mailman subscribe mailman" mailman-unsubscribe: "|/var/lib/mailman/mail/mailman unsubscribe mailman" Hit enter to notify mailman owner... <-- ENTER
Open /etc/aliases afterwards...
# vi /etc/aliases
... and add the following lines:
[...] ## mailman mailing list mailman: "|/var/lib/mailman/mail/mailman post mailman" mailman-admin: "|/var/lib/mailman/mail/mailman admin mailman" mailman-bounces: "|/var/lib/mailman/mail/mailman bounces mailman" mailman-confirm: "|/var/lib/mailman/mail/mailman confirm mailman" mailman-join: "|/var/lib/mailman/mail/mailman join mailman" mailman-leave: "|/var/lib/mailman/mail/mailman leave mailman" mailman-owner: "|/var/lib/mailman/mail/mailman owner mailman" mailman-request: "|/var/lib/mailman/mail/mailman request mailman" mailman-subscribe: "|/var/lib/mailman/mail/mailman subscribe mailman" mailman-unsubscribe: "|/var/lib/mailman/mail/mailman unsubscribe mailman"
Run:
# newaliases
and restart Postfix:
# systemctl restart postfix
Finally, we must enable the Mailman Apache configuration:
# ln -s /etc/mailman/apache.conf /etc/apache2/conf-enabled/mailman.conf
This defines the alias /cgi-bin/mailman/ for all Apache vhosts, which means you can access the Mailman admin interface for a list at http://server1.example.com/cgi-bin/mailman/admin/, and the web page for users of a mailing list can be found at http://server1.example.com/cgi-bin/mailman/listinfo/.
Under http://server1.example.com/pipermail you can find the mailing list archives.
Restart Apache afterwards:
# systemctl restart apache2
Then start the Mailman daemon:
# systemctl restart mailman
PureFTPd and Quota
Installation
# apt install pure-ftpd-common pure-ftpd-mysql quota quotatool
Create the dhparam
# openssl dhparam -out /etc/ssl/private/pure-ftpd-dhparams.pem 2048
Konfiguration anpassen
Make sure that the start mode is set to standalone and set VIRTUALCHROOT=true:
# vi /etc/default/pure-ftpd-common [...] STANDALONE_OR_INETD=standalone [...] VIRTUALCHROOT=true [...]
Allow FTP and TLS sessions
- FTP is a very insecure protocol because all passwords and all data are transferred in clear text.
- By using TLS, the whole communication can be encrypted, thus making FTP much more secure.
If you want to allow FTP and TLS sessions, run
# echo 1 > /etc/pure-ftpd/conf/TLS
In order to use TLS, we must create an SSL certificate. I create it in /etc/ssl/private/, therefore I create that directory first:
# mkdir -p /etc/ssl/private/
Generate the SSL certificate
# openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout /etc/ssl/private/pure-ftpd.pem -out /etc/ssl/private/pure-ftpd.pem Country Name (2 letter code) [AU]: <-- Enter your Country Name (e.g., "DE"). State or Province Name (full name) [Some-State]: <-- Enter your State or Province Name. Locality Name (eg, city) []: <-- Enter your City. Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- Enter your Organization Name (e.g., the name of your company). Organizational Unit Name (eg, section) []: <-- Enter your Organizational Unit Name (e.g. "IT Department"). Common Name (eg, YOUR name) []: <-- Enter the Fully Qualified Domain Name of the system (e.g. "server1.example.com"). Email Address []: <-- Enter your Email Address.
Change the permissions of the SSL certificate
# chmod 600 /etc/ssl/private/pure-ftpd.pem
Then restart PureFTPd:
# systemctl restart pure-ftpd-mysql
Edit /etc/fstab
Mine looks like this (I added ,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 to the partition with the mount point /):
# vi /etc/fstab
# /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=45576b38-39e8-4994-b8c1-ea4870e2e614 / ext4 errors=remount-ro,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 0 1 # swap was on /dev/sda5 during installation UUID=8bea0d1e-ec37-4b20-9976-4b7daaa3eb69 none swap sw 0 0 /dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
To enable quota, run these commands:
# mount -o remount / # quotacheck -avugm # quotaon -avug
BIND DNS Server
Installation
# apt -y install bind9 dnsutils haveged
Webalizer and AWStats
Installation
# apt -y install webalizer awstats geoip-database libclass-dbi-mysql-perl libtimedate-perl
Open /etc/cron.d/awstats afterwards...
# vi /etc/cron.d/awstats
... and comment out everything in that file:
#MAILTO=root #*/10 * * * * www-data [ -x /usr/share/awstats/tools/update.sh ] && /usr/share/awstats/tools/update.sh # Generate static reports: #10 03 * * * www-data [ -x /usr/share/awstats/tools/buildstatic.sh ] && /usr/share/awstats/tools/buildstatic.sh
Jailkit
siehe Linux/Server:Jailkit#Installation
fail2ban and UFW Firewall
# apt install fail2ban
To make fail2ban monitor PureFTPd and Dovecot, create the file /etc/fail2ban/jail.local:
# vi /etc/fail2ban/jail.local
And add the following configuration to it.
[pure-ftpd] enabled = true port = ftp filter = pure-ftpd logpath = /var/log/syslog maxretry = 3 [dovecot] enabled = true filter = dovecot logpath = /var/log/mail.log maxretry = 5 [postfix-sasl] enabled = true port = smtp filter = postfix[mode=auth] logpath = /var/log/mail.log maxretry = 3
Restart fail2ban:
# systemctl restart fail2ban
To install the UFW firewall, run this apt command:
# apt install ufw
# ufw allow http # ufw allow https # ufw allow ssh # ufw allow 8080
RoundCube Webmail
In this chapter, we will install the RoundCube webmail client. First, we have to create the database for Roundcube manually as there is currently an issue in the RoundCube Debian installer which causes it to fail to create the database automatically. Run this command to create the database:
echo "CREATE DATABASE roundcube;" | mysql --defaults-file=/etc/mysql/debian.cnf
Then install RoundCube with this command:
apt install roundcube roundcube-core roundcube-mysql roundcube-plugins
The installer will ask the following questions:
Configure database for roundcube with dbconfig.common? <-- yes MySQL application password for roundcube: <-- press enter
Then edit the RoundCube /etc/roundcube/config.inc.php file and adjust a few settings:
vi /etc/roundcube/config.inc.php
Set the default_host and smtp_server to localhost.
$config['default_host'] = 'localhost'; $config['smtp_server'] = 'localhost';
Then edit the Apache roundcube configuration file /etc/apache2/conf-enabled/roundcube.conf:
vi /etc/apache2/conf-enabled/roundcube.conf
And add an alias line for the apache /webmail alias and one for /roundcube, you can add the line right at the beginning of the file. NOTE: Do not use /mail as alias or the ispconfig email module will stop working!
Alias /roundcube /var/lib/roundcube Alias /webmail /var/lib/roundcube
Then reload Apache/
systemctl reload apache2
Now you can access RoundCube as follows:
http://192.168.0.100/webmail http://www.example.com/webmail http://server1.example.com:8080/webmail (after you have installed ISPConfig, see the next chapter)
ISPConfig
Download
To install ISPConfig 3.1
# cd /tmp # wget https://ispconfig.org/downloads/ISPConfig-3.1.15p3.tar.gz # tar xfz ISPConfig-3.1.15p3.tar.gz # cd ispconfig3_install/install/
Install ISPConfig
The next step is to run the ISPConfig installer.
# php -q install.php
This will start the ISPConfig 3 installer. The installer will configure all services like Postfix, Dovecot, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary.
# php -q install.php
--------------------------------------------------------------------------------
_____ ___________ _____ __ _ ____
|_ _/ ___| ___ \ / __ \ / _(_) /__ \
| | \ `--.| |_/ / | / \/ ___ _ __ | |_ _ __ _ _/ /
| | `--. \ __/ | | / _ \| '_ \| _| |/ _` | |_ |
_| |_/\__/ / | | \__/\ (_) | | | | | | | (_| | ___\ \
\___/\____/\_| \____/\___/|_| |_|_| |_|\__, | \____/
__/ |
|___/
--------------------------------------------------------------------------------
>> Initial configuration
Operating System: Debian 10.0 (Buster) or compatible
Following will be a few questions for primary configuration so be careful.
Default values are in [brackets] and can be accepted with <ENTER>.
Tap in "quit" (without the quotes) to stop the installer.
Select language (en,de) [en]: <-- Hit Enter
Installation mode (standard,expert) [standard]: <-- Hit Enter
Full qualified hostname (FQDN) of the server, eg server1.domain.tld [server1.example.com]: <-- Hit Enter
MySQL server hostname [localhost]: <-- Hit Enter
MySQL server port [3306]: <-- Hit Enter
MySQL root username [root]: <-- Hit Enter
MySQL root password []: <-- Enter your MySQL root password
MySQL database to create [dbispconfig]: <-- Hit Enter
MySQL charset [utf8]: <-- Hit Enter
Configuring Postgrey
Configuring Postfix
Generating a 4096 bit RSA private key
.......................................................................++
........................................................................................................................................++
writing new private key to 'smtpd.key'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]: <-- Enter 2 letter country code
State or Province Name (full name) [Some-State]: <-- Enter the name of the state
Locality Name (eg, city) []: <-- Enter your city
Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- Enter company name or press enter
Organizational Unit Name (eg, section) []: <-- Hit Enter
Common Name (e.g. server FQDN or YOUR name) []: <-- Enter the server hostname, in my case: server1.example.com
Email Address []: <-- Hit Enter
Configuring Mailman
Configuring Dovecot
Configuring Spamassassin
Configuring Amavisd
Configuring Getmail
Configuring BIND
Configuring Jailkit
Configuring Pureftpd
Configuring Apache
Configuring vlogger
[INFO] service Metronome XMPP Server not detected
Configuring Ubuntu Firewall
Configuring Fail2ban
[INFO] service OpenVZ not detected
Configuring Apps vhost
Installing ISPConfig
ISPConfig Port [8080]:
Admin password [admin]:
Do you want a secure (SSL) connection to the ISPConfig web interface (y,n) [y]: <-- Hit Enter
Generating RSA private key, 4096 bit long modulus
.......................++
................................................................................................................................++
e is 65537 (0x10001)
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]: <-- Enter 2 letter country code
State or Province Name (full name) [Some-State]: <-- Enter the name of the state
Locality Name (eg, city) []: <-- Enter your city
Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- Enter company name or press enter
Organizational Unit Name (eg, section) []: <-- Hit Enter
Common Name (e.g. server FQDN or YOUR name) []: <-- Enter the server hostname, in my case: server1.example.com
Email Address []: <-- Hit Enter
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []: <-- Hit Enter
An optional company name []: <-- Hit Enter
writing RSA key
Configuring DBServer
Installing ISPConfig crontab
no crontab for root
no crontab for getmail
Detect IP addresses
Restarting services ...
Installation completed.
The installer automatically configures all underlying services, so no manual configuration is needed.
Afterwards you can access ISPConfig 3 under http(s)://server1.example.com:8080/ or http(s)://192.168.0.100:8080/ ( http or https depends on what you chose during installation). Log in with the username admin and the password admin (you should change the default password after your first login):
"ISPConfig Login on Debian 10"
"ISPConfig Dashboard on Debian 10"
The system is now ready to be used.
ISPConfig 3 Manual
In order to learn how to use ISPConfig 3, I strongly recommend downloading the ISPConfig 3 Manual.
On more than 300 pages, it covers the concept behind ISPConfig (admin, resellers, clients), explains how to install and update ISPConfig 3, includes a reference for all forms and form fields in ISPConfig together with examples of valid inputs, and provides tutorials for the most common tasks in ISPConfig 3. It also lines out how to make your server more secure and comes with a troubleshooting section at the end.
Virtual Machine Image Download of this Tutorial
This tutorial is available as ready to use virtual machine image in ovf/ova format that is compatible with VMWare and Virtualbox. The virtual machine image uses the following login details:
SSH / Shell Login
Username: administrator Password: howtoforge
Username: root Password: howtoforge
ISPConfig Login
Username: admin Password: admin
MySQL Login
Username: root Password: howtoforge
The IP of the VM is 192.168.0.100, it can be changed in the file /etc/network/interfaces. Please change all the above passwords to secure the virtual machine.
Links
- Debian: http://www.debian.org/
- ISPConfig/ http://www.ispconfig.org/